Help!

drag_on · 02-19-2013, 12:47 AM

So the story is, my friend wanted to install a double din in my car, 93 rx7. We ended up taking all the panels off and pulled back the cluster, to end up finding out we didn't have to do that period. Well we pulled out the stock CD player and was about to remove the stock radio, but couldn't get out hands on the harness and didn't want to rip any wires. So we put very thing back together.. I checked the vehicle to see if everything was working properly. Everything was fine.. Did all my headlight and turn signal and hazards light. Then it took a dump on me. I cannot turn on my head light and hazard doesn't work. I can press the button to make the head light pop up and the high beam will work but not the regular light, turn signal or hazard. Please help

Rotary Evolution · 03-30-2013, 07:34 PM

check the fuses first, may have pinched a wire in the controlling circuit. although the headlight switch is on the column so... check the wiring around the steering column under the dash for any pinched wires.

02-19-2013, 12:47 AM	#1
drag_on The Newbie Join Date: Oct 2012 Location: everywhere iTrader: (0) Posts: 17 Rep Power: 0	Help! So the story is, my friend wanted to install a double din in my car, 93 rx7. We ended up taking all the panels off and pulled back the cluster, to end up finding out we didn't have to do that period. Well we pulled out the stock CD player and was about to remove the stock radio, but couldn't get out hands on the harness and didn't want to rip any wires. So we put very thing back together.. I checked the vehicle to see if everything was working properly. Everything was fine.. Did all my headlight and turn signal and hazards light. Then it took a dump on me. I cannot turn on my head light and hazard doesn't work. I can press the button to make the head light pop up and the high beam will work but not the regular light, turn signal or hazard. Please help

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-30-2013, 07:34 PM	#2
Rotary Evolution rotaryevolution.net Join Date: Feb 2011 Location: Las Vegas, NV iTrader: (0) Posts: 248 Rep Power: 14	check the fuses first, may have pinched a wire in the controlling circuit. although the headlight switch is on the column so... check the wiring around the steering column under the dash for any pinched wires.