Aftermarket hood

EJayCe996 · 07-23-2009, 04:37 PM

There is actually a lot of differences between the two. The Panspeed looks more geared to a H-mount type setup, the vent is further forward on the hood and the lower edges of the vent are almost perfectly parallel to the ground when the hood is closed. The vent is also slightly more wide and much longer with more lip on the vent. The GK has a more narrow and angled opening. On another note, the FCs I've seen running a GK hood all had front mounts.

WE3RX7 · 07-24-2009, 07:49 AM

Yea - I am using FMIC but still want the panspeed.. honestly, the GK would have my vote if it had the additional exhaust vent...

Shine hasnt released an update on the hood though or a CF price... I'm in no rush, but it would be good to know, lol...

***TitaniumTT*** · 07-24-2009, 08:08 PM

Either one of those I would have to modify for my setup as I want the hood ducted to the intercooler. Something about the GK hood though appeals to me more.

Regardless, I'm building my own for now. Don't know when it'll be done, but I'm doing it.

***TitaniumTT*** · 08-22-2009, 02:37 PM

AND it's done

vex · 08-22-2009, 06:56 PM

That's pure sex and a half.

BigIslandSevens · 08-22-2009, 07:03 PM

That is very nice. Amazing amount of work to perform as well. Like others have said. Offer it up to the reproduction gods ASAP. My girls FC needs that.

EJayCe996 · 08-26-2009, 10:20 PM

Looks like there is finally some progress, lulz.

He said they're further along than what's shown in this picture.

I can see it now... me having 3 hoods(TTT hotness, GK, Panspeed) and using the excuse of "1 for the track, 1 for car shows, and 1 for the street"

***TitaniumTT*** · 08-27-2009, 07:49 AM

Everything about that hood looks too abrupt to me now. I think it's time to get in touch with Rob (fiberglass guy)

WE3RX7 · 08-27-2009, 04:20 PM

Which hood the PS or yours? I still think I'm going to do the PS hood if they ever finished it. I actually emailed Ken on Tuesday and told him I'm ready to buy it now if he's close to being finished. I'd really like to get my car to paint before the wedding! I really just need this hood and the front bumper... the side skirts I can deal with after the paint if needed....

Phoenix7 · 08-27-2009, 04:29 PM

Quote:

Originally Posted by TitaniumTT

AND it's done

looks great Titanium!

***TitaniumTT*** · 09-16-2009, 08:41 PM

Thanks Phoenix.

Looks like Shine finally made some progress and Bill is set for a deposit......... so what are the chances of your FC being @ DGRR '10?

WE3RX7 · 09-16-2009, 10:22 PM

HA - I'm going to guess at the rate everything is moving that it wont be ready for DGRR '10 so for NOW I'll let you hold that "Best FC" title, but DGRR 2011 its all mine

But seriously, I've been talking to Ken at length over the last few weeks. I called him yesterday to put the deposit down on the hood and some other aero parts, but with my wedding coming up and the honeymoon afterwards, I wont see those things until mid-late October. It does sound like Shine will have the hoods ready to go in about two weeks though for anybody who's on the list. So far I'm the only CF one I know of...

07-23-2009, 04:37 PM	#121
EJayCe996 PPP-P-P-P-POWER! Join Date: Feb 2008 Location: North GP, TX iTrader: (0) Posts: 283 Rep Power: 17	There is actually a lot of differences between the two. The Panspeed looks more geared to a H-mount type setup, the vent is further forward on the hood and the lower edges of the vent are almost perfectly parallel to the ground when the hood is closed. The vent is also slightly more wide and much longer with more lip on the vent. The GK has a more narrow and angled opening. On another note, the FCs I've seen running a GK hood all had front mounts. __________________ 1. Walk through a row of 22", or larger, rims 2. Say you love dubstep 3. ????? 4. PROFIT! Axiomatic: Total cacology.

07-24-2009, 08:08 PM	#123
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Either one of those I would have to modify for my setup as I want the hood ducted to the intercooler. Something about the GK hood though appeals to me more. Regardless, I'm building my own for now. Don't know when it'll be done, but I'm doing it. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

08-22-2009, 02:37 PM	#124
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	AND it's done __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

08-22-2009, 06:56 PM	#125
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. iTrader: (6) Posts: 2,113 Rep Power: 19	That's pure sex and a half. __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group

08-26-2009, 10:20 PM	#127
EJayCe996 PPP-P-P-P-POWER! Join Date: Feb 2008 Location: North GP, TX iTrader: (0) Posts: 283 Rep Power: 17	Looks like there is finally some progress, lulz. He said they're further along than what's shown in this picture. I can see it now... me having 3 hoods(TTT hotness, GK, Panspeed) and using the excuse of "1 for the track, 1 for car shows, and 1 for the street" __________________ 1. Walk through a row of 22", or larger, rims 2. Say you love dubstep 3. ????? 4. PROFIT! Axiomatic: Total cacology.

07-24-2009, 07:49 AM	#122
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA iTrader: (1) Posts: 1,812 Rep Power: 18	Yea - I am using FMIC but still want the panspeed.. honestly, the GK would have my vote if it had the additional exhaust vent... Shine hasnt released an update on the hood though or a CF price... I'm in no rush, but it would be good to know, lol...

08-22-2009, 07:03 PM	#126
BigIslandSevens Rotary Fanatic Join Date: Feb 2008 Location: Denver, NC iTrader: (0) Posts: 201 Rep Power: 17	That is very nice. Amazing amount of work to perform as well. Like others have said. Offer it up to the reproduction gods ASAP. My girls FC needs that.

08-27-2009, 07:49 AM	#128
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Everything about that hood looks too abrupt to me now. I think it's time to get in touch with Rob (fiberglass guy) __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

08-27-2009, 04:20 PM	#129
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA iTrader: (1) Posts: 1,812 Rep Power: 18	Which hood the PS or yours? I still think I'm going to do the PS hood if they ever finished it. I actually emailed Ken on Tuesday and told him I'm ready to buy it now if he's close to being finished. I'd really like to get my car to paint before the wedding! I really just need this hood and the front bumper... the side skirts I can deal with after the paint if needed....

09-16-2009, 08:41 PM	#131
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Thanks Phoenix. Looks like Shine finally made some progress and Bill is set for a deposit......... so what are the chances of your FC being @ DGRR '10? __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

09-16-2009, 10:22 PM	#132
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA iTrader: (1) Posts: 1,812 Rep Power: 18	HA - I'm going to guess at the rate everything is moving that it wont be ready for DGRR '10 so for NOW I'll let you hold that "Best FC" title, but DGRR 2011 its all mine But seriously, I've been talking to Ken at length over the last few weeks. I called him yesterday to put the deposit down on the hood and some other aero parts, but with my wedding coming up and the honeymoon afterwards, I wont see those things until mid-late October. It does sound like Shine will have the hoods ready to go in about two weeks though for anybody who's on the list. So far I'm the only CF one I know of...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode