|
|
|
||||||||
| 2nd Gen RX-7 Engine Parts Only Engine Related parts ONLY! |
 |
|
|
Thread Tools | Display Modes |
|
|
|
|
||||||||
| 2nd Gen RX-7 Engine Parts Only Engine Related parts ONLY! |
|
|
|
Thread Tools | Display Modes |
06-11-2008, 05:14 PM
|
#1 | |
|
rotors excite me
|
WTB: S4 turbo oil inlet
I need the oil inlet line to the turbo, mine cracked and started lots of smoke and some flames all while I was driving on a track. While I have replaced it, it is only a temporary fix. If you aren't sure your line is good, could you please pressure check it at 120psi+? Even if you believe it's good I would appreciate you checking anyway, and more than 150psi shouldn't be necessary.
Please make offers.
__________________
He isn't a killer. He just wins -- thoroughly.   '87 TII 240+ rwhp on my DIY streetport, ~13psi on stock turbo, Racing Beat REVTII exhaust  rTek 2.1 awaits a tune Quote:
|
|
|
|
|
06-11-2008, 10:50 PM
|
#2 | |
|
Mod With The Least :P
|
Mine did the same thing at the SpeedForSale Drag Event last year. Had to drive 2 hours like that
 Mine was leaking were the line meet the turbo flange so I had the local welding shop reweld it, seems to have worked fine 
__________________
Resident Post Whore Polluting the environment one revolution at a time.  www.tennspeed.net Quote:
|
|
|
|
|
|
06-12-2008, 11:57 PM
|
#3 | |
|
rotors excite me
|
We tried welding it, but the guy who helped me didn't seem to have a real steady hand. I might have been able to do it myself, but I didn't try. There were still tiny leaks. Anyway, I went ahead and ordered a new one from Mazda, it ran me about $70 and should arrive next week sometime.
__________________
He isn't a killer. He just wins -- thoroughly. '87 TII 240+ rwhp on my DIY streetport, ~13psi on stock turbo, Racing Beat REVTII exhaust rTek 2.1 awaits a tune Quote:
|
|
|
|
|
Linear Mode
