|
RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections. |
Welcome to Rotary Car Club. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
|
Thread Tools | Display Modes |
02-09-2010, 09:12 PM | #1 |
water jacket mod?!!
|
oil temp question
what's a good (healthy) oil temp reading during normal driving (cruise), stop & go traffic and on a "spriritted" driving when its taken from an oil pedestal??
I just hook one up (autometer) and needs to know what temp is good and what's overheating. thanks.
__________________
86GXL BSC streetport + TD07@13psi |
02-09-2010, 10:43 PM | #2 |
Test Whore - Admin
|
They should be pretty much inline with coolant temps. Anything below 160 is too cold in my eyes and anything above 220 is getting too warm, but nothing to panic about.
__________________
-The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. -Angry Motherf*cker Mode ENGAGED- |
02-09-2010, 11:07 PM | #3 | |
rotors excite me
|
That's about what I was thinking, but I was unsure and didn't want to talk out of my ass.
__________________
He isn't a killer. He just wins -- thoroughly. '87 TII 240+ rwhp on my DIY streetport, ~13psi on stock turbo, Racing Beat REVTII exhaust rTek 2.1 awaits a tune Quote:
|
|
02-09-2010, 11:59 PM | #4 |
Test Whore - Admin
|
I applaude you, seriosuly, no sarcasm at all.
__________________
-The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. -Angry Motherf*cker Mode ENGAGED- |
02-10-2010, 05:40 AM | #5 |
RCC Addict
|
|
02-11-2010, 09:40 PM | #8 |
water jacket mod?!!
|
Nick?? Is this you??
It fits perfectlly with my autometer oil temp sensor. Its installed now, but I can't drive the car yet (gotta wait for a few more weeks... still winter here). Thanks!!!!!
__________________
86GXL BSC streetport + TD07@13psi |
03-25-2010, 02:32 PM | #9 |
water jacket mod?!!
|
A follow up. After test driving the car a few car in spring weather (53*f-61*f), the oil temp @ idle is 180*f (the same w/ coolant temp).
But after a few hard pull (3 times) the coolant showing 190*f while the oil temp is 200*f-205*f. I do have an oil cooled turbo only, is this a contrubute factor for oil temp higher than coolant after only a few pull??
__________________
86GXL BSC streetport + TD07@13psi |
03-25-2010, 03:59 PM | #10 |
Test Whore - Admin
|
A factor, yes, the reason no.
205* is nothing to worry about. I wish my oil temps would get that high.
__________________
-The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. -Angry Motherf*cker Mode ENGAGED- |
03-26-2010, 02:36 AM | #11 |
Pirate
|
/\ lol, maybe you went a little overboard, huh T? Also, how about the oil Thermostat you're using? Any plans to make it open at a higher temperature?
------------------ From Grassroots Motorsports Magazine: One reason for lower oil temps is viscosity. Perhaps try using a high quality, lighter weight oil? It will heat up faster, yet still protect the engine just as well. If you want to play around with oil viscosity, the oil temp gauge is your best friend.
__________________
Rotaries:They are NOT that complicated! |
03-26-2010, 08:47 AM | #12 |
Test Whore - Admin
|
I didn't go overboard with the sizes based on what the FD guys are running. With the rad yes, not the coolers. I went overboard with the ducting.
My oil pressures are too high so I need to play with the shims in the front covers bypass. When those get to a reasonable amount, I'll play around with the viscosity a little. The t-stat is a 140*, just like the factory, I might swap it for a 180* if I can find it.
__________________
-The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. -Angry Motherf*cker Mode ENGAGED- |
03-26-2010, 11:12 AM | #13 | |
Rotary Fan in Training
|
Quote:
|
|
03-26-2010, 11:13 AM | #14 |
Rotary Fan in Training
|
|
03-26-2010, 11:20 AM | #15 |
Test Whore - Admin
|
I am still using the Mocal. From what I understand there are two different models, a 140* and a 180*. I BELIEVE that I have the 140*. I will have to check as I know exactely where the destructions are that came with the unit.
__________________
-The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. -Angry Motherf*cker Mode ENGAGED- |