Diary of a Madman; TitaniumTT's see you @ DGRRXI RE-REbuild - Page 71

***TitaniumTT*** · 05-11-2011, 09:16 PM

Quote:

Originally Posted by Nismo

I'll fix your wiper switches assuming you find me a switch that is rebuildable.

SAAAAAHHHHHWWEEEEEEEEEEEEEEEETTTT!!!! Thanks man... lemme snag a b/u next time I'm @ Daves, send ya 2 JIC, mine was TOTALLY dead last time and I actually de-pinned the harness and ran them to a SPDT switch for h/l operation... I think that one is FUBAR.... maybe I'll send you 3, there's a black 'vert that might need one

project86 · 05-11-2011, 06:46 PM

What are your plans for door panels?

***TitaniumTT*** · 05-11-2011, 09:27 PM

Quote:

Originally Posted by project86

What are your plans for door panels?

Nothing big, as they stand right now I've got the stock tops that I died black, my fibergalss bottoms, and in the center is a black material that I've never been thrilled about. A few months ago I had a burn hole repaired in the drivers seat and I had to purchase an entire yard of the grey recaro material to fix it. I've got a LOT left over so i'm going to recover the center section in that. Then my upholsterer is going to get the scraps and build me some new shift boots, ebrake boots, and a heftily padded armrest cover out of the remaining material and some Mercedes black leather. So the black leather and the grey recaro material that is in the seats will ALL match PERFECTLY! Right now they're a little light for my taste. The boots/covers that I have now will live in the 'vert as that car has a grey interior and the same RX8 seats... or it will anyway... and they'll match that interior alot better.

project86 · 05-11-2011, 09:39 PM

^^ oh ok. sounds like a good idea.. im gonna be reconsidering some interior options for mine as well when i start putting it all back in.

FC3S Murray · 05-11-2011, 10:46 PM

Quote:

Originally Posted by project86

^^ oh ok. sounds like a good idea.. im gonna be reconsidering ...

You should reconsider my hand across you face Be-otch

......sorry, I am sexually frustrated since Aunt Flow has been in the house the last week.

Monkman33 · 05-12-2011, 12:00 AM

Quote:

Originally Posted by FC3S Murray

You should reconsider my hand across you face Be-otch

......sorry, I am sexually frustrated since Aunt Flow has been in the house the last week.

If you ride the red tide, you wash up on shore.

in other words, do it in the shower.

project86 · 05-12-2011, 07:49 AM

Quote:

Originally Posted by FC3S Murray

You should reconsider my hand across you face Be-otch

......sorry, I am sexually frustrated since Aunt Flow has been in the house the last week.

haha why on earth would you slap me on the face??

MaczPayne · 05-12-2011, 01:10 AM

There's a list every year!

Touching yourself should be no. 1 on that list.

***TitaniumTT*** · 05-12-2011, 12:23 PM

Quote:

Originally Posted by MaczPayne

There's a list every year!

Touching yourself should be no. 1 on that list.

The list never ends.... it just keeps getting recycled and added tooo and they things get done, then things break then things get added and wash rinse repeat

***TitaniumTT*** · 05-12-2011, 12:22 PM

Quote:

Originally Posted by need RX7

What happens at DGRR stays at DGRR?

Yeah.... pretty much.... there was lube, a dining room table, a bunch of drunk guys.... and in the morning the varnish was stripped off..... and people took pics of me asleep on the pool table

Embedded was the word I was looking for.... tierd.... so very sleepy.... And most of them came out... there are a few chips though.... this is why that bumper gets repainted every damn year.... at least all the oil is finally off the windshield

2gslse · 05-12-2011, 09:37 PM

OK wed. is just about over did you get to Dave's today?

***TitaniumTT*** · 05-12-2011, 09:48 PM

Next Wednesday, the 18th.... and I think I'm going to have to puch it back a wee bit.... for a few reasons....

The boat that I was prepping today was a fucking stye!!! The shrinkwrap tore... or I should say the yard that stored the piece of poo tore the shrinkwrap and 6 month worth of shit flew in, mold, dirt, all kinds of nastiness... it's a miracle the thing is as clean as it is. Of course I realized this AFTER I slept in a little, lalligagged around, did some errands, touched myself, looked at the landi, played with my dogs THEN I uncovered the damn thing.... ugh... I wanted to get the landi's wiring done today as well and if the boat hadn't kicked my ass until 20:30... I probably would've.... bastard made me work for my money this year

So now I'm thinking I'll use Wednesday... the next day off.... yes that is technically 1 day off in 2 weeks.... to do the landi and I'll use the extra time to finish off the small list I have for the FC.

I need to get a hydaylic press as well and I'm going to have to pull the UIM to weld on some fittings, wait for lines to be made etc etc etc...... WHY DIDN"T YOU WELD MY HOOD SHUT!@!!!!!!!

Oh.... I'll be experimenting with brake pads as well

43 days till Limerock!!!!

vex · 05-12-2011, 10:00 PM

I'm tuning tomorrow. you should make the trip.

***TitaniumTT*** · 05-13-2011, 06:38 PM

Quote:

Originally Posted by vex

I'm tuning tomorrow. you should make the trip.

Where are you tuning? You going to my sweetie Davey?

vex · 05-13-2011, 07:29 PM

Quote:

Originally Posted by TitaniumTT

Where are you tuning? You going to my sweetie Davey?

unfortunately I'm not. I'm too poor for that. Tuning will consist of me sitting in the car and hopping I get it drivable.

05-11-2011, 06:46 PM	#2
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	What are your plans for door panels? __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

05-11-2011, 09:39 PM	#4
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	^^ oh ok. sounds like a good idea.. im gonna be reconsidering some interior options for mine as well when i start putting it all back in. __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

05-12-2011, 01:10 AM	#8
MaczPayne Bah! Join Date: Mar 2008 Location: Riverside, SoCal Posts: 442 Rep Power: 18	There's a list every year! Touching yourself should be no. 1 on that list. __________________ Johnson TA FC in the works!

05-12-2011, 09:37 PM	#11
2gslse Rotary Fanatic Join Date: Apr 2008 Location: front royal va Posts: 440 Rep Power: 18	OK wed. is just about over did you get to Dave's today? __________________ ____________________________________________ 1976 Cosmo needing lots of work 1993 Rx-7 410 RWHP single turbo toy 1985 Rx-7 toy/project car 411HP stoplight terror 2001 Dodge ram 4wd.parts hauler 2016 Ram 2500 cause its a hemi 2006 VW TDI commuter __________________________________________ I guarantee there's a pregnant redneck teenager somewhere in a shitty trailer park that thinks "Ebola would be a lovely name for their child"...

05-12-2011, 09:48 PM	#12
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Next Wednesday, the 18th.... and I think I'm going to have to puch it back a wee bit.... for a few reasons.... The boat that I was prepping today was a fucking stye!!! The shrinkwrap tore... or I should say the yard that stored the piece of poo tore the shrinkwrap and 6 month worth of shit flew in, mold, dirt, all kinds of nastiness... it's a miracle the thing is as clean as it is. Of course I realized this AFTER I slept in a little, lalligagged around, did some errands, touched myself, looked at the landi, played with my dogs THEN I uncovered the damn thing.... ugh... I wanted to get the landi's wiring done today as well and if the boat hadn't kicked my ass until 20:30... I probably would've.... bastard made me work for my money this year So now I'm thinking I'll use Wednesday... the next day off.... yes that is technically 1 day off in 2 weeks.... to do the landi and I'll use the extra time to finish off the small list I have for the FC. I need to get a hydaylic press as well and I'm going to have to pull the UIM to weld on some fittings, wait for lines to be made etc etc etc...... WHY DIDN"T YOU WELD MY HOOD SHUT!@!!!!!!! Oh.... I'll be experimenting with brake pads as well 43 days till Limerock!!!! __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

05-12-2011, 10:00 PM	#13
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. Posts: 2,113 Rep Power: 20	I'm tuning tomorrow. you should make the trip. __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group