Just a thought about the website

Whizbang · 09-09-2008, 07:20 AM

the organization confuses me. Under the SA22C section, i find things like an RB26 engine, various clutches which i am not certain will fit the car, etc.

Is there an easier way to search your sit for items specific to the FB? Or can you look for items by request?

RHDJapan · 09-10-2008, 10:53 PM

Thank you for the input. We had the R34 RB26 engines in all sections of the site as we were excited to be one of the only places to make these available to the whole world. However, they are quite sac-religous in the rotary world and I will remove them from all Rotary listings. Regarding the clutch overhaul parts, they are universal for all vehicles that the whole clutch kit is available for. Only the listings with full clutch kits are available for your vehicle. i.e. http://www.rhdjapan.com/jdm/NEW-OS-G...da-480HP-11852
Also, to narrow down your search you can enter the site by selecting your vehicle and then searching by brand and for the item you are looking for.

Whizbang · 09-11-2008, 07:24 AM

i wanted to confirm that those clutches were indeed for the 12a and the like. I have never encountered anything "high end" for that car. But i think i am going to be waiting til i get the 13b swap done before i invest in a over the top clutch

Whizbang · 09-11-2008, 07:36 AM

also does OS Giken make clutches for the 13b non turbo? I don't see anything listed (not surprised since i don't recall the engine being sold there)

Whizbang · 09-17-2008, 10:24 PM

...?

RHDJapan · 09-20-2008, 12:33 AM

Sorry about the delayed response. Yes, OS Giken still supports the 12A engine however there is nothing available for the non-turbo 13B as it was not available here in Japan.
OS Giken still have the TS2A, TS2AS, TS2B and TS2BS clutches available for the 12A.
http://www.osgiken.co.jp/pro_clutch/mazda.html

Whizbang · 09-20-2008, 09:48 AM

hmm...i have an idea i may pursue being that i am going to be building a GSLSE based 4 port motor. Might be able to use a 12a clutch with the 12a flywheel if i get it balanced along with everything else...

also, that is the expect life span of a twin disk? Does street driving wear on them heavily?

09-09-2008, 07:20 AM	#1
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	Just a thought about the website the organization confuses me. Under the SA22C section, i find things like an RB26 engine, various clutches which i am not certain will fit the car, etc. Is there an easier way to search your sit for items specific to the FB? Or can you look for items by request? __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

09-10-2008, 10:53 PM	#2
RHDJapan Rotary Fanatic Join Date: Feb 2008 Location: Tokyo iTrader: (1) Posts: 198 Rep Power: 17	Thank you for the input. We had the R34 RB26 engines in all sections of the site as we were excited to be one of the only places to make these available to the whole world. However, they are quite sac-religous in the rotary world and I will remove them from all Rotary listings. Regarding the clutch overhaul parts, they are universal for all vehicles that the whole clutch kit is available for. Only the listings with full clutch kits are available for your vehicle. i.e. http://www.rhdjapan.com/jdm/NEW-OS-G...da-480HP-11852 Also, to narrow down your search you can enter the site by selecting your vehicle and then searching by brand and for the item you are looking for. __________________ RHDJapan Phone: +81-3-3487-1415 Mail: rhdjapan@rhdjapan.com Web: www.rhdjapan.com http://www.myspace.com/rhdjapan http://www.facebook.com/profile.php?id=610024082

09-11-2008, 07:24 AM	#3
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	i wanted to confirm that those clutches were indeed for the 12a and the like. I have never encountered anything "high end" for that car. But i think i am going to be waiting til i get the 13b swap done before i invest in a over the top clutch __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

09-11-2008, 07:36 AM	#4
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	also does OS Giken make clutches for the 13b non turbo? I don't see anything listed (not surprised since i don't recall the engine being sold there) __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

09-17-2008, 10:24 PM	#5
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	...? __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

09-20-2008, 12:33 AM	#6
RHDJapan Rotary Fanatic Join Date: Feb 2008 Location: Tokyo iTrader: (1) Posts: 198 Rep Power: 17	Sorry about the delayed response. Yes, OS Giken still supports the 12A engine however there is nothing available for the non-turbo 13B as it was not available here in Japan. OS Giken still have the TS2A, TS2AS, TS2B and TS2BS clutches available for the 12A. http://www.osgiken.co.jp/pro_clutch/mazda.html __________________ RHDJapan Phone: +81-3-3487-1415 Mail: rhdjapan@rhdjapan.com Web: www.rhdjapan.com http://www.myspace.com/rhdjapan http://www.facebook.com/profile.php?id=610024082

09-20-2008, 09:48 AM	#7
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	hmm...i have an idea i may pursue being that i am going to be building a GSLSE based 4 port motor. Might be able to use a 12a clutch with the 12a flywheel if i get it balanced along with everything else... also, that is the expect life span of a twin disk? Does street driving wear on them heavily? __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode