Loud ass hissing noise

tweiss3 · 06-27-2011, 07:53 PM

91 Naturally Aspirated

Drove and sounded fine on the way to work this morning and at lunch. On the way home however, I hear a loud ass hissing noise (can't figure where, tried for about an hour). I also have no power. It still feels smooth, just no fucking power.

I have the factory emissions in place. Any ideas?

Dzire · 06-27-2011, 08:25 PM

might be a bad vacuum leak somewhere

tweiss3 · 06-27-2011, 08:38 PM

where would i look for the vac leak? It does sound like one, but idles fine.

Pete_89T2 · 06-27-2011, 08:51 PM

A vacuum leak big enough to be heard would result in a crappy idle. Where in the band is the car lacking in power - top end or everywhere? Did the S5 NAs use pressure from the air pump to operate aux ports/VDI; maybe the hiss is from an air pump plumbing leak?

tweiss3 · 06-27-2011, 08:56 PM

It may be airpump. I do believe it was used for aux port operation. I'll see if i can figure out where it could come from and check it tomorrow

tyler · 06-27-2011, 08:59 PM

Can it be heard while reving in neutral?

tweiss3 · 06-28-2011, 05:30 AM

yes

tyler · 06-28-2011, 07:44 PM

Is this noise heard at all times or under load?

tweiss3 · 06-28-2011, 08:14 PM

yes, its there all the time

tweiss3 · 07-01-2011, 05:39 PM

It appears to be coming from the header to downpipe connection? Could my cat have melted and blocked cause it feels like anything above 3k is where the lag is. I may try to pull it tomorrow morning and see if it looks free and clear.

I tested all the variable intake valves and went over all pressure and vacuum hoses, and they all worked and were in good condition.

NoDOHC · 07-01-2011, 10:04 PM

Melted cat is a good possibility, the best theory I have heard so far.

tweiss3 · 07-02-2011, 03:55 PM

It was the cat, i got pictures to post later. I gutted it and put it back in, im up and running again like ot should be

tweiss3 · 07-05-2011, 06:37 PM

pulled the cat and saw it wasn't being a good girl

so i punished it

tyler · 07-05-2011, 09:37 PM

Haha nice...I almost gutted my cat but I don't wana buy another for echeck

NoDOHC · 07-05-2011, 11:21 PM

Yeah, I have seen the plugged cat before (several times) unfortunately, I had to replace it (emissions). I think that the guts may have fallen out lately though, as I noticed the car being a little louder. If I don't look, then I don't know....

Glad you found the issue!

06-27-2011, 07:53 PM	#1
tweiss3 Mazda Lover Join Date: Aug 2010 Location: Akron, Ohio iTrader: (0) Posts: 319 Rep Power: 15	Loud ass hissing noise 91 Naturally Aspirated Drove and sounded fine on the way to work this morning and at lunch. On the way home however, I hear a loud ass hissing noise (can't figure where, tried for about an hour). I also have no power. It still feels smooth, just no fucking power. I have the factory emissions in place. Any ideas? __________________ 2004 Mazda6 V6 5-spd - still waiting on money for a motor 1991 Mazda RX7 NA 5-spd - my new DD with 145,000 miles

06-27-2011, 08:25 PM	#2
Dzire Rotary Fanatic Join Date: Apr 2008 Location: B,ham AL/Hollywood FL iTrader: (0) Posts: 151 Rep Power: 17	might be a bad vacuum leak somewhere __________________ RX8 2004 GT RX7 1988 TII

06-27-2011, 08:38 PM	#3
tweiss3 Mazda Lover Join Date: Aug 2010 Location: Akron, Ohio iTrader: (0) Posts: 319 Rep Power: 15	where would i look for the vac leak? It does sound like one, but idles fine. __________________ 2004 Mazda6 V6 5-spd - still waiting on money for a motor 1991 Mazda RX7 NA 5-spd - my new DD with 145,000 miles

06-27-2011, 08:56 PM	#5
tweiss3 Mazda Lover Join Date: Aug 2010 Location: Akron, Ohio iTrader: (0) Posts: 319 Rep Power: 15	It may be airpump. I do believe it was used for aux port operation. I'll see if i can figure out where it could come from and check it tomorrow __________________ 2004 Mazda6 V6 5-spd - still waiting on money for a motor 1991 Mazda RX7 NA 5-spd - my new DD with 145,000 miles

06-28-2011, 05:30 AM	#7
tweiss3 Mazda Lover Join Date: Aug 2010 Location: Akron, Ohio iTrader: (0) Posts: 319 Rep Power: 15	yes __________________ 2004 Mazda6 V6 5-spd - still waiting on money for a motor 1991 Mazda RX7 NA 5-spd - my new DD with 145,000 miles

06-27-2011, 08:51 PM	#4
Pete_89T2 Lifetime Rotorhead Join Date: Apr 2010 Location: Elkton, MD iTrader: (1) Posts: 874 Rep Power: 15	A vacuum leak big enough to be heard would result in a crappy idle. Where in the band is the car lacking in power - top end or everywhere? Did the S5 NAs use pressure from the air pump to operate aux ports/VDI; maybe the hiss is from an air pump plumbing leak?

06-27-2011, 08:59 PM	#6
tyler Rotary Fan in Training Join Date: Jun 2011 iTrader: (0) Posts: 64 Rep Power: 14	Can it be heard while reving in neutral?

06-28-2011, 07:44 PM	#8
tyler Rotary Fan in Training Join Date: Jun 2011 iTrader: (0) Posts: 64 Rep Power: 14	Is this noise heard at all times or under load?

06-28-2011, 08:14 PM	#9
tweiss3 Mazda Lover Join Date: Aug 2010 Location: Akron, Ohio iTrader: (0) Posts: 319 Rep Power: 15	yes, its there all the time __________________ 2004 Mazda6 V6 5-spd - still waiting on money for a motor 1991 Mazda RX7 NA 5-spd - my new DD with 145,000 miles

07-01-2011, 05:39 PM	#10
tweiss3 Mazda Lover Join Date: Aug 2010 Location: Akron, Ohio iTrader: (0) Posts: 319 Rep Power: 15	It appears to be coming from the header to downpipe connection? Could my cat have melted and blocked cause it feels like anything above 3k is where the lag is. I may try to pull it tomorrow morning and see if it looks free and clear. I tested all the variable intake valves and went over all pressure and vacuum hoses, and they all worked and were in good condition. __________________ 2004 Mazda6 V6 5-spd - still waiting on money for a motor 1991 Mazda RX7 NA 5-spd - my new DD with 145,000 miles

07-01-2011, 10:04 PM	#11
NoDOHC The quest for more torque Join Date: Sep 2008 Location: Sheboygan, Wisconsin iTrader: (1) Posts: 855 Rep Power: 17	Melted cat is a good possibility, the best theory I have heard so far. __________________ 1986 GXL ('87 4-port NA - Haltech E8, LS2 Coils. Defined Autoworks Headers, Dual 2.5" Exhaust (Dual Superflow, dBX mufflers) 1991 Coupe (KYB AGX Shocks, Eibach lowering springs, RB exhaust, Stock and Automatic)

07-02-2011, 03:55 PM	#12
tweiss3 Mazda Lover Join Date: Aug 2010 Location: Akron, Ohio iTrader: (0) Posts: 319 Rep Power: 15	It was the cat, i got pictures to post later. I gutted it and put it back in, im up and running again like ot should be __________________ 2004 Mazda6 V6 5-spd - still waiting on money for a motor 1991 Mazda RX7 NA 5-spd - my new DD with 145,000 miles

07-05-2011, 06:37 PM	#13
tweiss3 Mazda Lover Join Date: Aug 2010 Location: Akron, Ohio iTrader: (0) Posts: 319 Rep Power: 15	pulled the cat and saw it wasn't being a good girl so i punished it __________________ 2004 Mazda6 V6 5-spd - still waiting on money for a motor 1991 Mazda RX7 NA 5-spd - my new DD with 145,000 miles

07-05-2011, 09:37 PM	#14
tyler Rotary Fan in Training Join Date: Jun 2011 iTrader: (0) Posts: 64 Rep Power: 14	Haha nice...I almost gutted my cat but I don't wana buy another for echeck

07-05-2011, 11:21 PM	#15
NoDOHC The quest for more torque Join Date: Sep 2008 Location: Sheboygan, Wisconsin iTrader: (1) Posts: 855 Rep Power: 17	Yeah, I have seen the plugged cat before (several times) unfortunately, I had to replace it (emissions). I think that the guts may have fallen out lately though, as I noticed the car being a little louder. If I don't look, then I don't know.... Glad you found the issue! __________________ 1986 GXL ('87 4-port NA - Haltech E8, LS2 Coils. Defined Autoworks Headers, Dual 2.5" Exhaust (Dual Superflow, dBX mufflers) 1991 Coupe (KYB AGX Shocks, Eibach lowering springs, RB exhaust, Stock and Automatic)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode