Reupholstering Seats Questions

My5ABaby · 06-24-2010, 02:13 PM

My upcoming project will be reupholstering my seats. I'll be looking to pickup a set of TII seats. I would like to use real leather. The other part is that I'm planning on adding heatng and cooling to the seats so I would need perforated leather for part of it. I have a few questions about it for someone who's done it before.

What thickness leather should I look for?

What type of leather?

Any good places to buy it?

Pete_89T2 · 06-25-2010, 10:15 PM

I reupholstered the stock leather seats in my '89T2, but I just bought a set of leather seat skins from leatheseats.com, to replace my worn out stock leather. It's a nice quality automotive-grade leather; not as soft as the Connelly hides you'll find in a Rolls or Jag, but nice enough for the '7 and better than what Mazda provided. The foam padding underneath my seats were still in great shape, so I didn't have to mess with that. If you were at DGRR-X, you may have seen the result - I have the black-on-black T2 that won 1st place in show this year in the 2nd gen category.

Anyway, there was a group buy for these back in '05 at the other forum, which is how I got them. The job was fairly easy, but can be tedious - just take your time. The kit came with plenty of hog rings and a hog ring plier which is needed to do the job. After removing the seats from the car, you'll need to remove the plastic trim on the seats and separate the seat back from the seat bottom. Then you basically just snip/pry open all the old hog rings, and work the old leather off the seats - you'll want to be persuasive but gentle here, as the object is to get them off without mangling the seat cushion foam. Installing the new skins is basically the reverse of removal, but again be patient & persistent - it's harder to get them on than off!

Rotary Inspired · 06-26-2010, 10:47 PM

+1 for leather seats .com. They are actually 4 miles from my house and I have used them several times. Good guys and good quality.

06-24-2010, 02:13 PM	#1
My5ABaby Sigh..... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (6) Posts: 2,377 Rep Power: 19	Reupholstering Seats Questions My upcoming project will be reupholstering my seats. I'll be looking to pickup a set of TII seats. I would like to use real leather. The other part is that I'm planning on adding heatng and cooling to the seats so I would need perforated leather for part of it. I have a few questions about it for someone who's done it before. What thickness leather should I look for? What type of leather? Any good places to buy it? __________________ 1986 Sport: 132k miles, 5A (Sapphire Blue Metallic), Tokico Blues, Racing Beat Springs, Custom LED tailights (only S4 LED tails in the world), SSR Mark II, Racing Beat exhaust, S5 black interior, Rotary Resurrection rebuild at 120k miles Community Service Manual RotorWiki "Imagination costs nothing; we could build square locomotives or fly to Mars" - Felix Wankel Yesterday is history, tomorrow is a mystery, but today is a gift. That is why it is called the "present."

06-26-2010, 10:47 PM	#3
Rotary Inspired Rotary Fan in Training Join Date: Feb 2008 Location: SW OKC iTrader: (0) Posts: 75 Rep Power: 17	+1 for leather seats .com. They are actually 4 miles from my house and I have used them several times. Good guys and good quality. __________________ If you wanna become ASE certified buy the RX7.

06-25-2010, 10:15 PM	#2
Pete_89T2 Lifetime Rotorhead Join Date: Apr 2010 Location: Elkton, MD iTrader: (1) Posts: 874 Rep Power: 15	I reupholstered the stock leather seats in my '89T2, but I just bought a set of leather seat skins from leatheseats.com, to replace my worn out stock leather. It's a nice quality automotive-grade leather; not as soft as the Connelly hides you'll find in a Rolls or Jag, but nice enough for the '7 and better than what Mazda provided. The foam padding underneath my seats were still in great shape, so I didn't have to mess with that. If you were at DGRR-X, you may have seen the result - I have the black-on-black T2 that won 1st place in show this year in the 2nd gen category. Anyway, there was a group buy for these back in '05 at the other forum, which is how I got them. The job was fairly easy, but can be tedious - just take your time. The kit came with plenty of hog rings and a hog ring plier which is needed to do the job. After removing the seats from the car, you'll need to remove the plastic trim on the seats and separate the seat back from the seat bottom. Then you basically just snip/pry open all the old hog rings, and work the old leather off the seats - you'll want to be persuasive but gentle here, as the object is to get them off without mangling the seat cushion foam. Installing the new skins is basically the reverse of removal, but again be patient & persistent - it's harder to get them on than off!