Former SRT guy, now a converted ROTORHEAD!!! YEAHHH!!

Heeley · 04-04-2008, 06:08 AM

Well after a bunch of stress over buyingi the car sight-unseen (except for pics) and having a forum member over at rx7club go look at it for me, my baby has arrived!

Here's the info:

93 Red R1
66,000 original miles
PFS intercooler
catback

there may be a few other mods, but i haven't had a chance to go over the car as it just arrived last night! I'll post pics up soon. Damn, it's dirty after the flatbed ride up from Texas!

I took it for a quick spin up the street to get some gas, and just the feeling of driving it made me feel like I was a teenager again taking my first drive in an FD. That feeling's priceless!

Matt

DRTHVDR · 04-04-2008, 07:23 AM

Morning Matt, what state/city do you live in?
and....POST PICS!

MotoTek · 04-04-2008, 08:24 PM

welcome to the world of heart ache and pain....followed by great joy. haha
you'll grow to love and hate you FD, but it's a great car for any one who loves to work on cars.

Heeley · 04-05-2008, 02:20 AM

The car made the long trip up across the border to Barrie, Ontario, Canada. Here's the first 3 pics of the car, as it's being offloaded from the flatbed.

The only thing that's got me worried is that I'm not sure if it should be smoking as bad as it is on startup right now. This is my first rotary, so i'm not sure what's normal for these cars, but cold start, it's smokes quite a bit. I haven't had any starting issues, and it seems to idle fine and run smoothly under load. Not sure if it's just exhaust coming out though, or if there's coolant in the exhaust right now... I asked the dealer that i bought it from in texas to make sure that the car was filled with antifreeze coolant, and not just water, but upon checking the fluid, it's almost all water. Not much green in it, and my coolant tester is at the bottom end of the scale, saying it's good to maybe -10C (12F) I can't smell that sweet antifreeze smell in the exhaust but that could just be because there's not much in the mix.

We had a cold spell while it was sitting in the warehouse in Buffalo awaiting the trip across the border, and it's been a little chilly here, so i'm worried there might have been damage. Then again, maybe i've just got an overactive imagination. I always fear the worst. People are stupid. Grr..

Heeley · 04-05-2008, 02:27 AM

The other bit of drama... typical bureaucratic bullshit... I need a temporary permit to get the safety done, because the dealer didn't send the temp plate.... but the MTO won't give me a temp permit without a safety inspection... which i need the permit to go and get. wtf.

3tegStrong · 04-05-2008, 07:10 AM

hey there-
nice ride man!
hope you get it straightened out(paperwork b.s!!)
i see you 'got peter'!

04-04-2008, 06:08 AM	#1
Heeley Rotary Fan in Training Join Date: Mar 2008 Location: Snowbelt, Ontario! iTrader: (0) Posts: 57 Rep Power: 17	Former SRT guy, now a converted ROTORHEAD!!! YEAHHH!! Well after a bunch of stress over buyingi the car sight-unseen (except for pics) and having a forum member over at rx7club go look at it for me, my baby has arrived! Here's the info: 93 Red R1 66,000 original miles PFS intercooler catback there may be a few other mods, but i haven't had a chance to go over the car as it just arrived last night! I'll post pics up soon. Damn, it's dirty after the flatbed ride up from Texas! I took it for a quick spin up the street to get some gas, and just the feeling of driving it made me feel like I was a teenager again taking my first drive in an FD. That feeling's priceless! Matt Last edited by Heeley; 04-04-2008 at 06:11 AM..

04-04-2008, 07:23 AM	#2
DRTHVDR Rotary Fanatic Join Date: Feb 2008 iTrader: (3) Posts: 126 Rep Power: 17	Morning Matt, what state/city do you live in? and....POST PICS! __________________ You don't need a better ride, your ride needs a better driver. 93 RX-7 R1 CYM: Swap in progress Other: 00 Impreza RS (GC8) & Odyssey Touring (Mommy Missile)

04-04-2008, 08:24 PM	#3
MotoTek Always Under Construction Join Date: Mar 2008 Location: La Playa, CA iTrader: (1) Posts: 302 Rep Power: 17	welcome to the world of heart ache and pain....followed by great joy. haha you'll grow to love and hate you FD, but it's a great car for any one who loves to work on cars. __________________ BLACKADDE™ \| ADGT RX7 \|

04-05-2008, 02:20 AM	#4
Heeley Rotary Fan in Training Join Date: Mar 2008 Location: Snowbelt, Ontario! iTrader: (0) Posts: 57 Rep Power: 17	The car made the long trip up across the border to Barrie, Ontario, Canada. Here's the first 3 pics of the car, as it's being offloaded from the flatbed. The only thing that's got me worried is that I'm not sure if it should be smoking as bad as it is on startup right now. This is my first rotary, so i'm not sure what's normal for these cars, but cold start, it's smokes quite a bit. I haven't had any starting issues, and it seems to idle fine and run smoothly under load. Not sure if it's just exhaust coming out though, or if there's coolant in the exhaust right now... I asked the dealer that i bought it from in texas to make sure that the car was filled with antifreeze coolant, and not just water, but upon checking the fluid, it's almost all water. Not much green in it, and my coolant tester is at the bottom end of the scale, saying it's good to maybe -10C (12F) I can't smell that sweet antifreeze smell in the exhaust but that could just be because there's not much in the mix. We had a cold spell while it was sitting in the warehouse in Buffalo awaiting the trip across the border, and it's been a little chilly here, so i'm worried there might have been damage. Then again, maybe i've just got an overactive imagination. I always fear the worst. People are stupid. Grr.. Last edited by Heeley; 04-05-2008 at 02:24 AM..

04-05-2008, 07:10 AM	#6
3tegStrong XRANNIE Join Date: Mar 2008 Location: santa fe, tn iTrader: (1) Posts: 119 Rep Power: 17	hey there- nice ride man! hope you get it straightened out(paperwork b.s!!) i see you 'got peter'! __________________ got peter? GO NAVY..Thanks to All who've served!!!! http://www.theautolog.com/3tegstrong-1

04-05-2008, 02:27 AM	#5
Heeley Rotary Fan in Training Join Date: Mar 2008 Location: Snowbelt, Ontario! iTrader: (0) Posts: 57 Rep Power: 17	The other bit of drama... typical bureaucratic bullshit... I need a temporary permit to get the safety done, because the dealer didn't send the temp plate.... but the MTO won't give me a temp permit without a safety inspection... which i need the permit to go and get. wtf.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode