FS: Megasquirt W/Wiring harness

DloveN · 11-14-2008, 10:12 AM

I have a Megasquirt v2.2(I think) that I need to get rid of. There is nothing wrong with it or the wiring harness, I'm just going a different route for my fc. It has launch control built in, comes with a full wiring harness(w/injector clips), and a modified cas. I will also throw in a serial cable for tuning. It already has a base map for a S4 TII on it.

I'm asking $325 shipped for all of it.

Whizbang · 11-14-2008, 10:44 AM

so it is setup for fuel AND spark?

RotaryProphet · 11-14-2008, 06:15 PM

By modified CAS, do you mean that you ground off two opposing teeth on the main wheel? Or that it's modified to wire to the megasquirt and uses both wheels correctly?

Does it have the igniters in the case, or does it use the ones in the stock FC coilpacks?

What firmware version were you running?

And finally: any pics of the harness?

DloveN · 11-15-2008, 12:55 AM

Quote:

Originally Posted by Low Impedance

so it is setup for fuel AND spark?

Yes

Quote:

Originally Posted by RotaryProphet

By modified CAS, do you mean that you ground off two opposing teeth on the main wheel? Or that it's modified to wire to the megasquirt and uses both wheels correctly?

Does it have the igniters in the case, or does it use the ones in the stock FC coilpacks?

What firmware version were you running?

And finally: any pics of the harness?

The two opposing teeth are cut off. I didn't do it, I bought the setup from another person. It doesn't have igniters, it uses the stock coilpacks.

I don't know, I'd have to ask the guy that I bought it from. I know the board is PCB2.2

I'll get some pictures of it soon, hopefully tomorrow afternoon.

Flooder · 11-25-2008, 03:44 PM

Im interested in it. Pictures would help me.

What turbo was it setup for? Stock? Hybrid? Or something else?

11-14-2008, 10:12 AM	#1
DloveN The Newbie Join Date: Feb 2008 Location: Montgomery iTrader: (0) Posts: 4 Rep Power: 0	FS: Megasquirt W/Wiring harness I have a Megasquirt v2.2(I think) that I need to get rid of. There is nothing wrong with it or the wiring harness, I'm just going a different route for my fc. It has launch control built in, comes with a full wiring harness(w/injector clips), and a modified cas. I will also throw in a serial cable for tuning. It already has a base map for a S4 TII on it. I'm asking $325 shipped for all of it. __________________ 1988 10th Anniversary (RB Turbo back, HKS F-Con, Rebuilt and Streetported) 1995 240SX SE (Buddy Club Spec II, HKS Springs, KYB AGX's) 1984 GS (Shell) 1983 GS (Parts)

11-14-2008, 10:44 AM	#2
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	so it is setup for fuel AND spark? __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

11-25-2008, 03:44 PM	#5
Flooder Rotary Fanatic Join Date: Feb 2008 Location: Tucson, Arizona iTrader: (0) Posts: 321 Rep Power: 17	Im interested in it. Pictures would help me. What turbo was it setup for? Stock? Hybrid? Or something else? __________________ AZRX7.COM Red 1991 A-package(SOLD) Red 1990 GXL(SOLD) White 1989 GTUs(DEAD) Red 1988 Turbo II(DD) Black 1988 Turbo II(SOLD) Rebuilt and street ported motor, Garrett T04E Turbo, 3" Turbo Inlet Duct/AEM Dry Flow Filter, Your Mom's MBC, Blitz FMIC, 890cc and 1000cc injectors, Tomei FPR, Walbro, Rtek 2.1 ECU, Taurus E-Fan, Turbonetics BOV, 3" Motoria/Corksport Turbo Back Exhaust, Emissions Removed, Greddy Boost Gauge, Megan Racing Water Temp Gauge, 5one5 Triple Gauge Pod, AEM Uego, GP Sports Body Kit, Fiber Images CF Hood, S5 Seats, S5 Tails, S5 Alt, Dual Alt Pulley, D2 Coilovers, NRG Quick Release, Shook Motorsports Radiator, HID's, AN/Steel Braided Oil Cooler Lines, SUPER JDM TYTE DRIFT BUTTON www.DensetsuMotorsports.com www.AZRX7.Com www.FloodersAdventure.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-14-2008, 06:15 PM	#3
RotaryProphet Rotary Fanatic Join Date: Sep 2008 iTrader: (0) Posts: 147 Rep Power: 17	By modified CAS, do you mean that you ground off two opposing teeth on the main wheel? Or that it's modified to wire to the megasquirt and uses both wheels correctly? Does it have the igniters in the case, or does it use the ones in the stock FC coilpacks? What firmware version were you running? And finally: any pics of the harness?