South Carolina Zoom-Fest group

reese.leblanc · 05-19-2010, 10:45 PM

WHAT: Zoom Fest 2010
WHERE: Talladega, AL at Talladega Grand Prix
WHEN: July 17-18.
WHO: YOU GUYS!

Ok, I'm already planning to make it down there to at least hang out and, if I can swing it, run in the open track/time attack. I want to see who is up for making the trip so we can plan on a time to leave, a place to stay Friday night, etc.

Even if you don't have any interest in driving in the open sessions, there will be a parade lap where you get to go around the track without the competitive side to it. Also, there will be a car show, food, and rotorheads galore!

Nicole and I will be in the vert. Who else is coming?

1twistedrx7 · 05-21-2010, 12:14 PM

this sounds awesome! I could bring a few rotor heads. hmmmmm

88turboii · 05-23-2010, 10:42 PM

I am there

***TitaniumTT*** · 05-24-2010, 12:30 AM

Rico, your ass needs to go. I'm going, Tray last I heard was gonna bunk with me, should be badass.... I'm so there, driving a route that takes me through the Dragon too so if you're heading down, we gotta meet up and roll down together.

reese.leblanc · 05-24-2010, 09:25 AM

TTT, awesome, I'll finally be able to see your car in person and meet you! When are you coming through SC?

Due to not finding anyone around here to build a bar for a reasonable cost, no time attack for me. Blah. I'm still coming though!

***TitaniumTT*** · 05-24-2010, 12:11 PM

Sweet!

Right now the plan is to drive through the Dragon just becuase and then whatever mapquest or my GPS says from there.

So if there are any guys that want to meet in NC or TN and ride through, lets do it. I know Rico and Tray are about an hour away

bwaits · 05-24-2010, 03:26 PM

Quote:

Originally Posted by reese.leblanc

TTT, awesome, I'll finally be able to see your car in person and meet you! When are you coming through SC?

Due to not finding anyone around here to build a bar for a reasonable cost, no time attack for me. Blah. I'm still coming though!

Have you tried Kirk cages in Alabama? I think they have a bolt in rear bar <- http://www.kirkracing.com/

What about I/O Port and those other bolt in bar vendors?

-billy

reese.leblanc · 05-24-2010, 07:39 PM

The downside to the Kirk is that the less expensive one won't meet tech. The more expensive one requires welding of the rear mounts. Due to future stereo upgrades, etc that isn't my best option. I may have something being worked out with a member of the other forum from down in mid-FL. I've heard some good things about him, so we'll see.

***TitaniumTT*** · 05-24-2010, 09:54 PM

My bar is a variation of the kirk cage. I'd give 'em a call, they worked with me on a one off setup for my car, I don't see why they couldn't make something that wouldn't require welding and still meet tech.

05-19-2010, 10:45 PM	#1
reese.leblanc Doing my own thing Join Date: Feb 2008 iTrader: (2) Posts: 209 Rep Power: 17	South Carolina Zoom-Fest group WHAT: Zoom Fest 2010 WHERE: Talladega, AL at Talladega Grand Prix WHEN: July 17-18. WHO: YOU GUYS! Ok, I'm already planning to make it down there to at least hang out and, if I can swing it, run in the open track/time attack. I want to see who is up for making the trip so we can plan on a time to leave, a place to stay Friday night, etc. Even if you don't have any interest in driving in the open sessions, there will be a parade lap where you get to go around the track without the competitive side to it. Also, there will be a car show, food, and rotorheads galore! Nicole and I will be in the vert. Who else is coming?

05-21-2010, 12:14 PM	#2
1twistedrx7 Rotary Fanatic Join Date: Feb 2008 iTrader: (11) Posts: 411 Rep Power: 0	this sounds awesome! I could bring a few rotor heads. hmmmmm __________________ Rotary Performance Motors(DGRRXI)sponsor 2011 RPM sale complete rebuilt your choice ported or bridge port short block W/RA seals 2300 no core required plus shipping. we now offer powder coating! 93 mb touring patring out sold! 93 vr touring sold 93vr died violently 93 ssm touring sold 93 black 20b project and a lot of money! underestimated !! http://rotorfest.lefora.com

05-24-2010, 12:30 AM	#4
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Rico, your ass needs to go. I'm going, Tray last I heard was gonna bunk with me, should be badass.... I'm so there, driving a route that takes me through the Dragon too so if you're heading down, we gotta meet up and roll down together. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

05-24-2010, 12:11 PM	#6
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Sweet! Right now the plan is to drive through the Dragon just becuase and then whatever mapquest or my GPS says from there. So if there are any guys that want to meet in NC or TN and ride through, lets do it. I know Rico and Tray are about an hour away __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

05-24-2010, 09:54 PM	#9
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	My bar is a variation of the kirk cage. I'd give 'em a call, they worked with me on a one off setup for my car, I don't see why they couldn't make something that wouldn't require welding and still meet tech. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

05-23-2010, 10:42 PM	#3
88turboii destroy, rebuild, repeat Join Date: Feb 2008 Location: Charleston, SC iTrader: (0) Posts: 395 Rep Power: 17	I am there

05-24-2010, 09:25 AM	#5
reese.leblanc Doing my own thing Join Date: Feb 2008 iTrader: (2) Posts: 209 Rep Power: 17	TTT, awesome, I'll finally be able to see your car in person and meet you! When are you coming through SC? Due to not finding anyone around here to build a bar for a reasonable cost, no time attack for me. Blah. I'm still coming though!

05-24-2010, 07:39 PM	#8
reese.leblanc Doing my own thing Join Date: Feb 2008 iTrader: (2) Posts: 209 Rep Power: 17	The downside to the Kirk is that the less expensive one won't meet tech. The more expensive one requires welding of the rear mounts. Due to future stereo upgrades, etc that isn't my best option. I may have something being worked out with a member of the other forum from down in mid-FL. I've heard some good things about him, so we'll see.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode