FS: Rotary-Works 90MM TB

KaiFD3S · 03-26-2010, 03:18 PM

My lazy ass is too lazy to deal with installing this, and adjusting the TPS so I decided to sell as I really would not benefit as I am happy with the way the car is right now, this was basically an impulse buy.

Brand new never mounted

For more info go to their website. This showed a 10HP increase just by installing.

This goes for $375.00

Looking to get $360.00 shipped or trade with a V1Radar Detector.

KaiFD3S · 03-26-2010, 08:53 PM

Sold

***ZGN*** · 03-26-2010, 10:34 PM

That was a quick sale

***TitaniumTT*** · 03-26-2010, 10:54 PM

It was another impulse buy... it'll be back up in a few months

KaiFD3S · 03-27-2010, 01:18 PM

Haha, I dont think it will be back up as the person who bought it is in the process of putting his motor together I believe, but who know, I may just buy another one later..LOL..

***TitaniumTT*** · 03-27-2010, 01:56 PM

I actually kinda wanna get intouch with them about affixing a DBW setup on it for my next PJ. Was the piece really as well built as it looks in the pics?

KaiFD3S · 03-27-2010, 02:09 PM

Yes it was very well built, if I was just not lazy to work on the car I would have installed it, but once my engine blows I will buy one, to me this is way better than a ported stock TB specially if you are running a single turbo. This TB would be perfect for you crazy ass ride, I wish I had the time and knowledge that you have to do what you did to your FC as that is exactly what I want to do but don't have all the resources and time to do it.

***TitaniumTT*** · 03-27-2010, 10:49 PM

Thanks man! You've got a pretty bad ass ride as well. I'm about to do it all over again with the FD too

Good to know about the TB. I'm pretty interested in it a DBW setup, well, depending on how the ignition/fuel cut works on the FC

misterstyx69 · 04-20-2010, 09:10 PM

there is another Throttle body out that was done RC..it has 48 mm primary and 55(or 53) mm secondary Butterflies.
Sleeper Throttle body,,japan2La has em on the other forum though( and they are NOT cheap!)

03-26-2010, 03:18 PM	#1
KaiFD3S Rotary Fanatic Join Date: Mar 2008 Posts: 437 Rep Power: 18	FS: Rotary-Works 90MM TB My lazy ass is too lazy to deal with installing this, and adjusting the TPS so I decided to sell as I really would not benefit as I am happy with the way the car is right now, this was basically an impulse buy. Brand new never mounted For more info go to their website. This showed a 10HP increase just by installing. This goes for $375.00 Looking to get $360.00 shipped or trade with a V1Radar Detector. __________________ RE AD FACER 9 Last edited by KaiFD3S; 03-26-2010 at 05:16 PM.

03-26-2010, 10:34 PM	#3
*ZGN* Administrator Join Date: Jan 2008 Location: Birmingham, AL Posts: 2,264 Rep Power: 10	That was a quick sale __________________ Kevin

03-26-2010, 10:54 PM	#4
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	It was another impulse buy... it'll be back up in a few months __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

03-27-2010, 01:56 PM	#6
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	I actually kinda wanna get intouch with them about affixing a DBW setup on it for my next PJ. Was the piece really as well built as it looks in the pics? __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

03-27-2010, 10:49 PM	#8
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Thanks man! You've got a pretty bad ass ride as well. I'm about to do it all over again with the FD too Good to know about the TB. I'm pretty interested in it a DBW setup, well, depending on how the ignition/fuel cut works on the FC __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

03-26-2010, 08:53 PM	#2
KaiFD3S Rotary Fanatic Join Date: Mar 2008 Posts: 437 Rep Power: 18	Sold

03-27-2010, 01:18 PM	#5
KaiFD3S Rotary Fanatic Join Date: Mar 2008 Posts: 437 Rep Power: 18	Haha, I dont think it will be back up as the person who bought it is in the process of putting his motor together I believe, but who know, I may just buy another one later..LOL..

03-27-2010, 02:09 PM	#7
KaiFD3S Rotary Fanatic Join Date: Mar 2008 Posts: 437 Rep Power: 18	Yes it was very well built, if I was just not lazy to work on the car I would have installed it, but once my engine blows I will buy one, to me this is way better than a ported stock TB specially if you are running a single turbo. This TB would be perfect for you crazy ass ride, I wish I had the time and knowledge that you have to do what you did to your FC as that is exactly what I want to do but don't have all the resources and time to do it.

04-20-2010, 09:10 PM	#9
misterstyx69 .drives like MrMagoo! Join Date: Feb 2008 Location: Smiths Falls,Ontario Posts: 198 Rep Power: 18	there is another Throttle body out that was done RC..it has 48 mm primary and 55(or 53) mm secondary Butterflies. Sleeper Throttle body,,japan2La has em on the other forum though( and they are NOT cheap!)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode