TitaniumTT's I hope I make it to DGRR '09 Build

WE3RX7 · 01-08-2010, 11:15 AM

How many sqft is your garage Brian?

***TitaniumTT*** · 01-08-2010, 12:36 PM

Quote:

Originally Posted by helghast7

lucky!! last time i worked on the FD i was putting in the shock assemblies, was so damn cold i gave up after getting 3 of the 4 back in...been sitting like that ever since

what sucks more is i need to cean/wash the engine bay to really progress.... one FD-sicle coming up!!

Yeah, I need to give the FC a wash and a wax before I start the teardown too. Heated garages are awesome.

Quote:

Originally Posted by WE3RX7

How many sqft is your garage Brian?

The garage itself is about 440sq'. The original Annex right off one of the bay doors is about 180 sq' and Le Annex Part Duex (off the side, not connected but serves as storage for the FD, the trailer, and the FC parts when the time comes) is about 250 sq' Basically my next house is going to need to have enough land to build a 4bay detached garage or an attached 2 bay and the ability to build a 3bay outback somewhere.

Nismo · 01-09-2010, 01:17 PM

Brian, you know where to get everything, you happen to know where I can get a Flange for a 50mm HKS wastegate? I can't find one on eBay.

Thanks,

Kevin

helghast7 · 01-09-2010, 04:02 PM

you should try doing a google search, theres some websites that sell them, i just bought a v-band flange for my tial bov on a site i found on google

***TitaniumTT*** · 01-09-2010, 07:02 PM

I would check out ATP Turbo or Verocious Motorsports

Aight, last installment for this thread, then it's off to the Diary of a Madman - See you at DGRRX thread

helghast7 · 01-09-2010, 07:35 PM

idk if its just my computer but the pics arent working

WE3RX7 · 01-09-2010, 10:26 PM

Dimensionally that looks pretty good - I cant tell how tall they sit near the headliner, but I'll check it out at DGRR. Seats do match the interior well...

FC3S Murray · 01-10-2010, 09:19 AM

Not bad Brian...not bad. They must feel WAY better then the stock worn out seats.

Is that passenger seat bolted down?? It looks like it sits cock-eyed a bit...

So you are planning on running different seats for racing or all together??

I LIKE the center window switch set up, very cool like a BMW!!

BigIslandSevens · 01-10-2010, 09:23 AM

I would guess that the seat is bolted down. The FC and FB have a clever system that mounts the inboard rail a couple inches higher and on an angle with the trans tunnel. This makes it almost impossible to mount a seat properly, as the Adjustment is built into the seat frames mounting.( stock)

When I put the FD seats in the FB I ran into the exact problems as he did. The seats are just not dimensionally close at all. IMO. The bottoms of the seats drop down low which in turn causes the higher seating. For me at 6'2 that doesn't work well in the FB.There is o way I can get my helmet on and fit inside the car. I found that S4 seats are a direct bolt in on the passenger side. The donor car I used did not have drivers side seat rails so I made the FB rails work. I have come to hate installing seats

***TitaniumTT*** · 01-10-2010, 10:46 AM

Quote:

Originally Posted by WE3RX7

Dimensionally that looks pretty good - I cant tell how tall they sit near the headliner, but I'll check it out at DGRR. Seats do match the interior well...

Thanks Bill, yeah I'm liking them alot so far

Quote:

Originally Posted by FC3S Murray

Not bad Brian...not bad. They must feel WAY better then the stock worn out seats.

Is that passenger seat bolted down?? It looks like it sits cock-eyed a bit...

So you are planning on running different seats for racing or all together??

I LIKE the center window switch set up, very cool like a BMW!!

They are better than the stockers, but I was running some corbeaus. Those were nice, but not the greates for scooting around town or long trips. I'll swap the corbeaus in for track days. 8 bolts, 10 minutes, best of both worlds.

It's bolted down, but becuase of the passenger side floor pan, it sits higher than the drivers. All of them do it, I think the stockers are the only ones that sit at about the same level.

Quote:

Originally Posted by BigIslandSevens

I would guess that the seat is bolted down. The FC and FB have a clever system that mounts the inboard rail a couple inches higher and on an angle with the trans tunnel. This makes it almost impossible to mount a seat properly, as the Adjustment is built into the seat frames mounting.( stock)

When I put the FD seats in the FB I ran into the exact problems as he did. The seats are just not dimensionally close at all. IMO. The bottoms of the seats drop down low which in turn causes the higher seating. For me at 6'2 that doesn't work well in the FB.There is o way I can get my helmet on and fit inside the car. I found that S4 seats are a direct bolt in on the passenger side. The donor car I used did not have drivers side seat rails so I made the FB rails work. I have come to hate installing seats

Yeah it is a PITA. In the Corbeaus I had to slouch a little with the helmet. A problem that I plan on rectifing over the winter. Something about having to slouch while racing doesn't really agree with me.

Tech B · 01-10-2010, 03:36 PM

That is a nice power band, I bet that car is fun.

helghast7 · 01-10-2010, 09:04 PM

hey Brian, ive been thinking about the item you were talking about on saturday and ive been doing some digging

i cant find shit about it, i found the theory on it, that it was produced, but nothing current, were to buy one, or any kind of specs

if you have some shoot me some links because ive been at it for a good 3 hours lol

i would love to try it out, but after reading the theory it had me a bit concerned with how reliable they are

hehe i bet everyone is scratching there heads on what im talking about

djmtsu · 01-11-2010, 12:37 PM

Sooo.....Brian. How much do you figure to replicate those RX-8 seat brackets once you have them sorted out?

Seriously!

***TitaniumTT*** · 01-11-2010, 04:16 PM

Quote:

Originally Posted by Tech B

That is a nice power band, I bet that car is fun.

Yeah she is, if I can keep traction. There's non in 1st or 2nd on low boost, and highboost breaks them loose in 3rd. I dunno if it's the cold roads or what but I can't keep the ass in line when I mat her. I gotta stop driving this car and get to work on her.

Quote:

Originally Posted by helghast7

hey Brian, ive been thinking about the item you were talking about on saturday and ive been doing some digging

i cant find shit about it, i found the theory on it, that it was produced, but nothing current, were to buy one, or any kind of specs

if you have some shoot me some links because ive been at it for a good 3 hours lol

i would love to try it out, but after reading the theory it had me a bit concerned with how reliable they are

hehe i bet everyone is scratching there heads on what im talking about

I'm sure they are. The only place to find any real information on them is the manufacturers website. It's not under the general listing though, you need to DL or open thier PDF catalog. Everything else I've found is really just internet heresay, nothing really concrete as it applies to gas engines ..... everyone still guessing

Quote:

Originally Posted by djmtsu

Sooo.....Brian. How much do you figure to replicate those RX-8 seat brackets once you have them sorted out?

Seriously!

Honestly, not that much at all. The only problem is they can't really be bolted in. They really should be welded in mainly becuase of the passenge side inboard front bracket being flush with the floorpan. The passenger outboard front, drivers outboard rear and both drivers front mounts are a piece of cake. It's also the rear inboard bolt on both that cause a huge problem. I don't know if the track can be cut or not and still allow full adjustment rearward. I'll have to figure that out when I start into the car..... which should be today but it won't be

My solution is to change the mounting entirely on the rear inboard mounts so that the bolt drives through the rack downward. I'll make installation a TON easier as well regardless of the seat that I use. But that requires a steel box with a nut welded on the inside and welding it to the floorpan. Not something that everyone is up for as the prep would take wuite some time to clean off all the heat material, grind the primer down to bare steel, weldthrough prime everything, weld it, seal it etc etc. It's a cake walk with the car at my shop..... too bad all you guys live so damn far away from CT, well, alot of you.

I could duplicate the mounts that I bulit for mine with the exception of the inboard rears fairly cheaply, but they would need to be welded to the RX8 tracks, or bolted. I prefer welding honestly. Maybe $125 for 6/8 mounts, or if I find that the rear inboard track can be cut and the factory bolt holes used we can figure something out.

jtbshaw · 01-11-2010, 05:13 PM

Brian,

Let me know if I can help you with those brackets. We laser cut and CNC press brake metal everyday here. Thos e brackets could be bolted in if you used a square frame and press brake the ends. We could even powder coat the assembly in house. If you want, let's talk more through PM. We have in-house CAD design as well.

Todd B.
(formerly NoLimitInd)

01-09-2010, 01:17 PM	#783
Nismo 400WHP or bust Join Date: Mar 2008 Location: Kincardine, Ontario Canada iTrader: (1) Posts: 165 Rep Power: 17	Brian, you know where to get everything, you happen to know where I can get a Flange for a 50mm HKS wastegate? I can't find one on eBay. Thanks, Kevin __________________ 1986 GXL- Being built with a 13B RE... http://www.rotarycarclub.com/rotary_...ead.php?t=9602 1986 Base-RB Exhaust, HKS filter, Solid Aluminum motor mounts, S5 TII motor, ACT Clutch, HKS SSQV, Light Weight Flywheel, Haltech E6X, 720cc 2ndaries, Koni Yellows, Tein Springs Koyo Rad, 250 WHP 230 FTLBS Stock turbo, and stock IC at 10psi. RIP!! The daily bitch- 1995.5 Toyota Tacoma- Trueflow airfilter, and Bilstein HD shocks. 2009 Toyota Corolla "S" TRD Filter... 40MPG

01-09-2010, 04:02 PM	#784
helghast7 F yo couch! Join Date: Dec 2009 Location: Belleville, NJ iTrader: (0) Posts: 223 Rep Power: 15	you should try doing a google search, theres some websites that sell them, i just bought a v-band flange for my tial bov on a site i found on google __________________ 87' n/a FC 94' FD-360whp, 300lbs-tq at 14psi on twins 92' ZZR-600 sold 07' CBR600RR more to come

01-09-2010, 07:02 PM	#785
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	I would check out ATP Turbo or Verocious Motorsports Aight, last installment for this thread, then it's off to the Diary of a Madman - See you at DGRRX thread __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

01-09-2010, 07:35 PM	#786
helghast7 F yo couch! Join Date: Dec 2009 Location: Belleville, NJ iTrader: (0) Posts: 223 Rep Power: 15	idk if its just my computer but the pics arent working __________________ 87' n/a FC 94' FD-360whp, 300lbs-tq at 14psi on twins 92' ZZR-600 sold 07' CBR600RR more to come

01-10-2010, 09:19 AM	#788
FC3S Murray frustrated! Join Date: Apr 2009 Location: Montana iTrader: (3) Posts: 611 Rep Power: 16	Not bad Brian...not bad. They must feel WAY better then the stock worn out seats. Is that passenger seat bolted down?? It looks like it sits cock-eyed a bit... So you are planning on running different seats for racing or all together?? I LIKE the center window switch set up, very cool like a BMW!! __________________ Same pig, new soul

01-08-2010, 11:15 AM	#781
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA iTrader: (1) Posts: 1,812 Rep Power: 18	How many sqft is your garage Brian?

01-09-2010, 10:26 PM	#787
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA iTrader: (1) Posts: 1,812 Rep Power: 18	Dimensionally that looks pretty good - I cant tell how tall they sit near the headliner, but I'll check it out at DGRR. Seats do match the interior well...

01-10-2010, 09:23 AM	#789
BigIslandSevens Rotary Fanatic Join Date: Feb 2008 Location: Denver, NC iTrader: (0) Posts: 201 Rep Power: 17	I would guess that the seat is bolted down. The FC and FB have a clever system that mounts the inboard rail a couple inches higher and on an angle with the trans tunnel. This makes it almost impossible to mount a seat properly, as the Adjustment is built into the seat frames mounting.( stock) When I put the FD seats in the FB I ran into the exact problems as he did. The seats are just not dimensionally close at all. IMO. The bottoms of the seats drop down low which in turn causes the higher seating. For me at 6'2 that doesn't work well in the FB.There is o way I can get my helmet on and fit inside the car. I found that S4 seats are a direct bolt in on the passenger side. The donor car I used did not have drivers side seat rails so I made the FB rails work. I have come to hate installing seats Last edited by BigIslandSevens; 01-10-2010 at 09:29 AM..

01-10-2010, 03:36 PM	#791
Tech B The Newbie Join Date: Dec 2009 iTrader: (0) Posts: 20 Rep Power: 0	That is a nice power band, I bet that car is fun.

01-10-2010, 09:04 PM	#792
helghast7 F yo couch! Join Date: Dec 2009 Location: Belleville, NJ iTrader: (0) Posts: 223 Rep Power: 15	hey Brian, ive been thinking about the item you were talking about on saturday and ive been doing some digging i cant find shit about it, i found the theory on it, that it was produced, but nothing current, were to buy one, or any kind of specs if you have some shoot me some links because ive been at it for a good 3 hours lol i would love to try it out, but after reading the theory it had me a bit concerned with how reliable they are hehe i bet everyone is scratching there heads on what im talking about __________________ 87' n/a FC 94' FD-360whp, 300lbs-tq at 14psi on twins 92' ZZR-600 sold 07' CBR600RR more to come

01-11-2010, 12:37 PM	#793
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (10) Posts: 4,043 Rep Power: 21	Sooo.....Brian. How much do you figure to replicate those RX-8 seat brackets once you have them sorted out? Seriously! __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

01-11-2010, 05:13 PM	#795
jtbshaw ORD - Old Rotary Dude Join Date: Feb 2008 Location: Pelham, AL iTrader: (3) Posts: 319 Rep Power: 17	Brian, Let me know if I can help you with those brackets. We laser cut and CNC press brake metal everyday here. Thos e brackets could be bolted in if you used a square frame and press brake the ends. We could even powder coat the assembly in house. If you want, let's talk more through PM. We have in-house CAD design as well. Todd B. (formerly NoLimitInd)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode