And the clutch is IN!

P71 · 08-31-2008, 09:02 PM

Took about 4 hours and still no test drive (I broke the new starter, go figure) but the new clutch is in. John did all the heavy lifting and bolt-breaking for me. Went with a Zoom MU-Series as it's an SCCA approved OEM clutch for my class. Old clutch had material wear on the outer edge and more meat in the middle (weird) but the pressure plate was toast. Turned the whole center hub blue!

I've got a list about a zillion miles long to get done before next weekend, but it looks like the old girl will make the SCCA autocross and maybe even stand a chance!

I'll post up some pics and whatnot after I get it going tomorrow.

WE3RX7 · 08-31-2008, 09:27 PM

Can I ask how you broke a starter installing a clutch, lol?

Good job on the clutch and good luck at the races!

Rogue_Wulff · 08-31-2008, 09:43 PM

Sounds like the flywheel should have been resurfaced.

P71 · 08-31-2008, 09:59 PM

The flywheel looked surprisingly good. We'll see how it holds up, but it looks nice. In fact the whole clutch assembly looked fairly new, it was just very, very cheap. Very poor quality reman unit. Hopefully the Zoom will fair better.

Oh, and the starter broke an ear taking it off of the transmission. Beats the hell out of me how, but when I took out the nut a chunk of the ear just fell off into my face. Way to go NAPA Lifetime parts!

WE3RX7 · 08-31-2008, 10:21 PM

Ah -that does suck. At least you can probably get a replacement cheap/free.

P71 · 09-01-2008, 09:14 AM

Hehehehe, getting it more ready! I just scored a set of 14" LE meshies and bought some Rt-615's. We'll be VERY sticky for the autocross!

P71 · 09-01-2008, 06:56 PM

Just got back from the clutch break-in test drive, it works soooo much better! Things are coming together nicely

P71 · 09-01-2008, 09:44 PM

Second test drive was a success as well. Slave cylinder bled out correctly and now the pedal is more towards my liking. It'll do a drag-style launch now and catch a piece of 2nd

josh18_2k · 09-01-2008, 11:48 PM

that thing definately needed some tire..
it'll be fun to see how it handles now with some real rubber! i'm getting rides this weekend lol

P71 · 09-02-2008, 01:27 AM

Sure thing! If not there's always ORPCA on the 21st

Should be wicked with the good tires!

08-31-2008, 09:02 PM	#1
P71 RCC Contributor Join Date: Feb 2008 Location: WA State iTrader: (1) Posts: 651 Rep Power: 17	And the clutch is IN! Took about 4 hours and still no test drive (I broke the new starter, go figure) but the new clutch is in. John did all the heavy lifting and bolt-breaking for me. Went with a Zoom MU-Series as it's an SCCA approved OEM clutch for my class. Old clutch had material wear on the outer edge and more meat in the middle (weird) but the pressure plate was toast. Turned the whole center hub blue! I've got a list about a zillion miles long to get done before next weekend, but it looks like the old girl will make the SCCA autocross and maybe even stand a chance! I'll post up some pics and whatnot after I get it going tomorrow. __________________ Michael Pinto 2008 PDXCGP Drag Racing Season Champion 83 RX-7 GSL; 12A/5-Speed, Red/Red; 100% Stock - 16.072@83.39 01 CV Police Interceptor; 4.6 SOHC V8/4R70W, Dk Blue/Grey; K&N FIPK/RP Oil/Optima/Superchips/Flowmaster 40's/2.5" cat-back - 14.854@92.37 Read my Rx-7 Build Thread! http://rotarycarclub.com/rotary_foru...ed=1#post70955 Get on the new RCC 1/4 Mile ET List! http://www.rotarycarclub.com/rotary_...read.php?t=368 Vote for the ROTM! http://rotarycarclub.com/rotary_foru...play.php?f=125

08-31-2008, 09:59 PM	#4
P71 RCC Contributor Join Date: Feb 2008 Location: WA State iTrader: (1) Posts: 651 Rep Power: 17	The flywheel looked surprisingly good. We'll see how it holds up, but it looks nice. In fact the whole clutch assembly looked fairly new, it was just very, very cheap. Very poor quality reman unit. Hopefully the Zoom will fair better. Oh, and the starter broke an ear taking it off of the transmission. Beats the hell out of me how, but when I took out the nut a chunk of the ear just fell off into my face. Way to go NAPA Lifetime parts! __________________ Michael Pinto 2008 PDXCGP Drag Racing Season Champion 83 RX-7 GSL; 12A/5-Speed, Red/Red; 100% Stock - 16.072@83.39 01 CV Police Interceptor; 4.6 SOHC V8/4R70W, Dk Blue/Grey; K&N FIPK/RP Oil/Optima/Superchips/Flowmaster 40's/2.5" cat-back - 14.854@92.37 Read my Rx-7 Build Thread! http://rotarycarclub.com/rotary_foru...ed=1#post70955 Get on the new RCC 1/4 Mile ET List! http://www.rotarycarclub.com/rotary_...read.php?t=368 Vote for the ROTM! http://rotarycarclub.com/rotary_foru...play.php?f=125

09-01-2008, 09:14 AM	#6
P71 RCC Contributor Join Date: Feb 2008 Location: WA State iTrader: (1) Posts: 651 Rep Power: 17	Hehehehe, getting it more ready! I just scored a set of 14" LE meshies and bought some Rt-615's. We'll be VERY sticky for the autocross! __________________ Michael Pinto 2008 PDXCGP Drag Racing Season Champion 83 RX-7 GSL; 12A/5-Speed, Red/Red; 100% Stock - 16.072@83.39 01 CV Police Interceptor; 4.6 SOHC V8/4R70W, Dk Blue/Grey; K&N FIPK/RP Oil/Optima/Superchips/Flowmaster 40's/2.5" cat-back - 14.854@92.37 Read my Rx-7 Build Thread! http://rotarycarclub.com/rotary_foru...ed=1#post70955 Get on the new RCC 1/4 Mile ET List! http://www.rotarycarclub.com/rotary_...read.php?t=368 Vote for the ROTM! http://rotarycarclub.com/rotary_foru...play.php?f=125

09-01-2008, 06:56 PM	#7
P71 RCC Contributor Join Date: Feb 2008 Location: WA State iTrader: (1) Posts: 651 Rep Power: 17	Just got back from the clutch break-in test drive, it works soooo much better! Things are coming together nicely __________________ Michael Pinto 2008 PDXCGP Drag Racing Season Champion 83 RX-7 GSL; 12A/5-Speed, Red/Red; 100% Stock - 16.072@83.39 01 CV Police Interceptor; 4.6 SOHC V8/4R70W, Dk Blue/Grey; K&N FIPK/RP Oil/Optima/Superchips/Flowmaster 40's/2.5" cat-back - 14.854@92.37 Read my Rx-7 Build Thread! http://rotarycarclub.com/rotary_foru...ed=1#post70955 Get on the new RCC 1/4 Mile ET List! http://www.rotarycarclub.com/rotary_...read.php?t=368 Vote for the ROTM! http://rotarycarclub.com/rotary_foru...play.php?f=125

09-01-2008, 09:44 PM	#8
P71 RCC Contributor Join Date: Feb 2008 Location: WA State iTrader: (1) Posts: 651 Rep Power: 17	Second test drive was a success as well. Slave cylinder bled out correctly and now the pedal is more towards my liking. It'll do a drag-style launch now and catch a piece of 2nd __________________ Michael Pinto 2008 PDXCGP Drag Racing Season Champion 83 RX-7 GSL; 12A/5-Speed, Red/Red; 100% Stock - 16.072@83.39 01 CV Police Interceptor; 4.6 SOHC V8/4R70W, Dk Blue/Grey; K&N FIPK/RP Oil/Optima/Superchips/Flowmaster 40's/2.5" cat-back - 14.854@92.37 Read my Rx-7 Build Thread! http://rotarycarclub.com/rotary_foru...ed=1#post70955 Get on the new RCC 1/4 Mile ET List! http://www.rotarycarclub.com/rotary_...read.php?t=368 Vote for the ROTM! http://rotarycarclub.com/rotary_foru...play.php?f=125

08-31-2008, 09:27 PM	#2
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA iTrader: (1) Posts: 1,812 Rep Power: 18	Can I ask how you broke a starter installing a clutch, lol? Good job on the clutch and good luck at the races!

08-31-2008, 09:43 PM	#3
Rogue_Wulff Non Member Join Date: Jun 2008 iTrader: (0) Posts: 310 Rep Power: 17	Sounds like the flywheel should have been resurfaced.

08-31-2008, 10:21 PM	#5
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA iTrader: (1) Posts: 1,812 Rep Power: 18	Ah -that does suck. At least you can probably get a replacement cheap/free.

09-01-2008, 11:48 PM	#9
josh18_2k Rotary Fanatic Join Date: Feb 2008 Location: Gresham, OR iTrader: (0) Posts: 473 Rep Power: 17	that thing definately needed some tire.. it'll be fun to see how it handles now with some real rubber! i'm getting rides this weekend lol __________________

09-02-2008, 01:27 AM	#10
P71 RCC Contributor Join Date: Feb 2008 Location: WA State iTrader: (1) Posts: 651 Rep Power: 17	Sure thing! If not there's always ORPCA on the 21st Should be wicked with the good tires! __________________ Michael Pinto 2008 PDXCGP Drag Racing Season Champion 83 RX-7 GSL; 12A/5-Speed, Red/Red; 100% Stock - 16.072@83.39 01 CV Police Interceptor; 4.6 SOHC V8/4R70W, Dk Blue/Grey; K&N FIPK/RP Oil/Optima/Superchips/Flowmaster 40's/2.5" cat-back - 14.854@92.37 Read my Rx-7 Build Thread! http://rotarycarclub.com/rotary_foru...ed=1#post70955 Get on the new RCC 1/4 Mile ET List! http://www.rotarycarclub.com/rotary_...read.php?t=368 Vote for the ROTM! http://rotarycarclub.com/rotary_foru...play.php?f=125

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode