Version 3.0

oorx7 · 06-06-2008, 04:26 PM

We will be shipping the orders that were placed and payed for first, which will be next week. After they have gone out we will be taking orders. I should have 9 kits left after the payed orders are shipped. We are offering the system with either 4 or 2 port secondary rails, Must decide when you order. However if you order the 2 port, and later decide you will need the 4 port. I will re machine the other ports for a minimal fee (undecided ATM), the overall design of the rail doesn't change between the two.

These were taken yesterday, the date is not set right on my camera. The primary rail will have a one piece stanchion instead of the stacked one. The hardware will all be the same as well. The injectors shown are Bosch 1600's, they were the only ones I had on hand.

Here are the teaser pics.

Special thanks to Kai for letting me use his GZ manifold for testing.

KaiFD3S · 06-06-2008, 08:17 PM

Looks really good Brandon..and your welcome...

KaiFD3S · 06-07-2008, 03:07 AM

Haha I just thought about it this is the second time now, first time was the RE tail light cover that I had to test to see how it fits with the 99 spec lights...

oorx7 · 06-07-2008, 10:29 AM

Yep, your the man.

BTW. This kit will allow 6 injector setups to be a bolt on affair.

Here is a good discussion on the club site.http://www.rx7club.com/showthread.php?t=760655
Check out post #28 these will be the injectors that I am going to be recommending for use with the PFC. The reason being that they will not require resistors or a separate controller for the injectors. They also are superior to your standard store bought Bosch. Ask Glen at Arizona Rotary rockets for details on why. He explained it to me, and it made a lot of sense, but I can't remember all of it now.

dregg100 · 06-07-2008, 11:43 PM

yay!!

CarbonFD · 06-12-2008, 05:35 PM

Still waiting for a price on the rails and fuel pump assembly holder. thanks

Chris

MotoTek · 06-13-2008, 03:10 PM

Are you guys still going to be anodizing these?

oorx7 · 06-13-2008, 03:50 PM

Quote:

Originally Posted by MotoTek

Are you guys still going to be anodizing these?

yes.

dregg100 · 06-14-2008, 10:02 AM

Quote:

Originally Posted by MotoTek

Are you guys still going to be anodizing these?

they are at the anodizer right now.

TRISPEEDFD3S · 06-16-2008, 07:11 AM

ANy color or just one specific color?

oorx7 · 06-16-2008, 07:37 AM

Mostly blue, but did a couple in red for specific customers.

13bmaniac · 06-16-2008, 10:00 AM

nice...do you have any estimate shipping date for customers that already pay for the sistem???

cheers

oorx7 · 06-16-2008, 10:18 AM

They will be going out this week. Closer to the end.

06-06-2008, 04:26 PM	#1
oorx7 Rotary Fan in Training Join Date: Mar 2008 iTrader: (0) Posts: 57 Rep Power: 17	Version 3.0 We will be shipping the orders that were placed and payed for first, which will be next week. After they have gone out we will be taking orders. I should have 9 kits left after the payed orders are shipped. We are offering the system with either 4 or 2 port secondary rails, Must decide when you order. However if you order the 2 port, and later decide you will need the 4 port. I will re machine the other ports for a minimal fee (undecided ATM), the overall design of the rail doesn't change between the two. These were taken yesterday, the date is not set right on my camera. The primary rail will have a one piece stanchion instead of the stacked one. The hardware will all be the same as well. The injectors shown are Bosch 1600's, they were the only ones I had on hand. Here are the teaser pics. Special thanks to Kai for letting me use his GZ manifold for testing. Last edited by oorx7; 06-06-2008 at 04:32 PM.. Reason: Props to Kai

06-07-2008, 03:07 AM	#3
KaiFD3S Rotary Fanatic Join Date: Mar 2008 iTrader: (0) Posts: 437 Rep Power: 17	Haha I just thought about it this is the second time now, first time was the RE tail light cover that I had to test to see how it fits with the 99 spec lights... __________________ RE AD FACER 9

06-07-2008, 10:29 AM	#4
oorx7 Rotary Fan in Training Join Date: Mar 2008 iTrader: (0) Posts: 57 Rep Power: 17	Yep, your the man. BTW. This kit will allow 6 injector setups to be a bolt on affair. Here is a good discussion on the club site.http://www.rx7club.com/showthread.php?t=760655 Check out post #28 these will be the injectors that I am going to be recommending for use with the PFC. The reason being that they will not require resistors or a separate controller for the injectors. They also are superior to your standard store bought Bosch. Ask Glen at Arizona Rotary rockets for details on why. He explained it to me, and it made a lot of sense, but I can't remember all of it now. Last edited by oorx7; 06-07-2008 at 10:34 AM..

06-07-2008, 11:43 PM	#5
dregg100 Rotary Fanatic Join Date: Feb 2008 iTrader: (2) Posts: 432 Rep Power: 17	yay!! __________________ '93 SSM Touring-S475... '87 Tii-LS1/T56

06-13-2008, 03:10 PM	#7
MotoTek Always Under Construction Join Date: Mar 2008 Location: La Playa, CA iTrader: (1) Posts: 302 Rep Power: 17	Are you guys still going to be anodizing these? __________________ BLACKADDE™ \| ADGT RX7 \|

06-06-2008, 08:17 PM	#2
KaiFD3S Rotary Fanatic Join Date: Mar 2008 iTrader: (0) Posts: 437 Rep Power: 17	Looks really good Brandon..and your welcome... __________________ RE AD FACER 9

06-12-2008, 05:35 PM	#6
CarbonFD Rotary Fan in Training Join Date: Mar 2008 iTrader: (0) Posts: 46 Rep Power: 0	Still waiting for a price on the rails and fuel pump assembly holder. thanks Chris

06-16-2008, 07:11 AM	#10
TRISPEEDFD3S Rotary Fan in Training Join Date: Feb 2008 Location: NORCAL iTrader: (0) Posts: 89 Rep Power: 17	ANy color or just one specific color? __________________ My Cardomain! http://www.cardomain.com/ride/2179693

06-16-2008, 07:37 AM	#11
oorx7 Rotary Fan in Training Join Date: Mar 2008 iTrader: (0) Posts: 57 Rep Power: 17	Mostly blue, but did a couple in red for specific customers.

06-16-2008, 10:00 AM	#12
13bmaniac Rotary Fan in Training Join Date: Mar 2008 iTrader: (0) Posts: 57 Rep Power: 17	nice...do you have any estimate shipping date for customers that already pay for the sistem??? cheers

06-16-2008, 10:18 AM	#13
oorx7 Rotary Fan in Training Join Date: Mar 2008 iTrader: (0) Posts: 57 Rep Power: 17	They will be going out this week. Closer to the end. Last edited by oorx7; 06-16-2008 at 10:23 AM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode