hey

sleeper · 10-03-2010, 12:30 PM

hello im new to the site. just so you know i am not an owner of a Mazda. i own a 1991 chevy cavalier i plan to make it a sleeper with a rotary motor. i plan to put a 4 rotar 13b motor in it but i joined this site because i don't know much about rotary motors and i thought this might give me some insight. please let me know if you have any other ideas or if there is any problems about this motor i need to know.

RotorDad · 10-03-2010, 01:46 PM

Well welcome to the site. As far as dropping a rotary into the 91 Cav have fun with that. I could think of many better cars to do the transplant & a couple of non rotary choices for your Cav. A 4 rotor is not a 13b, but a 26b, the cost of that motor & the amount of fabrication I think would not be in your best interest for that car. If you are set on a doing a rotary swap into your Cav a 13bt should be more than enough. I'm not sure if you were trying to stay FWD or you were going to RWD the Cav. First thing know your budget & do a little research on cost of such a build to see if it fits your budget. What are your mechanical abilities, is this something going straight to a shop or is this just a pipe dream? IMO buy an RX7 build it be happy & use the Cav for a daily. On the other hand there's a few Cavs at the track fitted with small blocks, you could always go that route.

djmtsu · 10-04-2010, 11:43 AM

Troll

Silver86 · 10-04-2010, 01:12 PM

Quote:

Originally Posted by djmtsu

Troll

.

9krpmrx8 · 10-04-2010, 03:50 PM

Geesh.

10-03-2010, 12:30 PM	#1
sleeper The Newbie Join Date: Oct 2010 Location: olathe iTrader: (0) Posts: 2 Rep Power: 0	hey hello im new to the site. just so you know i am not an owner of a Mazda. i own a 1991 chevy cavalier i plan to make it a sleeper with a rotary motor. i plan to put a 4 rotar 13b motor in it but i joined this site because i don't know much about rotary motors and i thought this might give me some insight. please let me know if you have any other ideas or if there is any problems about this motor i need to know. __________________

10-03-2010, 01:46 PM	#2
RotorDad Big Ugly Join Date: Apr 2009 Location: Fredericksburg, Va iTrader: (1) Posts: 591 Rep Power: 16	Well welcome to the site. As far as dropping a rotary into the 91 Cav have fun with that. I could think of many better cars to do the transplant & a couple of non rotary choices for your Cav. A 4 rotor is not a 13b, but a 26b, the cost of that motor & the amount of fabrication I think would not be in your best interest for that car. If you are set on a doing a rotary swap into your Cav a 13bt should be more than enough. I'm not sure if you were trying to stay FWD or you were going to RWD the Cav. First thing know your budget & do a little research on cost of such a build to see if it fits your budget. What are your mechanical abilities, is this something going straight to a shop or is this just a pipe dream? IMO buy an RX7 build it be happy & use the Cav for a daily. On the other hand there's a few Cavs at the track fitted with small blocks, you could always go that route. __________________ *Boosted Big Body On 335's* PS3 ID: Rotordad 1986 Mazda RX7 GXL - Street ported 13BT, Haltech, 62mm, ect. 2006 MazdaSpeed 6 - Eagle, Wiseco, Cobb, ect. Last edited by RotorDad; 10-03-2010 at 02:03 PM..

10-04-2010, 11:43 AM	#3
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (10) Posts: 4,043 Rep Power: 21	Troll __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

10-04-2010, 03:50 PM	#5
9krpmrx8 SARX + Boosted = Win Join Date: Sep 2010 Location: San Antonio, Texas iTrader: (0) Posts: 70 Rep Power: 15	Geesh. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode