Renesis Teardown

WE3RX7 · 02-28-2008, 06:38 PM

Here's my first RX8 contribution to this website.

Quick back story is that I started to rebuild the renesis from my old turbo RX8 (which was sold to a friend, who then bailed on the entire project and let the car go).

When I researched online to find some info on tearing down a renesis, I found a few good links, but not much. So, I decided I'd do my own with pics. I setup a blog to document it, but I'm going to move that content onto this forum in hopes it might drive some more traffic for others looking to do this. The full blog is at http://one320b.blogspot.com/ but I'm not updating anymore since the project is bailed on.

Starting with a full long block (hopefully maybe these pics will help you hook up a missing connection or two..)

WE3RX7 · 02-28-2008, 06:46 PM

I started tearing down the upper side.

For now, I'm going to post these pics up. I took pics of EVERYTHING just so I could refer back to them and make sure all vac lines, electrical connectors, factory clips, etc were in the right place.

I find it easier sometimes to locate something by looking at a photo then reading a book.

I apologize as the images are somewhat blurry when you blow them up...

WE3RX7 · 02-28-2008, 06:48 PM

Continuing teardown...

If you have questions about something, let me know or refer to the blog link for now. At some point I'd like to organize these and have an official writeup.

WE3RX7 · 02-28-2008, 06:50 PM

Continued... it may take me a while to sift through these pics.

WE3RX7 · 02-28-2008, 06:53 PM

Cleaned the photos up so they arent as blurry...

Overall shots of the harness and grounding strap on the block.

WE3RX7 · 02-28-2008, 06:58 PM

More teardown, OMP, ACV, Alternator disconnects, etc.

khronus79 · 05-02-2008, 11:10 PM

no more updates???

WE3RX7 · 05-03-2008, 10:38 PM

I've got tons of 'em... just hadn't found the time to resize all the images, lol.... Will pick this back up soon...

WE3RX7 · 05-09-2008, 09:32 AM

^ There you have it. I'll get the rest of my pics up and between what Kevin probably has written and the photos I've taken, you should be able to tear down and put back together a renesis easily.

I give mazda credit though too, they made the renesis IMHO easier to dismantle than earlier 13Bs.

WE3RX7 · 05-11-2008, 10:10 PM

^ I didnt have to remove the engine/trans, so I couldn't speak to that. I feel as though the actual long block tear is simpler.

05-02-2008, 11:10 PM	#7
khronus79 RCC Contributor Join Date: Feb 2008 Location: Orlando, Fl iTrader: (0) Posts: 661 Rep Power: 17	no more updates??? __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-03-2008, 10:38 PM	#8
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA iTrader: (1) Posts: 1,812 Rep Power: 18	I've got tons of 'em... just hadn't found the time to resize all the images, lol.... Will pick this back up soon...

05-09-2008, 09:32 AM	#9
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA iTrader: (1) Posts: 1,812 Rep Power: 18	^ There you have it. I'll get the rest of my pics up and between what Kevin probably has written and the photos I've taken, you should be able to tear down and put back together a renesis easily. I give mazda credit though too, they made the renesis IMHO easier to dismantle than earlier 13Bs.

05-11-2008, 10:10 PM	#10
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA iTrader: (1) Posts: 1,812 Rep Power: 18	^ I didnt have to remove the engine/trans, so I couldn't speak to that. I feel as though the actual long block tear is simpler.