Auto Power Roll cages and Roll Bars GB

SHPmainMAN · 02-25-2009, 07:04 PM

We are now offering Autopower Roll Bars and roll Cages!

-All of the Cages/Roll bars will fit All model RX7s
The Street Roll bar, Race Roll Bar, and the U-Weld will Fit into the RX3 and RX4
The Roll bars and Cages are made to fit your Vehicle Model.

-All Roll cages/bars are made at the time of purchase and take 4-6 weeks for delivery. This means the cages will be delivered 4-6 weeks after the last person send payment.

-Shipping is $115 inside of the city, and $135 in Rural Areas in the 48 states.

-Descriptions and Photographs are directly from Autopower's website.
Pictures, Description and Pricing Below.

STREET ROLL BAR
This roll bar will give your street car a performance look and style.

* In most cars rear seats and/or convertible top remain in place and useable.
* 4 point roll bar is made of 1.750 x .120 DOM mild steel tube.
* All necessary installation and mounting hardware with back-up plates is included.

Group Buy Pricing
10 Buyers - $345
5 Buyers - $365

RCC Single Order - $380

STREET-SPORT ROLL BAR
Our Street-Sport bar is just what you need for your high performance street car.

* Designed for high performance street use.
* Bolt-in harness mount tube for easy installation of safety harnesses.
* Bolt-In Removable horizontal harness.
* 4 point roll bar is made of 1.750 x .120 DOM mild steel tube.
* All necessary installation and mounting hardware with back-up plates is included.

The Street-Sport Roll Bar has a bold in harness mount tube for easy installation of harnesses and access to the back seat for street use.

Group buy Pricing
10 Buyers - $415
5 Buyers - $435

RCC Single Order - $455

RACE ROLL BAR
The Race roll bar is designed for solo, autocross and high speed time trials. All Race roll bars have a diagonal cross brace and most have a harness mount tube.

* Autopower will select tube size and type for your needs.
* Race roll bars are made with 1.750 x .120 DOM steel.
* Cars weighing more than 3500 lbs. use 2" x 120 ERW steel.
* 4 point mounting with welded diagonal crossbrace.
* All necessary installation and mounting hardware with back-up plates is included.

Group Buy Pricing
10 Buyers - $430
5 Buyers - $445

RCC Single Order - $475

Optional Bolt in Cross bar instead of weld in add $80

BOLT-IN ROLL CAGE

* SCCA & NASA legal for club racing.
* Top of the line in fit and construction.
* These cages are made to order, allowing for tube size and type to be selected.
* Diagonal cross brace and horizontal brace are a permanent weld-in design.

Group Buy Pricing
10 Buyers - $715
5 Buyers - $750

RCC Single Order - $800

U-WELD FRONT CAGE KIT
This cage kit welded to an Autopower roll bar makes a race legal 6 mounting point roll cage. Autopower will choose tubing size when you place your order.

Most Kits Include:

* 2 forward support brace tubes
* Top windshield cross tube
* 4 door guards
* Under dash bar
* 4 top corner gussets
* All necessary installation and mounting hardware with back-up plates included

Group Buy Pricing
10 Buyers - $320
5 Buyers - $350

RCC Single Order - $360

neit_jnf · 02-25-2009, 09:02 PM

interested in race roll bar for 3rd gen

any pictures installed? where do the rear points bolt?

SHPmainMAN · 03-01-2009, 01:51 PM

Quote:

Originally Posted by neit_jnf

interested in race roll bar for 3rd gen

any pictures installed? where do the rear points bolt?

i will contact Autopower tomorrow and get that information for you.

***Herblenny*** · 03-01-2009, 04:22 PM

I would also like to see some pics of the install....

Pics that shows,

1. Seat travel
2. blocking views
3. install mounting points
4. how well its designed to be hidden etc.
5. Harness points, etc

SHPmainMAN · 03-01-2009, 04:39 PM

Quote:

Originally Posted by Herblenny

I would also like to see some pics of the install....

Pics that shows,

1. Seat travel
2. blocking views
3. install mounting points
4. how well its designed to be hidden etc.
5. Harness points, etc

what car are you looking for this information on?

***Herblenny*** · 03-01-2009, 04:41 PM

Rx3
fd
rx8

SHPmainMAN · 03-01-2009, 04:54 PM

when Autopower opens up tomorrow ill get this info for you guys. Ill see if they have some installed pictures of these in all the rotary cars they offer them for.

the following is quoted from Autopowerindustries.com

"Our roll bars and cages meet or exceed the safety requirements for most competition sanctioning organizations. Our bars and cages have been designed to easily install and provide maximum protection. The fit in your vehicle allows quick and easy entry and most importantly, quick exiting, while conforming closely to your interior for a clean, unobtrusive look and feel. All of our bars and cages are certified MIG welded and precision jig notched, providing you with the maximum strength and best fit available. Every roll bar or cage has been designed to fit *specific car models so only minor *modifications are necessary for the instal*lation. Most applications are a true bolt-in and require NO WELDING."

I have personally seen these in an S2000 and it looks great, its real subtle and they come in black. So they do stay hidden until you get the full roll caged that come up into the passenger area instead of behind the seats. but i do know they try to stay away from getting in the way of anything at all, autopower has been around for a while here is a link to their entire application catalog.

http://www.autopowerindustries.com/applicationlist.asp

SHPmainMAN · 03-01-2009, 05:04 PM

In an S13 (gutted)
http://www.vividracing.com/forums/cl...cage-sale.html

In a street 996TT (full interior)
http://www.vividracing.com/forums/pr...roll-cage.html

6 Point in an S13 (full interior)
http://s193.photobucket.com/albums/z...=IMG_8623r.jpg

Install in a VW first page installed pic second page installation (full interior)
http://www.eurotuner.com/techarticle...one/index.html

dregg100 · 03-01-2009, 05:09 PM

mild steel? why not chrome molly?

SHPmainMAN · 03-01-2009, 05:20 PM

I couldn't tell you why they chose one material over another.

***Herblenny*** · 03-01-2009, 05:25 PM

Quote:

Originally Posted by SHPmainMAN

In an M3 (most interior)
http://www.carbonfiberhoods.net/imag...llbar_full.jpg

This one says Kirk Racing.. who's local to me...

SHPmainMAN · 03-01-2009, 05:33 PM

ah your right, i didnt even see that, i was just following google image links. ill edit and remove that.

AzEKnightz · 03-01-2009, 10:18 PM

Damn Mike, you always come up with something I want after I purchase so much off you!! Every damn time >.< That Race Roll Bar caught my attention =)

bigtony08 · 03-02-2009, 12:09 AM

really interestd in a race roll bar if you can tell me if it would work in a vert

sk8world · 03-02-2009, 12:29 AM

is this legal for drag racing -certified?

02-25-2009, 07:04 PM	#1
SHPmainMAN SHP Motorsports Join Date: Jun 2008 Location: Michigan iTrader: (2) Posts: 256 Rep Power: 17	Auto Power Roll cages and Roll Bars GB We are now offering Autopower Roll Bars and roll Cages! -All of the Cages/Roll bars will fit All model RX7s The Street Roll bar, Race Roll Bar, and the U-Weld will Fit into the RX3 and RX4 The Roll bars and Cages are made to fit your Vehicle Model. -All Roll cages/bars are made at the time of purchase and take 4-6 weeks for delivery. This means the cages will be delivered 4-6 weeks after the last person send payment. -Shipping is $115 inside of the city, and $135 in Rural Areas in the 48 states. -Descriptions and Photographs are directly from Autopower's website. Pictures, Description and Pricing Below. STREET ROLL BAR This roll bar will give your street car a performance look and style. * In most cars rear seats and/or convertible top remain in place and useable. * 4 point roll bar is made of 1.750 x .120 DOM mild steel tube. * All necessary installation and mounting hardware with back-up plates is included. Group Buy Pricing 10 Buyers - $345 5 Buyers - $365 RCC Single Order - $380 STREET-SPORT ROLL BAR Our Street-Sport bar is just what you need for your high performance street car. * Designed for high performance street use. * Bolt-in harness mount tube for easy installation of safety harnesses. * Bolt-In Removable horizontal harness. * 4 point roll bar is made of 1.750 x .120 DOM mild steel tube. * All necessary installation and mounting hardware with back-up plates is included. The Street-Sport Roll Bar has a bold in harness mount tube for easy installation of harnesses and access to the back seat for street use. Group buy Pricing 10 Buyers - $415 5 Buyers - $435 RCC Single Order - $455 RACE ROLL BAR The Race roll bar is designed for solo, autocross and high speed time trials. All Race roll bars have a diagonal cross brace and most have a harness mount tube. * Autopower will select tube size and type for your needs. * Race roll bars are made with 1.750 x .120 DOM steel. * Cars weighing more than 3500 lbs. use 2" x 120 ERW steel. * 4 point mounting with welded diagonal crossbrace. * All necessary installation and mounting hardware with back-up plates is included. Group Buy Pricing 10 Buyers - $430 5 Buyers - $445 RCC Single Order - $475 Optional Bolt in Cross bar instead of weld in add $80 BOLT-IN ROLL CAGE * SCCA & NASA legal for club racing. * Top of the line in fit and construction. * These cages are made to order, allowing for tube size and type to be selected. * Diagonal cross brace and horizontal brace are a permanent weld-in design. Group Buy Pricing 10 Buyers - $715 5 Buyers - $750 RCC Single Order - $800 U-WELD FRONT CAGE KIT This cage kit welded to an Autopower roll bar makes a race legal 6 mounting point roll cage. Autopower will choose tubing size when you place your order. Most Kits Include: * 2 forward support brace tubes * Top windshield cross tube * 4 door guards * Under dash bar * 4 top corner gussets * All necessary installation and mounting hardware with back-up plates included Group Buy Pricing 10 Buyers - $320 5 Buyers - $350 RCC Single Order - $360 __________________ SEIBON Summer Special For FD and RX8 1990 Canadian GXL-TII Raffle. Vote NOW!! Last edited by SHPmainMAN; 03-11-2009 at 04:13 PM..

03-01-2009, 04:22 PM	#4
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 iTrader: (11) Posts: 644 Rep Power: 10	I would also like to see some pics of the install.... Pics that shows, 1. Seat travel 2. blocking views 3. install mounting points 4. how well its designed to be hidden etc. 5. Harness points, etc __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny Last edited by Herblenny; 03-01-2009 at 04:36 PM..

03-01-2009, 04:41 PM	#6
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 iTrader: (11) Posts: 644 Rep Power: 10	Rx3 fd rx8 __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

03-01-2009, 04:54 PM	#7
SHPmainMAN SHP Motorsports Join Date: Jun 2008 Location: Michigan iTrader: (2) Posts: 256 Rep Power: 17	when Autopower opens up tomorrow ill get this info for you guys. Ill see if they have some installed pictures of these in all the rotary cars they offer them for. the following is quoted from Autopowerindustries.com "Our roll bars and cages meet or exceed the safety requirements for most competition sanctioning organizations. Our bars and cages have been designed to easily install and provide maximum protection. The fit in your vehicle allows quick and easy entry and most importantly, quick exiting, while conforming closely to your interior for a clean, unobtrusive look and feel. All of our bars and cages are certified MIG welded and precision jig notched, providing you with the maximum strength and best fit available. Every roll bar or cage has been designed to fit specific car models so only minor modifications are necessary for the installation. Most applications are a true bolt-in and require NO WELDING." I have personally seen these in an S2000 and it looks great, its real subtle and they come in black. So they do stay hidden until you get the full roll caged that come up into the passenger area instead of behind the seats. but i do know they try to stay away from getting in the way of anything at all, autopower has been around for a while here is a link to their entire application catalog. http://www.autopowerindustries.com/applicationlist.asp __________________ SEIBON Summer Special For FD and RX8* 1990 Canadian GXL-TII Raffle. Vote NOW!!

03-01-2009, 05:04 PM	#8
SHPmainMAN SHP Motorsports Join Date: Jun 2008 Location: Michigan iTrader: (2) Posts: 256 Rep Power: 17	In an S13 (gutted) http://www.vividracing.com/forums/cl...cage-sale.html In a street 996TT (full interior) http://www.vividracing.com/forums/pr...roll-cage.html 6 Point in an S13 (full interior) http://s193.photobucket.com/albums/z...=IMG_8623r.jpg Install in a VW first page installed pic second page installation (full interior) http://www.eurotuner.com/techarticle...one/index.html __________________ SEIBON Summer Special For FD and RX8 1990 Canadian GXL-TII Raffle. Vote NOW!! Last edited by SHPmainMAN; 03-01-2009 at 05:33 PM..

02-25-2009, 09:02 PM	#2
neit_jnf Boricua! Join Date: Jul 2008 Location: Puerto Rico iTrader: (0) Posts: 99 Rep Power: 17	interested in race roll bar for 3rd gen any pictures installed? where do the rear points bolt?

03-01-2009, 05:09 PM	#9
dregg100 Rotary Fanatic Join Date: Feb 2008 iTrader: (2) Posts: 432 Rep Power: 17	mild steel? why not chrome molly? __________________ '93 SSM Touring-S475... '87 Tii-LS1/T56

03-01-2009, 05:20 PM	#10
SHPmainMAN SHP Motorsports Join Date: Jun 2008 Location: Michigan iTrader: (2) Posts: 256 Rep Power: 17	I couldn't tell you why they chose one material over another. __________________ SEIBON Summer Special For FD and RX8 1990 Canadian GXL-TII Raffle. Vote NOW!!

03-01-2009, 05:33 PM	#12
SHPmainMAN SHP Motorsports Join Date: Jun 2008 Location: Michigan iTrader: (2) Posts: 256 Rep Power: 17	ah your right, i didnt even see that, i was just following google image links. ill edit and remove that. __________________ SEIBON Summer Special For FD and RX8 1990 Canadian GXL-TII Raffle. Vote NOW!!

03-01-2009, 10:18 PM	#13
AzEKnightz ZooM ZooM!! Join Date: Jun 2008 Location: SF, CA iTrader: (1) Posts: 90 Rep Power: 17	Damn Mike, you always come up with something I want after I purchase so much off you!! Every damn time >.< That Race Roll Bar caught my attention =)

03-02-2009, 12:09 AM	#14
bigtony08 obsessed rotard Join Date: Jan 2009 iTrader: (0) Posts: 249 Rep Power: 16	really interestd in a race roll bar if you can tell me if it would work in a vert

03-02-2009, 12:29 AM	#15
sk8world 600rwhp club member. Join Date: Mar 2008 iTrader: (2) Posts: 551 Rep Power: 17	is this legal for drag racing -certified?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode