What is it?

RotaryDiagnostics · 07-31-2009, 06:20 PM

Bryan,

Can you tell me what I have here? Picked up this turbocharger from someone on that other forum.

It definitely is an S5, based on the N370 stamp on the compressor section and the dual wastegate ports on turbine side. However, the connection points for the oil and coolant pipes are not in the correct position. It appears to me that the unit has been disassembled and reassembled incorrectly so that the central, connecting section is not in the correct rotational position. What do you think?

The first image is of the S5 unit on my car. The rest of the images are of the recently purchased turbo. Notice the difference in the wastegate actuator rod. Strange.

djmtsu · 08-01-2009, 07:57 AM

The wastegate rod was straightened and shortened. I have seen it before. Also it looks, like you said, to be clocked differently.

Maybe it was in a FB or something?

RotaryDiagnostics · 08-01-2009, 02:09 PM

Yeah, don't know about the wastegate rod. It actually looks longer than the 'bent" rod on my turbo.

Contacted the seller today and he said that he had disassembled it to "clean" it and must have reassembled it incorrectly. He never installed it on an engine.

Bryan@BNR · 12-09-2009, 12:39 AM

Yeah that turbo had a S4 wastegate actuator on a S5 turbo. They are different

. I fixed that problem with the correct part

.

08-01-2009, 07:57 AM	#2
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (10) Posts: 4,043 Rep Power: 21	The wastegate rod was straightened and shortened. I have seen it before. Also it looks, like you said, to be clocked differently. Maybe it was in a FB or something? __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-01-2009, 02:09 PM	#3
RotaryDiagnostics Compression Tester Man Join Date: Feb 2009 Location: Mont Alto, PA iTrader: (1) Posts: 137 Rep Power: 16	Yeah, don't know about the wastegate rod. It actually looks longer than the 'bent" rod on my turbo. Contacted the seller today and he said that he had disassembled it to "clean" it and must have reassembled it incorrectly. He never installed it on an engine.

12-09-2009, 12:39 AM	#4
Bryan@BNR Rotary Fanatic Join Date: Feb 2008 iTrader: (2) Posts: 302 Rep Power: 17	Yeah that turbo had a S4 wastegate actuator on a S5 turbo. They are different . I fixed that problem with the correct part .