rx7 problems! i need help!!!!!

flavio23 · 02-22-2012, 01:04 PM

Hi guys i was wondering if any of you guys can tell me where i can find apex seals for my 13b. thanks.

Raksj04 · 02-22-2012, 01:09 PM

Mazdatrix, banazi racing, there are a lot of places. what kinda of 13b is it?

flavio23 · 02-22-2012, 01:11 PM

is a 13b N/A from an 87 fc.

Raksj04 · 02-22-2012, 01:27 PM

http://atkinsrotary.com/store/catalo...p-1-c-631.html

If your car blew a apex seal it is not as easy as just replacing one. Most of the time the broken seal does damage on the way out. It damage my rotor and took out the other 2 seals with it.

flavio23 · 02-22-2012, 04:23 PM

so what do you think i should do? get a new engine?

vrracing · 02-22-2012, 04:53 PM

Flavio,

You might watch this video on how to rebuild a rotary so you can see what's involved.

http://www.youtube.com/watch?v=ijJeU...ayer_embedded#!

The first part is doing the seals.

Then you can pull yours, take it apart and then see what, if any, parts you'll need to replace.

There are folks like Karack @ rotaryevolution.net or Kevin @ RotaryResurrection.com who can rebuild the engine for you if you feel it is beyond your ability or level of interest.

If you decide to get a JDM engine to replace yours I'd contact Japan2LA as he has an excellent reputation for used engines where most of the importers dont understand rotaries and can be less than ethical.

Good luck!

Raksj04 · 02-22-2012, 06:05 PM

If you go with Japan2la be patince, Some times he has to wait for parts to get imported. It took him a few months to send me my JDM swap. It is going to cost about the same.

flavio23 · 02-23-2012, 01:10 PM

thanks guys!! yeah im just gonna take everything apart and see what is wrong! if something im just gonna sawp it. thanks for the help.

02-22-2012, 01:04 PM	#1
flavio23 sidewayz Join Date: Feb 2012 Location: Gilbert,AZ iTrader: (0) Posts: 7 Rep Power: 0	rx7 problems! i need help!!!!! Hi guys i was wondering if any of you guys can tell me where i can find apex seals for my 13b. thanks.

02-22-2012, 04:53 PM	#6
vrracing Rotating Assembly Join Date: Oct 2008 Location: TX iTrader: (0) Posts: 102 Rep Power: 17	Flavio, You might watch this video on how to rebuild a rotary so you can see what's involved. http://www.youtube.com/watch?v=ijJeU...ayer_embedded#! The first part is doing the seals. Then you can pull yours, take it apart and then see what, if any, parts you'll need to replace. There are folks like Karack @ rotaryevolution.net or Kevin @ RotaryResurrection.com who can rebuild the engine for you if you feel it is beyond your ability or level of interest. If you decide to get a JDM engine to replace yours I'd contact Japan2LA as he has an excellent reputation for used engines where most of the importers dont understand rotaries and can be less than ethical. Good luck! __________________ 90 S5 Vert. JDM Tii with BNR Stage1 turbo. Pineapple Racing street port. Bonez cat-forward. Corksport cat-back with Vibrant UltraQuiet resonator. RTek 2 wZeitronix w/b. HKS EBC. Vis CF Tii hood. 3000GT wing. Ground Control coilover kit with KYB AGX shocks. Red and Black leather RX8 seats. Corksport Odura lip & bumper caps, OEM Tii skirts

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-22-2012, 01:09 PM	#2
Raksj04 I have Ultra power in me. Join Date: Sep 2011 iTrader: (2) Posts: 457 Rep Power: 14	Mazdatrix, banazi racing, there are a lot of places. what kinda of 13b is it?

02-22-2012, 01:11 PM	#3
flavio23 sidewayz Join Date: Feb 2012 Location: Gilbert,AZ iTrader: (0) Posts: 7 Rep Power: 0	is a 13b N/A from an 87 fc.

02-22-2012, 01:27 PM	#4
Raksj04 I have Ultra power in me. Join Date: Sep 2011 iTrader: (2) Posts: 457 Rep Power: 14	http://atkinsrotary.com/store/catalo...p-1-c-631.html If your car blew a apex seal it is not as easy as just replacing one. Most of the time the broken seal does damage on the way out. It damage my rotor and took out the other 2 seals with it.

02-22-2012, 04:23 PM	#5
flavio23 sidewayz Join Date: Feb 2012 Location: Gilbert,AZ iTrader: (0) Posts: 7 Rep Power: 0	so what do you think i should do? get a new engine?

02-22-2012, 06:05 PM	#7
Raksj04 I have Ultra power in me. Join Date: Sep 2011 iTrader: (2) Posts: 457 Rep Power: 14	If you go with Japan2la be patince, Some times he has to wait for parts to get imported. It took him a few months to send me my JDM swap. It is going to cost about the same.

02-23-2012, 01:10 PM	#8
flavio23 sidewayz Join Date: Feb 2012 Location: Gilbert,AZ iTrader: (0) Posts: 7 Rep Power: 0	thanks guys!! yeah im just gonna take everything apart and see what is wrong! if something im just gonna sawp it. thanks for the help.