BNR Stage 1

RotaryDiagnostics · 11-11-2009, 04:23 PM

Bryan put together a Stage 1, S5 turbocharger for me recently and I thought the group might like to see what a thing of beauty looks like.

Note the larger compressor wheel compared to an OEM unit. Now to get all the other upgrade components together and installed.

Many thanks Bryan!

Dzire · 11-11-2009, 04:46 PM

I have a stage 2 and I love it and all the rice hondas hated it

88turboii · 11-11-2009, 08:44 PM

heres my stage 3:

I like it a lot, decent power for cheap. Spool is pretty good too, 10psi at around 3100rpm. Its getting tuned by steve kan this weekend, so ill have some tuned numbers. its making around 300rwhp right now at 10psi

Bryan@BNR · 11-19-2009, 12:44 AM

Thanks for the props. I do my best work on every unit and don't do short cuts. If I get close to done and I see something even questionably wrong, its torn back down and reassembled.

Good luck with your builds. Hope the turbos do what you want them to do!

Bryan@BNR

misterstyx69 · 12-03-2009, 12:09 AM

Heh,,I am "getting" a Stage FOUR..
that stage three looks real nice too..
Maybe I better rethink this.,I may have to much Turbo and not enough Back up!

11-11-2009, 04:46 PM	#2
Dzire Rotary Fanatic Join Date: Apr 2008 Location: B,ham AL/Hollywood FL iTrader: (0) Posts: 151 Rep Power: 17	I have a stage 2 and I love it and all the rice hondas hated it __________________ RX8 2004 GT RX7 1988 TII Last edited by Dzire; 11-11-2009 at 04:57 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-11-2009, 08:44 PM	#3
88turboii destroy, rebuild, repeat Join Date: Feb 2008 Location: Charleston, SC iTrader: (0) Posts: 395 Rep Power: 17	heres my stage 3: I like it a lot, decent power for cheap. Spool is pretty good too, 10psi at around 3100rpm. Its getting tuned by steve kan this weekend, so ill have some tuned numbers. its making around 300rwhp right now at 10psi

11-19-2009, 12:44 AM	#4
Bryan@BNR Rotary Fanatic Join Date: Feb 2008 iTrader: (2) Posts: 302 Rep Power: 17	Thanks for the props. I do my best work on every unit and don't do short cuts. If I get close to done and I see something even questionably wrong, its torn back down and reassembled. Good luck with your builds. Hope the turbos do what you want them to do! Bryan@BNR

12-03-2009, 12:09 AM	#5
misterstyx69 .drives like MrMagoo! Join Date: Feb 2008 Location: Smiths Falls,Ontario iTrader: (5) Posts: 198 Rep Power: 17	Heh,,I am "getting" a Stage FOUR.. that stage three looks real nice too.. Maybe I better rethink this.,I may have to much Turbo and not enough Back up!