FD Air pump Deletion Idler (Interest feeler)

Garfinkles Motor Works · 04-29-2008, 12:04 AM

- Remove your air pump and still have full belt contact with water pump
- Idler will have a CNC cut Aluminum pulley with a double row sealed bearing rated at 12000RPM

The brackets and the shaft are steel. The shaft can be adjusted forward and back for belt alignment with belt adjustment being the same as stock with the stock sized belt. Single turbo applications may use a smaller belt which will allow the idle to tuck closer to the motor.

Pricing will be based on interest.

04-29-2008, 12:04 AM	#1
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	FD Air pump Deletion Idler (Interest feeler) - Remove your air pump and still have full belt contact with water pump - Idler will have a CNC cut Aluminum pulley with a double row sealed bearing rated at 12000RPM The brackets and the shaft are steel. The shaft can be adjusted forward and back for belt alignment with belt adjustment being the same as stock with the stock sized belt. Single turbo applications may use a smaller belt which will allow the idle to tuck closer to the motor. Pricing will be based on interest.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode