Work VSxx on an FC/FD

***TitaniumTT*** · 10-03-2009, 10:33 PM

I bought these rims and tires back in June and bolted them on tonight.... I know but there a track setup and I'm supposed to be at the track tomorrow..... even though I know I won't be. Anywho, the rears fit just fine, the fronts on the other hand will not fit with the center cap in place. Has anyone encountered this before? Is there a different bearing cap that I need to make them work?

fire85gslse · 10-05-2009, 08:56 PM

are they like mine? Mine fit fine.

***TitaniumTT*** · 10-05-2009, 09:27 PM

Yeah..... what the hell? What size/offset are in the front?

SEXY car man!

project86 · 11-24-2009, 02:05 PM

i think you can get diff dust caps for the hubs on the front. my front center caps on my konigs didnt fit either. but i guess offset can affect that...

***Herblenny*** · 11-24-2009, 02:23 PM

I have a set of VS-XXs that came out of an FD. They fit with no issues.

Here are some pics of them and pics of the wheel spec.. And they are forsale

***TitaniumTT*** · 11-24-2009, 03:36 PM

I'm going to need to find a different set of dust caps maybe. I'm thinking I'll use them on the FD, maybe, I dunno. I know I need to sell a set of rims, I have too many.

Good looking rims Phil, what was the fitment line on the FD in the front? Pretty flush with the outside I'd imagine.

***Herblenny*** · 11-24-2009, 04:11 PM

I was going to put it on the Cosmo.. But the FD that came out of it was to the brim of the fenders.

project86 · 11-25-2009, 01:07 AM

did you put them on an fc ever?

project86 · 11-25-2009, 01:09 AM

btw how much do you want for those cause they are the ones i want.. im just worried about fit.

10-03-2009, 10:33 PM	#1
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Work VSxx on an FC/FD I bought these rims and tires back in June and bolted them on tonight.... I know but there a track setup and I'm supposed to be at the track tomorrow..... even though I know I won't be. Anywho, the rears fit just fine, the fronts on the other hand will not fit with the center cap in place. Has anyone encountered this before? Is there a different bearing cap that I need to make them work? __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

10-05-2009, 09:27 PM	#3
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Yeah..... what the hell? What size/offset are in the front? SEXY car man! __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

11-24-2009, 02:05 PM	#4
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN iTrader: (3) Posts: 1,377 Rep Power: 17	i think you can get diff dust caps for the hubs on the front. my front center caps on my konigs didnt fit either. but i guess offset can affect that... __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

11-24-2009, 02:23 PM	#5
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 iTrader: (11) Posts: 644 Rep Power: 10	I have a set of VS-XXs that came out of an FD. They fit with no issues. Here are some pics of them and pics of the wheel spec.. And they are forsale __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

11-24-2009, 03:36 PM	#6
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	I'm going to need to find a different set of dust caps maybe. I'm thinking I'll use them on the FD, maybe, I dunno. I know I need to sell a set of rims, I have too many. Good looking rims Phil, what was the fitment line on the FD in the front? Pretty flush with the outside I'd imagine. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

11-24-2009, 04:11 PM	#7
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 iTrader: (11) Posts: 644 Rep Power: 10	I was going to put it on the Cosmo.. But the FD that came out of it was to the brim of the fenders. __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

11-25-2009, 01:07 AM	#8
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN iTrader: (3) Posts: 1,377 Rep Power: 17	did you put them on an fc ever? __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

11-25-2009, 01:09 AM	#9
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN iTrader: (3) Posts: 1,377 Rep Power: 17	btw how much do you want for those cause they are the ones i want.. im just worried about fit. __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode