V-Mount help

Daedalus704 · 05-15-2012, 12:38 AM

Hello RRC,

I'm in the process of doing quite a few things to my TII and this will include a V-mount setup. The one thing I need some help with concerns the intercooler sizing. I know that there will be plenty of room there after I remove the clutch fan and remount the radiator and ac. I was wondering what size cores any of you are using on you setups. I only want to hear from you if you either have or have had/designed a v-mount setup for the Fc3s. Pictures and suggestions are welcome.

Thanks

Sharingan 19 · 05-21-2012, 02:32 PM

http://www.rotarycarclub.com/rotary_...ad.php?t=12917

Daedalus704 · 05-25-2012, 08:07 PM

Thanks Sharingan, I attempted to view a few of the threads on the other site and they are full of old broken links without pictures. This helps quite a bit.

***TitaniumTT*** · 05-26-2012, 09:14 AM

Check out either one of my build threads in the Rotary build up section

Daedalus704 · 05-27-2012, 07:07 PM

Quote:

Originally Posted by TitaniumTT

Check out either one of my build threads in the Rotary build up section

Will do, I've seen pictures here and there of your setup and the build quality is amazing sir.

Raksj04 · 10-25-2012, 09:59 AM

Quote:

Originally Posted by TitaniumTT

Check out either one of my build threads in the Rotary build up section

I read in one of your build threads you were thinking about using a 24x13 intercooler. I am not sure which one. I found this guy on ebay.

http://www.ebay.com/itm/CXRacing-FMI...#ht_4070wt_772

Is it a good to have the inlet and outlet be 90 degrees on the tanks, or is it better to have them to be on the side like a typical FMIC?

EJayCe996 · 10-25-2012, 01:01 PM

Quote:

Originally Posted by Raksj04

http://www.ebay.com/itm/CXRacing-FMI...#ht_4070wt_772

Let's just say two turbo Civics here, that I know personally, have separated the welds on those crappy intercoolers.... stay away.

05-15-2012, 12:38 AM	#1
Daedalus704 Rotary Fan in Training Join Date: Feb 2012 Location: NC iTrader: (0) Posts: 34 Rep Power: 0	V-Mount help Hello RRC, I'm in the process of doing quite a few things to my TII and this will include a V-mount setup. The one thing I need some help with concerns the intercooler sizing. I know that there will be plenty of room there after I remove the clutch fan and remount the radiator and ac. I was wondering what size cores any of you are using on you setups. I only want to hear from you if you either have or have had/designed a v-mount setup for the Fc3s. Pictures and suggestions are welcome. Thanks

05-26-2012, 09:14 AM	#4
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Check out either one of my build threads in the Rotary build up section __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-21-2012, 02:32 PM	#2
Sharingan 19 Rotary Fanatic Join Date: May 2010 iTrader: (0) Posts: 138 Rep Power: 15	http://www.rotarycarclub.com/rotary_...ad.php?t=12917

05-25-2012, 08:07 PM	#3
Daedalus704 Rotary Fan in Training Join Date: Feb 2012 Location: NC iTrader: (0) Posts: 34 Rep Power: 0	Thanks Sharingan, I attempted to view a few of the threads on the other site and they are full of old broken links without pictures. This helps quite a bit.