hey from bc

widebodyse7en · 06-09-2011, 11:50 PM

hey there everyone! im matt.
ive had my fd now for 4 years and heres shes almost finished. im currently in the midst of rebuilding my 13brew i have ported the rotor housings with pineapple racings ep3a templates and i now am working on the irons.
there are some pics of my fd on my page check it out!

thanks for taking the time to say hello and for checking it out and leaving comments

also! MAD PROPS to GOOPY PERFORMANCE!!

RotorDad · 06-10-2011, 12:19 AM

Welcome to the forum from another widebody 7 owner.

widebodyse7en · 06-10-2011, 12:55 AM

thanks rotordad!

my single turbo im using on my fd is a greddy t8833d and my hp goal is 550

widebodyse7en · 06-10-2011, 05:34 PM

im thinking of opening a rotary shop vancouver island since there are far too few rotary shops that will work on/build peoples motors :P although im new to the forum i have built a few engines and i am currently working on a larger streetported 13brew that will spin at 550 ps. :P im using goopy apex seals too

ill get compression numbers up as soon as its together

PantyRaid · 06-30-2011, 10:06 PM

you should .. i live in bellingham WA ...and there are no rotary shops anywhere around here i think the nearest one is in Tacoma WA

06-09-2011, 11:50 PM	#1
widebodyse7en corvette eater Join Date: Jun 2011 Location: british coulmbia canada iTrader: (0) Posts: 16 Rep Power: 0	hey from bc hey there everyone! im matt. ive had my fd now for 4 years and heres shes almost finished. im currently in the midst of rebuilding my 13brew i have ported the rotor housings with pineapple racings ep3a templates and i now am working on the irons. there are some pics of my fd on my page check it out! thanks for taking the time to say hello and for checking it out and leaving comments also! MAD PROPS to GOOPY PERFORMANCE!!

06-10-2011, 12:19 AM	#2
RotorDad Big Ugly Join Date: Apr 2009 Location: Fredericksburg, Va iTrader: (1) Posts: 591 Rep Power: 16	Welcome to the forum from another widebody 7 owner. __________________ *Boosted Big Body On 335's* PS3 ID: Rotordad 1986 Mazda RX7 GXL - Street ported 13BT, Haltech, 62mm, ect. 2006 MazdaSpeed 6 - Eagle, Wiseco, Cobb, ect.

06-10-2011, 05:34 PM	#4
widebodyse7en corvette eater Join Date: Jun 2011 Location: british coulmbia canada iTrader: (0) Posts: 16 Rep Power: 0	im thinking of opening a rotary shop vancouver island since there are far too few rotary shops that will work on/build peoples motors :P although im new to the forum i have built a few engines and i am currently working on a larger streetported 13brew that will spin at 550 ps. :P im using goopy apex seals too ill get compression numbers up as soon as its together __________________ WideBodySe7en NOW ACCEPTING REBUILDS!! pm me for pricing

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-10-2011, 12:55 AM	#3
widebodyse7en corvette eater Join Date: Jun 2011 Location: british coulmbia canada iTrader: (0) Posts: 16 Rep Power: 0	thanks rotordad! my single turbo im using on my fd is a greddy t8833d and my hp goal is 550

06-30-2011, 10:06 PM	#5
PantyRaid The Newbie Join Date: Jun 2011 Location: Bellingham WA iTrader: (0) Posts: 3 Rep Power: 0	you should .. i live in bellingham WA ...and there are no rotary shops anywhere around here i think the nearest one is in Tacoma WA