How I Cheaply Fixed My Fd Driver's Door

cewrx7r1 · 11-06-2011, 01:38 PM

The early Fds tended to have a driver's door that would not close as easy as the passenger's door. It also had a non solid sound to it. That is how it was for my March 1992 R1. Even re-aligning the latch did not totally fix the problem.

A while back the door also started rattling while driving. I purchased a can of window/door insulation spray foam from Home Depot.

Checking the door interior showed that some of the glue attaching the outer skin to the vertical support had cracked and was no longer attaching the two parts together. The horizontal side impact beam is not attached to the outer skin at all.

I filled the void between the two supports and the outer skin completely with foam.

Now my left door closes perfectly and has a solid sound like the right door.

God bless spray foam.

yzf-r1 · 11-06-2011, 03:01 PM

I had a piece of the window arm mechanism actually fall off and was rattling around inside the door, I had it re-welded and installed new weather-stripping; those two changes made a big difference

Signal 2 · 11-06-2011, 05:57 PM

Used silicone caulk and some rattle-can rubberized undercoating. Caulk works on under-hood bracing too.

NW FD · 01-05-2012, 06:45 PM

Any info on how to re-align it properly?

I can see mine sag

cewrx7r1 · 01-11-2012, 04:52 PM

Quote:

Originally Posted by nw fd

any info on how to re-align it properly?

I can see mine sag

fsm

11-06-2011, 01:38 PM	#1
cewrx7r1 The Judge Join Date: Feb 2008 iTrader: (0) Posts: 196 Rep Power: 17	How I Cheaply Fixed My Fd Driver's Door The early Fds tended to have a driver's door that would not close as easy as the passenger's door. It also had a non solid sound to it. That is how it was for my March 1992 R1. Even re-aligning the latch did not totally fix the problem. A while back the door also started rattling while driving. I purchased a can of window/door insulation spray foam from Home Depot. Checking the door interior showed that some of the glue attaching the outer skin to the vertical support had cracked and was no longer attaching the two parts together. The horizontal side impact beam is not attached to the outer skin at all. I filled the void between the two supports and the outer skin completely with foam. Now my left door closes perfectly and has a solid sound like the right door. God bless spray foam.

11-06-2011, 05:57 PM	#3
Signal 2 Viable Fossil Join Date: Mar 2008 Location: Mid-West iTrader: (0) Posts: 199 Rep Power: 17	Used silicone caulk and some rattle-can rubberized undercoating. Caulk works on under-hood bracing too. __________________ Jim VR R1 FD

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-06-2011, 03:01 PM	#2
yzf-r1 Banned Join Date: Mar 2010 iTrader: (0) Posts: 67 Rep Power: 0	I had a piece of the window arm mechanism actually fall off and was rattling around inside the door, I had it re-welded and installed new weather-stripping; those two changes made a big difference

01-05-2012, 06:45 PM	#4
NW FD The Newbie Join Date: Jan 2012 iTrader: (0) Posts: 7 Rep Power: 0	Any info on how to re-align it properly? I can see mine sag