redrilling hubs

Hitman Cody2130 · 12-16-2010, 11:00 AM

I have been trying to find some 4x110 wheels

and am tired of looking. I was thinking about taking my hubs, disks, and drums in to a local cnc machine shop that does very precise work and haveing them redrill everything for 4x100. This wouldnt be a permanate solution but would let me have some nice wheels till I get my 8.8" rear end and bolt patteren swap ready. Lets hear some opinions!

RotorDad · 12-16-2010, 12:50 PM

Why not just buy a set of 4x100 to 4x114.3 or 4x100 to 5x114.3 wheel adapters. I have seen them on ebay & a few other sites.

http://billetwheeladapters.com/wheel...html?limit=all

Rogue_Wulff · 12-16-2010, 01:28 PM

Heck, discount tire direct has 15 x 7 wheels with the 4 x 110 bolt pattern for around $350-400/set shipped. Usually have them in stock, too.... Just need to get some screw in studs, as the stock (junk) lugs won't work with these wheels.
Granted, they only have one style and color available, but they fit well and look nice. I have a set in storage for backup, in case I decide to take off my other 15's......

http://www.discounttiredirect.com/di...rw=&vid=000555

Hitman Cody2130 · 12-16-2010, 01:30 PM

Due to the fact that for some odd and unknown reason I am dying to run Sportmax 002's in 16x8 0 offset on my car and with 1" wheel spacers there is no way to stuff those wheels under my car even with the ZG flares that I am ordering.

RotorDad · 12-16-2010, 06:23 PM

I think Enkei is re-introducing the Enkei 92's or you could get a set of old ones if you like meshies.

Hitman Cody2130 · 12-16-2010, 06:41 PM

They did bring back the 92 but they are only in 15x7 and 4x100 patterens

and I want some very aggersive fitment wheels.

RotorDad · 12-17-2010, 12:40 AM

Sportmax 002's 16"x8" 0 offset 4x100 & 4x114.3 like these.

Garfinkles Motor Works · 12-17-2010, 03:47 AM

I plan on redrilling the hubs on my first gen with a 3rd gen motor unless I sell it before I get that far with it .I would redrill before using adapters .

Hitman Cody2130 · 12-17-2010, 06:34 AM

Quote:

Originally Posted by RotorDad

Sportmax 002's 16"x8" 0 offset 4x100 & 4x114.3 like these.

yeah but in 15x8's

RotorDad · 12-17-2010, 12:00 PM

Above you said 16x8 0 offset, 15x8 should be easier to find.

Hitman Cody2130 · 12-17-2010, 12:18 PM

Quote:

Originally Posted by RotorDad

Above you said 16x8 0 offset, 15x8 should be easier to find.

I meant to say 15x8, but both are a stock size that alot of places either have or can get, I was thinking about 16's but 15's will end up giving the car a more period correct look and its a little cheaper to 15's.

RotorDad · 12-17-2010, 01:21 PM

Quote:

Originally Posted by Hitman Cody2130

I meant to say 15x8, but both are a stock size that alot of places either have or can get, I was thinking about 16's but 15's will end up giving the car a more period correct look and its a little cheaper to 15's.

Yeah I agree the 15's would give a good look to the car.

730RWHP12A · 12-17-2010, 03:30 PM

unfortunately if you want aggressive offset you need to spend big money on some custom fitment applications wheel companies that offer a wide variety of offsets.

Hitman Cody2130 · 12-17-2010, 07:45 PM

Honestly 15x8 0 offset is as aggesive as I would want to go.

RX-7 Chris · 12-20-2010, 05:13 PM

You could just go with the ReSpeed 5 lug conversion.

12-16-2010, 11:00 AM	#1
Hitman Cody2130 FB junkie Join Date: Dec 2010 Location: Washington state Posts: 28 Rep Power: 0	redrilling hubs I have been trying to find some 4x110 wheels and am tired of looking. I was thinking about taking my hubs, disks, and drums in to a local cnc machine shop that does very precise work and haveing them redrill everything for 4x100. This wouldnt be a permanate solution but would let me have some nice wheels till I get my 8.8" rear end and bolt patteren swap ready. Lets hear some opinions!

12-16-2010, 12:50 PM	#2
RotorDad Big Ugly Join Date: Apr 2009 Location: Fredericksburg, Va Posts: 591 Rep Power: 17	Why not just buy a set of 4x100 to 4x114.3 or 4x100 to 5x114.3 wheel adapters. I have seen them on ebay & a few other sites. http://billetwheeladapters.com/wheel...html?limit=all __________________ *Boosted Big Body On 335's* PS3 ID: Rotordad 1986 Mazda RX7 GXL - Street ported 13BT, Haltech, 62mm, ect. 2006 MazdaSpeed 6 - Eagle, Wiseco, Cobb, ect.

12-16-2010, 06:23 PM	#5
RotorDad Big Ugly Join Date: Apr 2009 Location: Fredericksburg, Va Posts: 591 Rep Power: 17	I think Enkei is re-introducing the Enkei 92's or you could get a set of old ones if you like meshies. __________________ *Boosted Big Body On 335's* PS3 ID: Rotordad 1986 Mazda RX7 GXL - Street ported 13BT, Haltech, 62mm, ect. 2006 MazdaSpeed 6 - Eagle, Wiseco, Cobb, ect.

12-17-2010, 12:40 AM	#7
RotorDad Big Ugly Join Date: Apr 2009 Location: Fredericksburg, Va Posts: 591 Rep Power: 17	Sportmax 002's 16"x8" 0 offset 4x100 & 4x114.3 like these. __________________ *Boosted Big Body On 335's* PS3 ID: Rotordad 1986 Mazda RX7 GXL - Street ported 13BT, Haltech, 62mm, ect. 2006 MazdaSpeed 6 - Eagle, Wiseco, Cobb, ect.

12-17-2010, 12:00 PM	#10
RotorDad Big Ugly Join Date: Apr 2009 Location: Fredericksburg, Va Posts: 591 Rep Power: 17	Above you said 16x8 0 offset, 15x8 should be easier to find. __________________ *Boosted Big Body On 335's* PS3 ID: Rotordad 1986 Mazda RX7 GXL - Street ported 13BT, Haltech, 62mm, ect. 2006 MazdaSpeed 6 - Eagle, Wiseco, Cobb, ect.

12-16-2010, 01:28 PM	#3
Rogue_Wulff Non Member Join Date: Jun 2008 Posts: 310 Rep Power: 18	Heck, discount tire direct has 15 x 7 wheels with the 4 x 110 bolt pattern for around $350-400/set shipped. Usually have them in stock, too.... Just need to get some screw in studs, as the stock (junk) lugs won't work with these wheels. Granted, they only have one style and color available, but they fit well and look nice. I have a set in storage for backup, in case I decide to take off my other 15's...... http://www.discounttiredirect.com/di...rw=&vid=000555

12-16-2010, 01:30 PM	#4
Hitman Cody2130 FB junkie Join Date: Dec 2010 Location: Washington state Posts: 28 Rep Power: 0	Due to the fact that for some odd and unknown reason I am dying to run Sportmax 002's in 16x8 0 offset on my car and with 1" wheel spacers there is no way to stuff those wheels under my car even with the ZG flares that I am ordering.

12-16-2010, 06:41 PM	#6
Hitman Cody2130 FB junkie Join Date: Dec 2010 Location: Washington state Posts: 28 Rep Power: 0	They did bring back the 92 but they are only in 15x7 and 4x100 patterens and I want some very aggersive fitment wheels.

12-17-2010, 03:47 AM	#8
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	I plan on redrilling the hubs on my first gen with a 3rd gen motor unless I sell it before I get that far with it .I would redrill before using adapters .

12-17-2010, 03:30 PM	#13
730RWHP12A Rotary Fanatic Join Date: Mar 2008 Location: chatsworth, california Posts: 349 Rep Power: 18	unfortunately if you want aggressive offset you need to spend big money on some custom fitment applications wheel companies that offer a wide variety of offsets. __________________ rotaryshack.com

12-17-2010, 07:45 PM	#14
Hitman Cody2130 FB junkie Join Date: Dec 2010 Location: Washington state Posts: 28 Rep Power: 0	Honestly 15x8 0 offset is as aggesive as I would want to go. __________________ Overkill is under-rated

12-20-2010, 05:13 PM	#15
RX-7 Chris Rotary Fanatic Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 132 Rep Power: 18	You could just go with the ReSpeed 5 lug conversion. __________________ http://coloradomazdaclub.com 1984 RX-7 GSL-SE 1983 RX-7 GSL PARTING OUT + EXTRA 1964 Ford Galaxie 500XL 390 auto 1970 Ford F250 4x2 390 4bl C6

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode