Rebuildable Cores

HDP · 02-24-2008, 09:59 AM

Just wondering if 99 spec turbos can be used as stage III core.

Bryan@BNR · 02-29-2008, 12:21 PM

yes they are good for cores for a stage 3 build up. I will not use the abradable comrpessor housings for the stage 3's. The nylon insert doesn't have enough meat to fit the larger compressor wheel, plus the nylon insert unreliable anyways. Take it easy.

Bryan@BNR

80 CID · 02-29-2008, 10:47 PM

Is there any advantage to using a 99-spec for a stage 3 core?

Bryan@BNR · 02-29-2008, 10:56 PM

The only things is the turbine housings have added nickel to help with the cracking isssue.

80 CID · 02-29-2008, 11:01 PM

I'll keep that in mind. Thanks for the quick answer.

TRISPEEDFD3S · 03-01-2008, 03:16 AM

Quote:

Originally Posted by Bryan@BNR

The only things is the turbine housings have added nickel to help with the cracking isssue.

Wow...I've never known that...can those be purchased from Mazda?

***Herblenny*** · 03-01-2008, 07:54 AM

WOW! I never knew that either.

RX7 RAGE · 03-01-2008, 08:27 PM

that's good to know

rotarymandan · 03-07-2008, 07:18 PM

That is good to know. But is the housing being nickel really worth the extra money compared to a good set of 93 turbos? Either way, I definately see a set of BNRs going on my car sometime in the future...

Bryan@BNR · 03-08-2008, 02:15 PM

Quote:

Originally Posted by rotarymandan

That is good to know. But is the housing being nickel really worth the extra money compared to a good set of 93 turbos? Either way, I definately see a set of BNRs going on my car sometime in the future...

No its not worth the money. When I build the 3's, I radius all the sharp corners that are proned to cracking. If the 99's are leaking or have problems, then they would be a great core to use for the conversion.

Bryan@BNR

HDP · 11-22-2010, 07:52 PM

What is the turnaround time on a set of stage III?

porschepilot79 · 11-27-2010, 02:08 AM

Great info! One thing im wondering is if its a good idea to cyro the turbine housing to make it stronger to stop cracking? Also, If the housing is cracked should that not be used for the upgrade? Thanks!

02-24-2008, 09:59 AM	#1
HDP Rotary Fanatic Join Date: Feb 2008 Location: HuntsVEGAS iTrader: (0) Posts: 249 Rep Power: 17	Rebuildable Cores Just wondering if 99 spec turbos can be used as stage III core.

03-01-2008, 07:54 AM	#7
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 iTrader: (11) Posts: 644 Rep Power: 10	WOW! I never knew that either. __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-29-2008, 12:21 PM	#2
Bryan@BNR Rotary Fanatic Join Date: Feb 2008 iTrader: (2) Posts: 302 Rep Power: 17	yes they are good for cores for a stage 3 build up. I will not use the abradable comrpessor housings for the stage 3's. The nylon insert doesn't have enough meat to fit the larger compressor wheel, plus the nylon insert unreliable anyways. Take it easy. Bryan@BNR

02-29-2008, 10:47 PM	#3
80 CID The Newbie Join Date: Feb 2008 Location: NE Pa iTrader: (0) Posts: 3 Rep Power: 0	Is there any advantage to using a 99-spec for a stage 3 core?

02-29-2008, 10:56 PM	#4
Bryan@BNR Rotary Fanatic Join Date: Feb 2008 iTrader: (2) Posts: 302 Rep Power: 17	The only things is the turbine housings have added nickel to help with the cracking isssue.

02-29-2008, 11:01 PM	#5
80 CID The Newbie Join Date: Feb 2008 Location: NE Pa iTrader: (0) Posts: 3 Rep Power: 0	I'll keep that in mind. Thanks for the quick answer.

03-01-2008, 08:27 PM	#8
RX7 RAGE The Newbie Join Date: Mar 2008 Location: San Diego, CA iTrader: (0) Posts: 27 Rep Power: 0	that's good to know

03-07-2008, 07:18 PM	#9
rotarymandan The Newbie Join Date: Mar 2008 iTrader: (0) Posts: 5 Rep Power: 0	That is good to know. But is the housing being nickel really worth the extra money compared to a good set of 93 turbos? Either way, I definately see a set of BNRs going on my car sometime in the future...

11-22-2010, 07:52 PM	#11
HDP Rotary Fanatic Join Date: Feb 2008 Location: HuntsVEGAS iTrader: (0) Posts: 249 Rep Power: 17	What is the turnaround time on a set of stage III?

11-27-2010, 02:08 AM	#12
porschepilot79 The Newbie Join Date: Mar 2010 iTrader: (0) Posts: 3 Rep Power: 0	Great info! One thing im wondering is if its a good idea to cyro the turbine housing to make it stronger to stop cracking? Also, If the housing is cracked should that not be used for the upgrade? Thanks!