![]() |
#1 |
Respecognize!
Join Date: Jul 2008
Location: Δx = ħ/2Δp
Posts: 3,190
Rep Power: 20 ![]() |
FC Turbo II R&P vs. FD R&P
I know the Torsen from an FD fits into the Turbo II but what about the ring and pinion? I am in a quest for a ring and pinion option for my turbo II rear end but nothing has come my way. I know Knight sports make a 4.77 for the FD so i am hoping there is some cross compatibility.
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
![]() |
![]() |
![]() |
#2 |
Respecognize!
Join Date: Jul 2008
Location: Δx = ħ/2Δp
Posts: 3,190
Rep Power: 20 ![]() |
okay so these seem to NOT be interchangeable....i wonder about the front carrier...
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
![]() |
![]() |
![]() |
#3 |
RCC Addict
Join Date: Mar 2008
Location: Honolulu, Hawaii USA
Posts: 1,813
Rep Power: 18 ![]() |
Rings are the same.
Pinions are different. -Ted |
![]() |
![]() |
![]() |
#4 |
Rotary Fan in Training
Join Date: Mar 2008
Location: Czech Republic
Posts: 78
Rep Power: 17 ![]() |
|
![]() |
![]() |
![]() |
#5 |
Rotary Fan in Training
Join Date: Mar 2009
Posts: 39
Rep Power: 0 ![]() |
RX-8 is 8" AFAIK.
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|