|
Show your rotary car build up. Show off your Rotary Car build! |
|
Thread Tools | Display Modes |
11-05-2017, 09:26 AM | #1 |
I've been Wankeled!
|
My 1974 Rx-4
Should have posted this a while ago, but been too busy with the new project. I brought home this 1974 Rx-4 thanksgiving weekend. Bought it from the original owner with 27,700 miles on it. Was stored in his garage on jack stands since the early 80's. Last licence sticker was 1982. Came with a whole trailer load of parts as well as manuals, brochures, original bill of sale, and ownership from 1975. I've been working at it and with a new fuel pump and a carb rebuild it came back to life! I'll be giving it a full tune up next as well as new fluids, go over the brakes, check it all mechanically, and give it a good cleaning.
__________________
1976 Rx-4 hardtop. Half bridge 3B 13B, S5 NA rotors, Renesis e-shaft, stat gears, and bearings, balanced rotating assembly, RE dual weber 36 DCD's 203rwhp 137ft-lbs torque DGRR 2011 3rd place 1974 Rx-4 all original 27,000 miles 1988 Rx-7 TII 320rwhp. DGRR 2012 3rd place |
11-05-2017, 09:30 AM | #2 |
I've been Wankeled!
|
20170927_195647.jpg
20171009_103448_HDR.jpg 20171009_103501_HDR.jpg 20171009_105343_HDR.jpg 20170928_073529.jpg
__________________
1976 Rx-4 hardtop. Half bridge 3B 13B, S5 NA rotors, Renesis e-shaft, stat gears, and bearings, balanced rotating assembly, RE dual weber 36 DCD's 203rwhp 137ft-lbs torque DGRR 2011 3rd place 1974 Rx-4 all original 27,000 miles 1988 Rx-7 TII 320rwhp. DGRR 2012 3rd place |
11-06-2017, 02:30 PM | #4 |
I've been Wankeled!
|
Yep selling the 76 and probably the t2 as well.
__________________
1976 Rx-4 hardtop. Half bridge 3B 13B, S5 NA rotors, Renesis e-shaft, stat gears, and bearings, balanced rotating assembly, RE dual weber 36 DCD's 203rwhp 137ft-lbs torque DGRR 2011 3rd place 1974 Rx-4 all original 27,000 miles 1988 Rx-7 TII 320rwhp. DGRR 2012 3rd place |