Diary of a Madman; TitaniumTT's see you @ DGRRXI RE-REbuild

***TitaniumTT*** · 04-21-2011, 11:40 PM

Hell of an upgrade.... have you ridden stances yet.... aside from my car?

EJayCe996 · 04-21-2011, 11:51 PM

Quote:

Originally Posted by TitaniumTT

Hell of an upgrade.... have you ridden stances yet.... aside from my car?

Yessir, I've been on one of the original releases of them since they were first introduced.

hades · 04-22-2011, 06:00 AM

Quote:

Originally Posted by TitaniumTT

I've already got one caliper here, the second was supposed to be overnighted yesterday but I haven't seen it yet. I was supposed to drive the FC out to Daves on Wednesday to get the tranny thing figured out but a few things happened, the tranny broke again, and I couldn't get brake pressure. I still had the stock cali's on, but couldn;'t get pressure from the master. I've got a different master

but I didn't have lines for it, those showed up yesterday afternoon, only a week late.

So I've got A master, and a few lines, still missing some lines, 4 rotors, 2 sets of pads, 3 calipers, and 2 sets of pads

I thought about stealing the brakes from the 'vert, but they've been sitting stagnant for almost 4 years now, not sure I'd trust those on the dragon when my well lovefd brakes faded to nothing on the dragon.

All in all it's a horrible nightmare from which there is no escape...

Where are you flying into?

Ship me your brakes damnit! No wait, those won't work.... EJ, send me yours

I fly into the Nashville then drive out. I was going to a lake after the event, but that got cancelled. So I haven't decided when I will fly back.

vex · 04-22-2011, 08:34 AM

Quote:

Originally Posted by TitaniumTT

You have a kid????

...No... I don't have a kid. Not yet. I'm so confused.

Quote:

Pretty quick, with the exception of what was backordered

They haven't sent me a shipping notification yet, so I get the impression they haven't shipped what I asked for yet. This puts me in the same boat as you (I can't readily put the harness together without the heatshrink on there).

***TitaniumTT*** · 04-22-2011, 12:36 PM

I didn't think you had a kid. You said after the job you'll build something for 500. I'm saying I've heard that before. After you get the job, other things will get in the way, family, house, kid, mistress, second kid, etc etc etc...... much like 2010 was supposed to bne the year of the FC, then FC meant first child..... get it?

vex · 04-22-2011, 04:56 PM

Quote:

Originally Posted by TitaniumTT

I didn't think you had a kid. You said after the job you'll build something for 500. I'm saying I've heard that before. After you get the job, other things will get in the way, family, house, kid, mistress, second kid, etc etc etc...... much like 2010 was supposed to bne the year of the FC, then FC meant first child..... get it?

No... but that's okay. I probably won't understand for awhile. I just laugh at the thought of trying to get to 500 HP without a source of income or a place to call my own. :Lol:

Turbo II Rotor · 04-22-2011, 05:28 PM

Quote:

Originally Posted by TitaniumTT

I did put eh RX8 5-spd knob on my Cherokee though so I'll at least be bringing the rotary spirit with me

Boo.

***TitaniumTT*** · 04-23-2011, 12:05 AM

Quote:

Originally Posted by vex

No... but that's okay. I probably won't understand for awhile. I just laugh at the thought of trying to get to 500 HP without a source of income or a place to call my own. :Lol:

Welllllllll if you were going to Deals, I could explain it to you there.... buuuuuuuuuuuutttttttt.... yeah

Quote:

Originally Posted by Turbo II Rotor

Boo.

Yeah I know, blows. Still trying but it's looking pretty damn doubtful. MOST of the brakes came in but I'm still missing some pretty key parts. And to make matters worse, I can't get even steal the parts that I need from the 'vert as they are in WORSE shape than the ones I got. Just to tease all of you though, I'm going to take some pics of the new brake setup and make you all green with envy, then I'm going to never show any of you

***TitaniumTT*** · 04-23-2011, 12:09 AM

Scott, what are your travel times and routes and whatnot?

vex · 04-23-2011, 11:42 AM

Quote:

Originally Posted by TitaniumTT

Welllllllll if you were going to Deals, I could explain it to you there.... buuuuuuuuuuuutttttttt.... yeah

If you need something to blame; blame prowire. I still haven't received my heat shrink I ordered. In fact I have received stuff that I ordered after it. They're taking their sweet time.

hades · 04-23-2011, 12:17 PM

Quote:

Originally Posted by TitaniumTT

Scott, what are your travel times and routes and whatnot?

who is scott?

***TitaniumTT*** · 04-23-2011, 12:19 PM

Quote:

Originally Posted by vex

If you need something to blame; blame prowire. I still haven't received my heat shrink I ordered. In fact I have received stuff that I ordered after it. They're taking their sweet time.

Pssssshhhhh, how many years you been working on this girl? We have no one to blame but ourselves

Quote:

Originally Posted by hades

who is scott?

Congrats... 1000th post!!!! DAYUM

Scott = Turbo II Rotor

vex · 04-23-2011, 01:15 PM

Quote:

Originally Posted by TitaniumTT

Pssssshhhhh, how many years you been working on this girl? We have no one to blame but ourselves

Let me think... I wrecked my first 7 in December of '06, swapped to a roller during spring break of '07 to the summer, rebuild and turbo swap in winter '08, Drove it around in '09-'10, and now upgrading the ECU in '11. I seriously only need the heat shrink to get this car ready to tune... well not really, but basically.

***TitaniumTT*** · 04-23-2011, 01:51 PM

Huh, so I guess you were running it around for the last year or so turbo'ed on the stocker TII ecu???

BTW - rear brakes are kinda sorta done... got some fab work to do to make the Lokar e-brake cable work, and of course I'm waiting on some crush washers that are supposed to be here Tuesday to make connections...... HOLLY CRAP are they fucking HUGE!!! I couldn't fit a **** hair between the caliper and the wheel if I wanted too

vex · 04-23-2011, 02:18 PM

Quote:

Originally Posted by TitaniumTT

Huh, so I guess you were running it around for the last year or so turbo'ed on the stocker TII ecu???

No... I was using an NA S4 RTek 2.1... which just wasn't cutting it at all. So I upgraded to a full stand alone.

Quote:

BTW - rear brakes are kinda sorta done... got some fab work to do to make the Lokar e-brake cable work, and of course I'm waiting on some crush washers that are supposed to be here Tuesday to make connections...... HOLLY CRAP are they fucking HUGE!!! I couldn't fit a **** hair between the caliper and the wheel if I wanted too

Pics or it didn't happen.

04-21-2011, 11:40 PM	#991
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Hell of an upgrade.... have you ridden stances yet.... aside from my car? __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

04-22-2011, 12:36 PM	#995
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	I didn't think you had a kid. You said after the job you'll build something for 500. I'm saying I've heard that before. After you get the job, other things will get in the way, family, house, kid, mistress, second kid, etc etc etc...... much like 2010 was supposed to bne the year of the FC, then FC meant first child..... get it? __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

04-23-2011, 12:09 AM	#999
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Scott, what are your travel times and routes and whatnot? __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

04-23-2011, 01:51 PM	#1004
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Huh, so I guess you were running it around for the last year or so turbo'ed on the stocker TII ecu??? BTW - rear brakes are kinda sorta done... got some fab work to do to make the Lokar e-brake cable work, and of course I'm waiting on some crush washers that are supposed to be here Tuesday to make connections...... HOLLY CRAP are they fucking HUGE!!! I couldn't fit a ** hair between the caliper and the wheel if I wanted too __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. -Angry Motherfcker Mode ENGAGED-*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode