20b race/high performance header

GtoRx7 · 12-23-2010, 02:18 AM

Here is another incredible piece from Defined Autoworks- Full race stainless header made to fit the famous 20b "3-rotor" engine when installed into the Rx-7 Chassis. Will fit both the FC and FD chassis (1986-2002 mazda Rx-7) Works with RHD as well!

What you are getting-

-Highest grade 321 stainless construction. Look up 321 stainless, it is FAR stronger and heat resistant than 304 grade. Its also MUCH more expensive.

-Fully TIG welded for superior finish, fit, and durability. Each header is hand fitted and welded. TIG takes HOURS to do, but is better than anything else on the market

-Dyno Proven and race tested design. This is not just a random bunch of tubes twisted together to look nice. This is a race PROVEN design after YEARS of research and development. Each runner is equal length down to a 1/4". The Collector has been carefully sized and made to provide tremendous power over anything else.

-Will provide more power on stock and highly modified non-turbo 20b's

Price is $2,150.00

***Herblenny*** · 12-23-2010, 07:47 AM

Simply beautiful work!

1twistedrx7 · 12-23-2010, 08:16 AM

wow! great craftsmanship to bad my 20b is not na

GtoRx7 · 12-24-2010, 04:14 PM

Quote:

Originally Posted by 1twistedrx7

wow! great craftsmanship to bad my 20b is not na

Thanks! We build turbo manifolds too

12-23-2010, 02:18 AM	#1
GtoRx7 Rotary Fanatic Join Date: Jul 2008 iTrader: (0) Posts: 151 Rep Power: 17	20b race/high performance header Here is another incredible piece from Defined Autoworks- Full race stainless header made to fit the famous 20b "3-rotor" engine when installed into the Rx-7 Chassis. Will fit both the FC and FD chassis (1986-2002 mazda Rx-7) Works with RHD as well! What you are getting- -Highest grade 321 stainless construction. Look up 321 stainless, it is FAR stronger and heat resistant than 304 grade. Its also MUCH more expensive. -Fully TIG welded for superior finish, fit, and durability. Each header is hand fitted and welded. TIG takes HOURS to do, but is better than anything else on the market -Dyno Proven and race tested design. This is not just a random bunch of tubes twisted together to look nice. This is a race PROVEN design after YEARS of research and development. Each runner is equal length down to a 1/4". The Collector has been carefully sized and made to provide tremendous power over anything else. -Will provide more power on stock and highly modified non-turbo 20b's Price is $2,150.00 __________________ DEFINED AUTOWORKS Where concept meets results Black 1994 FD 4-rotor 610rwhp all motor Red 1970 Mazda R-100 with 10a Black 1974 Mazda Rx4 Black 1984 Gsl-SE 13b-re streetport 230rwhp

12-23-2010, 07:47 AM	#2
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 iTrader: (11) Posts: 644 Rep Power: 10	Simply beautiful work! __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

12-23-2010, 08:16 AM	#3
1twistedrx7 Rotary Fanatic Join Date: Feb 2008 iTrader: (11) Posts: 411 Rep Power: 0	wow! great craftsmanship to bad my 20b is not na __________________ Rotary Performance Motors(DGRRXI)sponsor 2011 RPM sale complete rebuilt your choice ported or bridge port short block W/RA seals 2300 no core required plus shipping. we now offer powder coating! 93 mb touring patring out sold! 93 vr touring sold 93vr died violently 93 ssm touring sold 93 black 20b project and a lot of money! underestimated !! http://rotorfest.lefora.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode