Coil relay?

RX200013B · 11-13-2014, 02:26 PM

I have a 13b swaped into a b2000, I'm going to use 4 trailing coils for ignition.
what size relay amperage would be needed? and what size wire should I use to from the ignitor to the coil? ignitor mounted inside passenger firewall, coils mounted on top of the block. wire lenght would be approx 3' - 3.5'

C. Ludwig · 11-14-2014, 12:59 PM

30 amp relay and 20 amp fuse will be plenty.

11-13-2014, 02:26 PM	#1
RX200013B Rotary Fan in Training Join Date: Nov 2009 Location: idaho iTrader: (0) Posts: 37 Rep Power: 0	Coil relay? I have a 13b swaped into a b2000, I'm going to use 4 trailing coils for ignition. what size relay amperage would be needed? and what size wire should I use to from the ignitor to the coil? ignitor mounted inside passenger firewall, coils mounted on top of the block. wire lenght would be approx 3' - 3.5' __________________ ULTIMATE N/A

11-14-2014, 12:59 PM	#2
C. Ludwig Rotary Masochist Join Date: May 2008 Location: Floyds Knobs, IN iTrader: (5) Posts: 494 Rep Power: 17	30 amp relay and 20 amp fuse will be plenty. __________________ _______________________________________________ *One stop Haltech, AEM, Syvecs shopping. Installation and tuning.* http://www.lms-efi.com *Free support. Drop us an email.* chris@lms-efi.com 502-515-7482 Facebook @LMS-EFI

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode