turbo2 drive shaft problem

townidiot · 04-05-2009, 05:37 PM

im in the middle of putting a s5 turbo motor into my s4 turbo rx7. and today i tried to install the drive shaft, but for some reason its to long.(its a s4 drive shaft) so my question is do i have to get a s5 drive shaft or do i have to cut the s4 to fit?????

-thanks

djmtsu · 04-05-2009, 06:06 PM

If you are using the S5 trans, you have to use the S5 driveshaft.

Basically, it is isn't the engine, its the drivetrain that needs to stay in the family (S4 or S5) trans->driveshaft->differential

From what I have read, you cannot mix and match pieces.

townidiot · 04-05-2009, 06:51 PM

so the differential also has to be s5

djmtsu · 04-05-2009, 07:32 PM

That is the information I got long ago. From what I understand, the only thing that is usable in the drivetrain between S4 and S5 TII's are the axle shafts.

I would hope someone else can chime in.

EJayCe996 · 04-05-2009, 07:43 PM

I'll go verify the diff right now, I have an S5 TII Trans, driveshaft,and an S4 TII rear end.

*the holes line up, but i don't have any spare bolts on hand

Flooder · 04-06-2009, 07:55 PM

That's weird, I've never heard that before.

Phoenix7 · 04-06-2009, 08:43 PM

Um, your forum name makes me want to state the obvious so don't be offended:

Your putting the transmission end first, right?

Now, the automatics ALL use the same DS. The rest are series specific with their pumpkins. How much longer is it?

Flooder · 04-07-2009, 01:46 AM

Yah, you have to put the transmission end of the driveshaft in first then bolt it up to the differential.

townidiot · 04-08-2009, 05:18 PM

yes i put the transmission end in first and its about 3 inches long.i messured it and i think it was 41" how long is the s5 if anyone would know...

Max777 · 04-08-2009, 06:02 PM

Are you sure that you put the shaft all the way in, and that the trans or the diff is REALLY from the turbo model?

I have never heard that the Trubo stuff has to be series specific either, and I trolled the evil forum for like 2 years before I got my fc.

I guesss you really DO learn something new every day!

townidiot · 04-08-2009, 06:24 PM

yep i made sure i put it all the way in.and yes they are both turbo trans and diff.

Flooder · 04-08-2009, 10:25 PM

Just doesnt make sene to me. I dont see how or why it would be different. You probably have an NA rear end.

RETed · 04-09-2009, 04:41 AM

Turbo doesn't matter - they should all swap.
This is not some funky JDM automatic FC turbo driveshaft, or something weird like that, right?

The rear diff have different bolt patterns for turbo versus non-turbo.
Tried checking the bolt pattern on the rear diff side first?

Lastly...
Is the engine + trans mounted and bolted into the car already???

-Ted

townidiot · 04-10-2009, 04:17 PM

yes its a turbo rear,yes the bolt pattern matches, it has a lsd if that would do anything, this used to be my friends car he gave me the drive shaft with it. that he used with his s4 turbo motor,and yes the motor and tranny are both bolted in.

townidiot · 04-10-2009, 04:19 PM

i bought the motor from a importer, would there be a diference with how far the tranny sits back when it comes to jdm to usdm????

04-05-2009, 05:37 PM	#1
townidiot The Newbie Join Date: Apr 2009 iTrader: (0) Posts: 9 Rep Power: 0	turbo2 drive shaft problem im in the middle of putting a s5 turbo motor into my s4 turbo rx7. and today i tried to install the drive shaft, but for some reason its to long.(its a s4 drive shaft) so my question is do i have to get a s5 drive shaft or do i have to cut the s4 to fit????? -thanks

04-05-2009, 06:06 PM	#2
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (10) Posts: 4,043 Rep Power: 21	If you are using the S5 trans, you have to use the S5 driveshaft. Basically, it is isn't the engine, its the drivetrain that needs to stay in the family (S4 or S5) trans->driveshaft->differential From what I have read, you cannot mix and match pieces. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

04-05-2009, 07:32 PM	#4
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (10) Posts: 4,043 Rep Power: 21	That is the information I got long ago. From what I understand, the only thing that is usable in the drivetrain between S4 and S5 TII's are the axle shafts. I would hope someone else can chime in. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

04-05-2009, 07:43 PM	#5
EJayCe996 PPP-P-P-P-POWER! Join Date: Feb 2008 Location: North GP, TX iTrader: (0) Posts: 283 Rep Power: 17	I'll go verify the diff right now, I have an S5 TII Trans, driveshaft,and an S4 TII rear end. the holes line up, but i don't have any spare bolts on hand __________________ 1. Walk through a row of 22", or larger, rims 2. Say you love dubstep 3. ????? 4. PROFIT! Axiomatic: Total cacology. Last edited by EJayCe996; 04-05-2009 at 07:48 PM..*

04-06-2009, 07:55 PM	#6
Flooder Rotary Fanatic Join Date: Feb 2008 Location: Tucson, Arizona iTrader: (0) Posts: 321 Rep Power: 17	That's weird, I've never heard that before. __________________ AZRX7.COM Red 1991 A-package(SOLD) Red 1990 GXL(SOLD) White 1989 GTUs(DEAD) Red 1988 Turbo II(DD) Black 1988 Turbo II(SOLD) Rebuilt and street ported motor, Garrett T04E Turbo, 3" Turbo Inlet Duct/AEM Dry Flow Filter, Your Mom's MBC, Blitz FMIC, 890cc and 1000cc injectors, Tomei FPR, Walbro, Rtek 2.1 ECU, Taurus E-Fan, Turbonetics BOV, 3" Motoria/Corksport Turbo Back Exhaust, Emissions Removed, Greddy Boost Gauge, Megan Racing Water Temp Gauge, 5one5 Triple Gauge Pod, AEM Uego, GP Sports Body Kit, Fiber Images CF Hood, S5 Seats, S5 Tails, S5 Alt, Dual Alt Pulley, D2 Coilovers, NRG Quick Release, Shook Motorsports Radiator, HID's, AN/Steel Braided Oil Cooler Lines, SUPER JDM TYTE DRIFT BUTTON www.DensetsuMotorsports.com www.AZRX7.Com www.FloodersAdventure.com

04-05-2009, 06:51 PM	#3
townidiot The Newbie Join Date: Apr 2009 iTrader: (0) Posts: 9 Rep Power: 0	so the differential also has to be s5

04-07-2009, 01:46 AM	#8
Flooder Rotary Fanatic Join Date: Feb 2008 Location: Tucson, Arizona iTrader: (0) Posts: 321 Rep Power: 17	Yah, you have to put the transmission end of the driveshaft in first then bolt it up to the differential. __________________ AZRX7.COM Red 1991 A-package(SOLD) Red 1990 GXL(SOLD) White 1989 GTUs(DEAD) Red 1988 Turbo II(DD) Black 1988 Turbo II(SOLD) Rebuilt and street ported motor, Garrett T04E Turbo, 3" Turbo Inlet Duct/AEM Dry Flow Filter, Your Mom's MBC, Blitz FMIC, 890cc and 1000cc injectors, Tomei FPR, Walbro, Rtek 2.1 ECU, Taurus E-Fan, Turbonetics BOV, 3" Motoria/Corksport Turbo Back Exhaust, Emissions Removed, Greddy Boost Gauge, Megan Racing Water Temp Gauge, 5one5 Triple Gauge Pod, AEM Uego, GP Sports Body Kit, Fiber Images CF Hood, S5 Seats, S5 Tails, S5 Alt, Dual Alt Pulley, D2 Coilovers, NRG Quick Release, Shook Motorsports Radiator, HID's, AN/Steel Braided Oil Cooler Lines, SUPER JDM TYTE DRIFT BUTTON www.DensetsuMotorsports.com www.AZRX7.Com www.FloodersAdventure.com

04-08-2009, 05:18 PM	#9
townidiot The Newbie Join Date: Apr 2009 iTrader: (0) Posts: 9 Rep Power: 0	yes i put the transmission end in first and its about 3 inches long.i messured it and i think it was 41" how long is the s5 if anyone would know...

04-08-2009, 06:02 PM	#10
Max777 Pirate Join Date: Mar 2008 Location: Central IL iTrader: (5) Posts: 1,323 Rep Power: 18	Are you sure that you put the shaft all the way in, and that the trans or the diff is REALLY from the turbo model? I have never heard that the Trubo stuff has to be series specific either, and I trolled the evil forum for like 2 years before I got my fc. I guesss you really DO learn something new every day! __________________ Rotaries:They are NOT that complicated!

04-08-2009, 06:24 PM	#11
townidiot The Newbie Join Date: Apr 2009 iTrader: (0) Posts: 9 Rep Power: 0	yep i made sure i put it all the way in.and yes they are both turbo trans and diff.

04-08-2009, 10:25 PM	#12
Flooder Rotary Fanatic Join Date: Feb 2008 Location: Tucson, Arizona iTrader: (0) Posts: 321 Rep Power: 17	Just doesnt make sene to me. I dont see how or why it would be different. You probably have an NA rear end. __________________ AZRX7.COM Red 1991 A-package(SOLD) Red 1990 GXL(SOLD) White 1989 GTUs(DEAD) Red 1988 Turbo II(DD) Black 1988 Turbo II(SOLD) Rebuilt and street ported motor, Garrett T04E Turbo, 3" Turbo Inlet Duct/AEM Dry Flow Filter, Your Mom's MBC, Blitz FMIC, 890cc and 1000cc injectors, Tomei FPR, Walbro, Rtek 2.1 ECU, Taurus E-Fan, Turbonetics BOV, 3" Motoria/Corksport Turbo Back Exhaust, Emissions Removed, Greddy Boost Gauge, Megan Racing Water Temp Gauge, 5one5 Triple Gauge Pod, AEM Uego, GP Sports Body Kit, Fiber Images CF Hood, S5 Seats, S5 Tails, S5 Alt, Dual Alt Pulley, D2 Coilovers, NRG Quick Release, Shook Motorsports Radiator, HID's, AN/Steel Braided Oil Cooler Lines, SUPER JDM TYTE DRIFT BUTTON www.DensetsuMotorsports.com www.AZRX7.Com www.FloodersAdventure.com

04-10-2009, 04:17 PM	#14
townidiot The Newbie Join Date: Apr 2009 iTrader: (0) Posts: 9 Rep Power: 0	yes its a turbo rear,yes the bolt pattern matches, it has a lsd if that would do anything, this used to be my friends car he gave me the drive shaft with it. that he used with his s4 turbo motor,and yes the motor and tranny are both bolted in.

04-10-2009, 04:19 PM	#15
townidiot The Newbie Join Date: Apr 2009 iTrader: (0) Posts: 9 Rep Power: 0	i bought the motor from a importer, would there be a diference with how far the tranny sits back when it comes to jdm to usdm????

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode