94 Chaste white build

fdeeznutz · 02-26-2008, 08:13 PM

The car, as purchased in 2002 54k miles(minus the wing, Eibachs, and Mazdaspeed MS01 wheels)
It had Apex-i intakes, Trust catback, mid+down pipe, Power FC. I later added a Eibach's, Peter Farrell SMIC, Pettit power pulley, Greddy pullies, HKS BOV, 99 spec front lip, and Advan 18's.
The car made 301rwhp and 298 tq at 10psi. Had the Power FC tuned by Steve Kahn.
Pictures in chronological order.

This was the last picture taken right before I started tearing into the motor.^^

I originally had a leak coming from the front cover on a 15k mile reman.
I was only going to fix the oil leak and put new motor mounts in but things started looking bad.
I pulled the turbos and they were absolutely trashed, huge cracks, oil coming from everywhere. I tossed them out and started looking around for something to replace the poor turbos. Meanwhile I sent the motor off to have them tear it down fix the leak and make sure everything looked good. Well.....I got a call a little later, it needed a rebuild. I was starting to see a chance for me to change nearly everything at once, not an easy task.
I wanted a fairly reliable car once I had everything done so no huge turbos for me. I am not building my car for HP. I want it to be responsive and fun to drive.
List of parts, almost everything is new.

MOTOR & EXHAUST,
AZRR ported motor
AZRR oil pan brace
4CNAir poly motor mounts
ACT S/S clutch kit
ACT streetlite flywheel
Goodridge S/S clutch line
Greddy TD06 Turbo
Greddy SUS ceramic coated manifold
Greddy W/G
Ceramic coated down pipe
Pettit mid pipe
HKS Drager cat back
ASP/M2 medium SMIC
Tial BOV
Fluidyne Radiator
Fighters Garage AST
Rotary Performance S/S OMP lines
FUEL/ELECTRONICS
Supra fuel pump
Innovate LC-1/XD-16 wide band
AZRR secondary rail
1600cc injectors
Aeromotive FPR
SUSPENSION/WHEELS
Tein Flex coilovers
Chrome R-1 strut bar
Blitz 03, Blitz silver 18x8-18x9
INT/EXT
Redline leather accents
Greddy V-1 Boost gauge
Innovate XD-16 wide band gauge
Shineauto/Feed side steps
Tein hood dampers
OTHER
Cerama-Chrome front cover (Cerama-chrome stuff courtesy of GoodfellasFD3S)
Cerama-Chrome LIM
Cerama-Chrome BOP's
Polished UIM
Polished T/B

02-26-2008, 08:13 PM	#1
fdeeznutz The Newbie Join Date: Feb 2008 Posts: 26 Rep Power: 0	94 Chaste white build The car, as purchased in 2002 54k miles(minus the wing, Eibachs, and Mazdaspeed MS01 wheels) It had Apex-i intakes, Trust catback, mid+down pipe, Power FC. I later added a Eibach's, Peter Farrell SMIC, Pettit power pulley, Greddy pullies, HKS BOV, 99 spec front lip, and Advan 18's. The car made 301rwhp and 298 tq at 10psi. Had the Power FC tuned by Steve Kahn. Pictures in chronological order. This was the last picture taken right before I started tearing into the motor.^^ I originally had a leak coming from the front cover on a 15k mile reman. I was only going to fix the oil leak and put new motor mounts in but things started looking bad. I pulled the turbos and they were absolutely trashed, huge cracks, oil coming from everywhere. I tossed them out and started looking around for something to replace the poor turbos. Meanwhile I sent the motor off to have them tear it down fix the leak and make sure everything looked good. Well.....I got a call a little later, it needed a rebuild. I was starting to see a chance for me to change nearly everything at once, not an easy task. I wanted a fairly reliable car once I had everything done so no huge turbos for me. I am not building my car for HP. I want it to be responsive and fun to drive. List of parts, almost everything is new. MOTOR & EXHAUST, AZRR ported motor AZRR oil pan brace 4CNAir poly motor mounts ACT S/S clutch kit ACT streetlite flywheel Goodridge S/S clutch line Greddy TD06 Turbo Greddy SUS ceramic coated manifold Greddy W/G Ceramic coated down pipe Pettit mid pipe HKS Drager cat back ASP/M2 medium SMIC Tial BOV Fluidyne Radiator Fighters Garage AST Rotary Performance S/S OMP lines FUEL/ELECTRONICS Supra fuel pump Innovate LC-1/XD-16 wide band AZRR secondary rail 1600cc injectors Aeromotive FPR SUSPENSION/WHEELS Tein Flex coilovers Chrome R-1 strut bar Blitz 03, Blitz silver 18x8-18x9 INT/EXT Redline leather accents Greddy V-1 Boost gauge Innovate XD-16 wide band gauge Shineauto/Feed side steps Tein hood dampers OTHER Cerama-Chrome front cover (Cerama-chrome stuff courtesy of GoodfellasFD3S) Cerama-Chrome LIM Cerama-Chrome BOP's Polished UIM Polished T/B Last edited by fdeeznutz; 03-26-2008 at 11:42 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode