s5 n/a question

fc nut · 06-22-2012, 08:52 AM

a friend of mine bought an s5 n/a and someone removed the emissions and the secondary port actuators. I have a set of actuators and was wondering if it's possible to set them up like the s4 n/a's? I know how the s5's are activated and I have all the parts he needs to put everything back on,but he wants to do it as cheap as possible. will it work or does he need it back to stock?

JL1RX7 · 06-22-2012, 12:16 PM

You need air to drive them. I knew guy who used a small fish tank pump to drive them. I can't remember the pressure or if it needs to be always on etc. Hope this helps.

06-22-2012, 08:52 AM	#1
fc nut member Join Date: Jun 2008 Location: Lebanon,Ohio iTrader: (0) Posts: 282 Rep Power: 17	s5 n/a question a friend of mine bought an s5 n/a and someone removed the emissions and the secondary port actuators. I have a set of actuators and was wondering if it's possible to set them up like the s4 n/a's? I know how the s5's are activated and I have all the parts he needs to put everything back on,but he wants to do it as cheap as possible. will it work or does he need it back to stock? __________________ leaving my carbon footprint....one start up at a time Last edited by fc nut; 06-25-2012 at 08:46 AM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-22-2012, 12:16 PM	#2
JL1RX7 Rotary Fanatic Join Date: Feb 2008 Location: Front Royal, VA iTrader: (1) Posts: 487 Rep Power: 17	You need air to drive them. I knew guy who used a small fish tank pump to drive them. I can't remember the pressure or if it needs to be always on etc. Hope this helps.