any experience with godspeed intercooler?

tyler · 07-24-2011, 09:31 PM

I have a chance to get one of theses for around 200$, its not the kit for the rx but I can get the fmic and 2x the piping. My question is rather or not I should take it. Here's the link to the exact one. http://www.godspeedproject.com/store...oducts_id=1440

RETed · 07-25-2011, 07:34 AM

So you're saying you can get an intercooler for an RSX for $200?

Did you know you can get those 24" x 12" x 3" intercoolers for $100 brand new off eBay?

-Ted

***TitaniumTT*** · 07-25-2011, 07:44 AM

This is true, but, most of the AL that I've bought off ebizzle has been really shitty alloy, not tough to weld, just cheap and dirty. Also, most of the cheap intercoolers that I've seen from ebay don't have turbulators and aren't as effeicient as a decent name brand intercooler. Plus the pressure drop across. The core was ridiculous.

I recall a heated debate over this on the evil forum in the 3rd gen section. Someone actually got all the equipment to properly test the cores and found out just those facts. I believe the godspeed intercoolers were cheap for a reason

Force13b · 07-25-2011, 10:59 AM

Quote:

Originally Posted by TitaniumTT

This is true, but, most of the AL that I've bought off ebizzle has been really shitty alloy, not tough to weld, just cheap and dirty. Also, most of the cheap intercoolers that I've seen from ebay don't have turbulators and aren't as effeicient as a decent name brand intercooler. Plus the pressure drop across. The core was ridiculous.

I recall a heated debate over this on the evil forum in the 3rd gen section. Someone actually got all the equipment to properly test the cores and found out just those facts. I believe the godspeed intercoolers were cheap for a reason

There is also a reason you can buy a Godspeed GT35R for 400$ new. Not something i'd want on my car.

tyler · 07-25-2011, 11:16 AM

Got it thanks guys my friend had. Decided not to turbo his car so I got first call on any thing I wanted.

classicauto · 07-26-2011, 03:08 PM

FWIW though, I've been running over 400whp through a godspeed intercooler for quite a while. (over 2 years, plenty of road miles - lost count)

I'm sure a better more effcient core would maximize my cooling, probably gain a bit of power - or on the other side, a smaller more effcient core cuold gain response - but has it worked? Oh yes. Was it cheap - you bet.

730RWHP12A · 07-26-2011, 03:41 PM

godspeed is china junk. as long as you know its not going to fit well and its not going to perform the best then get it. it is real cheap so if you a baller on a budget then its all good

tyler · 07-26-2011, 04:21 PM

I'm. Going to help him do new injectors a fuel pump and a battery relocation and he said he might just give it to me for helping, so I might as well try it

07-24-2011, 09:31 PM	#1
tyler Rotary Fan in Training Join Date: Jun 2011 iTrader: (0) Posts: 64 Rep Power: 14	any experience with godspeed intercooler? I have a chance to get one of theses for around 200$, its not the kit for the rx but I can get the fmic and 2x the piping. My question is rather or not I should take it. Here's the link to the exact one. http://www.godspeedproject.com/store...oducts_id=1440

07-25-2011, 07:44 AM	#3
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	This is true, but, most of the AL that I've bought off ebizzle has been really shitty alloy, not tough to weld, just cheap and dirty. Also, most of the cheap intercoolers that I've seen from ebay don't have turbulators and aren't as effeicient as a decent name brand intercooler. Plus the pressure drop across. The core was ridiculous. I recall a heated debate over this on the evil forum in the 3rd gen section. Someone actually got all the equipment to properly test the cores and found out just those facts. I believe the godspeed intercoolers were cheap for a reason __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

07-26-2011, 03:41 PM	#7
730RWHP12A Rotary Fanatic Join Date: Mar 2008 Location: chatsworth, california iTrader: (8) Posts: 349 Rep Power: 17	godspeed is china junk. as long as you know its not going to fit well and its not going to perform the best then get it. it is real cheap so if you a baller on a budget then its all good __________________ rotaryshack.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-25-2011, 11:16 AM	#5
tyler Rotary Fan in Training Join Date: Jun 2011 iTrader: (0) Posts: 64 Rep Power: 14	Got it thanks guys my friend had. Decided not to turbo his car so I got first call on any thing I wanted.

07-26-2011, 04:21 PM	#8
tyler Rotary Fan in Training Join Date: Jun 2011 iTrader: (0) Posts: 64 Rep Power: 14	I'm. Going to help him do new injectors a fuel pump and a battery relocation and he said he might just give it to me for helping, so I might as well try it