Tial Wastegate 38mm

[Flooder]

- 347 Stainless Steel Alloy is used for valve and valve housing.

- High temperature silicone Nomex reinforced actuator diaphragm

- 17-7 PH Stainless Steel actuator spring gives consistent pressure at high temperature, resists "relaxing" at temperature to 900F (483C)

- Nitronic 60 Stainless Steel is used for the valve seat, and valve bushing the same material used in the higher level gates for reliability and longevity

- Low Cost

- 100% made is USA

- Wastegates shipped with air fittings and stainless hardware.

- Flanges are an extra cost, they do not come with the wastegate unit.

38mm wastegate utilizing the original Rajay flange style, later also used by Turbonetics Deltagate. Recommended for lower power ranges up to 350hp or mid ranged twin-turbo installations. More specifically, to replace installations utilizing this flange design.

1.0 Bar Spring Silver wastegate always in-stock. Please allow 1-2 weeks for other spring pressures or colors.

Price: $229 + shipping.

[Flooder]

Spring:

.25Bar (3.63 psi)
.4Bar (5.80 psi)
.5Bar (7.25 psi)
.6Bar (8.70 psi)
.7Bar (10.15 psi)
.8Bar (11.60psi)
.9Bar (13.05 psi)
1.0Bar (14.50 psi)

Inlet-Flange:

Mild Steel (+ $12)
Stainless Steel (+ $15)
Stainless Steel Threaded (+ $25)

Oulet-Flange:

Mild Steel (+ $12)
Stainless Steel (+ $15)