FD3S RX-7 Engine Mounted Oil Catch Tank GB

FierceAlien · 09-02-2011, 10:59 PM

Can you provide us a rough ball park on this time frame? 1 month, 3 months, etc...

aoc007 · 09-03-2011, 12:26 AM

Quote:

Originally Posted by afgmoto1978

Update, okay first I want to let everyone know I accepted a job with BMW at the BMW Performance Test Center in Greenville, South Carolina. I will be leaving Oregon tomorrow.

I did my best, but I was not able to get all the tanks done. Once I get settled into South Carolina will commence fabrication of the tanks. I want to apologize for the inconvenience. I will give you guys a ETA on completion when I get back into the fabricating the tanks.

Adam

Ah man I'm jealous! Have fun.

speedjunkie · 09-03-2011, 07:00 PM

No worries here. I'll be out of country until January anyway haha.

Good luck with the new job!

afgmoto1978 · 09-15-2011, 08:06 PM

Quote:

Originally Posted by FierceAlien

Can you provide us a rough ball park on this time frame? 1 month, 3 months, etc...

As soon as I get access to a TIG welder I will be roughly a month out from there. Working on finding a TIG welder, local powder coater and a place I can get silver brazing done.

speedjunkie · 09-22-2011, 11:28 PM

Quick question, where does the hose from the filler neck go, right to the top? I was thinking about doing the Damian filler neck from Re-Speed with the -10 fitting, but I don't want to if it won't work with this can or if it's not worth it. Your thoughts Adam?

RedR1 · 10-11-2011, 04:32 PM

We need to meet up for dinner, Adam!!!

FierceAlien · 10-20-2011, 05:37 AM

Its been over a month since the last update. I was not expecting this to take this long. Any news on finishing this product you are offering?

afgmoto1978 · 11-07-2011, 04:06 PM

Alright guys, sorry this has taken so long. I really apologize for this. I will finally be able to order the welder I need to finish this project later this week. Once I get the welder I will focus all my spare time to get these tanks done. My estimate is I will be done with these tanks by middle of December.

Thank you all for being patient.

Adam

speedjunkie · 11-07-2011, 05:00 PM

Sweet! I'm stoked!

afgmoto1978 · 11-19-2011, 10:45 PM

Okay guys as of tomorrow I'm back into production of these tanks.

FierceAlien · 12-07-2011, 06:41 AM

Greetings,

How goes the production since you started back up a few weeks ago. Can we get an update again please.

Thanks.

silverfdturbo6port · 12-07-2011, 05:22 PM

Id like to pick one up but i dont want to wait a decade

afgmoto1978 · 12-08-2011, 09:58 PM

Sigh, I want to apologize, unfortunately my welder went into a fritz and it needs to get it fixed. I'm waiting for a reply from a Miller tech services rep on what needs to be fixed.

So at this point in time I'm on hold again on welding the remaining tanks until I can get it fixed. I'm really really sorry about this guys.

At this point in time I have three tanks that are completely welded up and ready to be put together as kits. So in the meantime while I try and get my welder fixed I will be finishing three catch tank kits ASAP. I will be working on the rear turbo side vent lines and remaining parts needed this weekend.

So at this point in time I need to know which three of the list below needs tanks NOW instead of later.

1. speedjunkie - Dep
2. RedR1 - Deposit Paid - Polished Catch Tank
3. Zhe
4. Scrubolio - Dep

The guys below I know are either not in a position that they need the tanks NOW in order to get their cars running OR need premix tanks which I do not have any done. Thanks for your patience guys! FierceAlien, I'm really sorry.

1. Astrokid - Paid in Full - Catch Tank - Raw Finish
2. Matt Hardwick - Xenocide0 - Deposit Paid - Pre - Mix Tank - Satin Black
3. FierceAlien - Deposit Paid - Premix tank - Satin Black
4. Jesse Frame - aka Prometheus - Paid in Full - Catch Tank - Satin Finish
5. Rob - Paid in full - Custom AN Fittings - Raw finish
6. aoc007 - Paid in Full - Catch Tank - Satin Black

aoc007 · 12-08-2011, 10:07 PM

I still have the old tank so I dont need the new one right away but I'd like to have it in the next couple months before the new track season starts.

afgmoto1978 · 12-08-2011, 10:07 PM

Quote:

Originally Posted by silverfdturbo6port

Id like to pick one up but i dont want to wait a decade

Lol, in won't be a decade from now. If your serious I will be selling my extra tank early next year, mind you at full price. If you want it buy it.

Adam

12-08-2011, 09:58 PM	#103
afgmoto1978 Rotary Fanatic Join Date: Mar 2008 Location: Portland, Oregon iTrader: (2) Posts: 381 Rep Power: 17	Sigh, I want to apologize, unfortunately my welder went into a fritz and it needs to get it fixed. I'm waiting for a reply from a Miller tech services rep on what needs to be fixed. So at this point in time I'm on hold again on welding the remaining tanks until I can get it fixed. I'm really really sorry about this guys. At this point in time I have three tanks that are completely welded up and ready to be put together as kits. So in the meantime while I try and get my welder fixed I will be finishing three catch tank kits ASAP. I will be working on the rear turbo side vent lines and remaining parts needed this weekend. So at this point in time I need to know which three of the list below needs tanks NOW instead of later. 1. speedjunkie - Dep 2. RedR1 - Deposit Paid - Polished Catch Tank 3. Zhe 4. Scrubolio - Dep The guys below I know are either not in a position that they need the tanks NOW in order to get their cars running OR need premix tanks which I do not have any done. Thanks for your patience guys! FierceAlien, I'm really sorry. 1. Astrokid - Paid in Full - Catch Tank - Raw Finish 2. Matt Hardwick - Xenocide0 - Deposit Paid - Pre - Mix Tank - Satin Black 3. FierceAlien - Deposit Paid - Premix tank - Satin Black 4. Jesse Frame - aka Prometheus - Paid in Full - Catch Tank - Satin Finish 5. Rob - Paid in full - Custom AN Fittings - Raw finish 6. aoc007 - Paid in Full - Catch Tank - Satin Black Last edited by afgmoto1978; 12-08-2011 at 10:15 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-02-2011, 10:59 PM	#91
FierceAlien The Newbie Join Date: Feb 2008 iTrader: (0) Posts: 17 Rep Power: 0	Can you provide us a rough ball park on this time frame? 1 month, 3 months, etc...

09-03-2011, 07:00 PM	#93
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO iTrader: (1) Posts: 2,089 Rep Power: 19	No worries here. I'll be out of country until January anyway haha. Good luck with the new job!

09-22-2011, 11:28 PM	#95
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO iTrader: (1) Posts: 2,089 Rep Power: 19	Quick question, where does the hose from the filler neck go, right to the top? I was thinking about doing the Damian filler neck from Re-Speed with the -10 fitting, but I don't want to if it won't work with this can or if it's not worth it. Your thoughts Adam?

10-11-2011, 04:32 PM	#96
RedR1 Brokeback Power! Join Date: Feb 2008 iTrader: (0) Posts: 290 Rep Power: 17	We need to meet up for dinner, Adam!!!

10-20-2011, 05:37 AM	#97
FierceAlien The Newbie Join Date: Feb 2008 iTrader: (0) Posts: 17 Rep Power: 0	Its been over a month since the last update. I was not expecting this to take this long. Any news on finishing this product you are offering?

11-07-2011, 04:06 PM	#98
afgmoto1978 Rotary Fanatic Join Date: Mar 2008 Location: Portland, Oregon iTrader: (2) Posts: 381 Rep Power: 17	Alright guys, sorry this has taken so long. I really apologize for this. I will finally be able to order the welder I need to finish this project later this week. Once I get the welder I will focus all my spare time to get these tanks done. My estimate is I will be done with these tanks by middle of December. Thank you all for being patient. Adam

11-07-2011, 05:00 PM	#99
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO iTrader: (1) Posts: 2,089 Rep Power: 19	Sweet! I'm stoked!

11-19-2011, 10:45 PM	#100
afgmoto1978 Rotary Fanatic Join Date: Mar 2008 Location: Portland, Oregon iTrader: (2) Posts: 381 Rep Power: 17	Okay guys as of tomorrow I'm back into production of these tanks.

12-07-2011, 06:41 AM	#101
FierceAlien The Newbie Join Date: Feb 2008 iTrader: (0) Posts: 17 Rep Power: 0	Greetings, How goes the production since you started back up a few weeks ago. Can we get an update again please. Thanks.

12-07-2011, 05:22 PM	#102
silverfdturbo6port 500hp club Join Date: Feb 2011 Location: spokane iTrader: (0) Posts: 79 Rep Power: 14	Id like to pick one up but i dont want to wait a decade

12-08-2011, 10:07 PM	#104
aoc007 The Newbie Join Date: Jan 2009 iTrader: (0) Posts: 8 Rep Power: 0	I still have the old tank so I dont need the new one right away but I'd like to have it in the next couple months before the new track season starts.