Middle TN - Thread

fire85gslse · 03-21-2010, 10:39 PM

Quote:

Originally Posted by lilring

Rear struts for the hatch

I think there are two of these on my work bench in the garage

RoughRex · 03-21-2010, 11:35 PM

Quote:

Originally Posted by My5ABaby

There's a few pimple thingies on the gauge hood, but otherwise it's good. All of the plastic is good except for 3 spots by the windshield. Two are where you screw the dash into the firewall (not really needed) and one is the left most clip to hold the defrost vent cover piece (the long piece under the windshield) on. You're in Antioch, right? I could run it by if you want and let you check it out.

Mine is riddled with sun damage "pimples" all over the gauge cluster hump and in front of the warning light surround. I'm in Smyrna off of hwy 24 exit 70, Almaville Rd.

FC Zach · 03-22-2010, 05:20 AM

Quote:

Originally Posted by lilring

Yeah.. its Tuesday the 23rd right? I will be coming in my gray RX8. The RX7 suspension is shoot so it doesnt move much

Yep, tomorrow @ 6p.m., Toots on Broad

My5ABaby · 03-22-2010, 09:14 AM

I might actually have the 7 at the meet for once. It's actually better at transporting parts than my 6. Can't really fit much in the 6 as far as bigger parts.

FerociousP · 03-22-2010, 09:23 AM

I'll be there in the SA if I get the axles back in and get the brakes done an bled on Tuesday (taking the day off). The left wheel bearing was growling pretty bad so I'm glad I'm doing it... and I have tunes!

My5ABaby · 03-22-2010, 09:33 AM

79 SA has tunes and I don't. I really need to work on this whole no radio thing. I need something to drown out my trannys whining.

FC Zach · 03-22-2010, 07:01 PM

To all you 2nd gen owners, I've always been curious but forget to ask whenever we meet up. Do your selections on the switch unit (such as the "head", "feet", "defrost", etc.) illuminate? I cant see the damn things at night to make the selections so I have to use the dome light to differentiate them.

My5ABaby · 03-22-2010, 07:30 PM

Quote:

Originally Posted by FC Zach

To all you 2nd gen owners, I've always been curious but forget to ask whenever we meet up. Do your selections on the switch unit (such as the "head", "feet", "defrost", etc.) illuminate? I cant see the damn things at night to make the selections so I have to use the dome light to differentiate them.

About 1/2 of mine work. I'm not sure if the lights are burned out or if the actual buttons don't work. I'll have to do some experimenting.

fire85gslse · 03-22-2010, 08:04 PM

Quote:

Originally Posted by FC Zach

To all you 2nd gen owners, I've always been curious but forget to ask whenever we meet up. Do your selections on the switch unit (such as the "head", "feet", "defrost", etc.) illuminate? I cant see the damn things at night to make the selections so I have to use the dome light to differentiate them.

all of mine worked in my white fc and my last black TII

RoughRex · 03-22-2010, 09:54 PM

Quote:

Originally Posted by 83Rx7

I will show up Tuesday. Zach,thanks for the drive shaft.
Anyone have these items they want to part with:
New Driveshaft seal-non turbo for 91vert
center air vent for 91vert
Drivers side electric window switch for 91 vert
Bring them with you if you want to part with them.
Thanks
Rich

I have a center air vent for S5 (Same vent for coupe and vert I think?) but one of the horizontal pieces is broken off and missing. I'll bring it tomorrow it's yours if you want it.

Quote:

Originally Posted by FC Zach

To all you 2nd gen owners, I've always been curious but forget to ask whenever we meet up. Do your selections on the switch unit (such as the "head", "feet", "defrost", etc.) illuminate? I cant see the damn things at night to make the selections so I have to use the dome light to differentiate them.

The bottom row where you select temp lights up on mine... most of the time. The top row where you select which vents you want air at, the lights are all out. I tried replacing the bulb but no luck. It's a candidate for the soldering iron if I ever get around to pulling it back out again... such a PITA.

See you all tomorrow!

FC Zach · 03-22-2010, 10:28 PM

Good to know that the lights in mine worked at one point in time, forever I actually thought it was designed that way.

"I tried replacing the bulb but no luck. It's a candidate for the soldering iron if I ever get around to pulling it back out again... such a PITA."

Now I just have to find out why there not working, I'll get on this possibly in the morn.

"About 1/2 of mine work. I'm not sure if the lights are burned out or if the actual buttons don't work. I'll have to do some experimenting."

Thats how my clock is, it works when it want to and I'm not sure if its the idiot light display, the connection in the back, or both? ? ? not a big enough problem for me to care enough about so I ignore that little issue.

RoughRex · 03-22-2010, 10:45 PM

Quote:

Originally Posted by FC Zach

Good to know that the lights in mine worked at one point in time, forever I actually thought it was designed that way.

"I tried replacing the bulb but no luck. It's a candidate for the soldering iron if I ever get around to pulling it back out again... such a PITA."

Now I just have to find out why there not working, I'll get on this possibly in the morn.

"About 1/2 of mine work. I'm not sure if the lights are burned out or if the actual buttons don't work. I'll have to do some experimenting."

Thats how my clock is, it works when it want to and I'm not sure if its the idiot light display, the connection in the back, or both? ? ? not a big enough problem for me to care enough about so I ignore that little issue.

The idiot light cluster issue is caused by cold soldering... I bought a "reman" from Icemark because I was too lazy to fix it myself. I'd be willing to bet the logicon suffers from the same issue. The buttons on mine light up it's the back lighting that shows which button is which that is out on mine.

fire85gslse · 03-23-2010, 06:19 AM

Quote:

Originally Posted by FC Zach

Good to know that the lights in mine worked at one point in time, forever I actually thought it was designed that way.

"I tried replacing the bulb but no luck. It's a candidate for the soldering iron if I ever get around to pulling it back out again... such a PITA."

Now I just have to find out why there not working, I'll get on this possibly in the morn.

"About 1/2 of mine work. I'm not sure if the lights are burned out or if the actual buttons don't work. I'll have to do some experimenting."

Thats how my clock is, it works when it want to and I'm not sure if its the idiot light display, the connection in the back, or both? ? ? not a big enough problem for me to care enough about so I ignore that little issue.

yep, it is the typical 2nd gen electrical issues. They all will have them at some point.

fire85gslse · 03-23-2010, 06:20 AM

Have fun tonight guys. Im in memphis and wish i could be there with the rx2

FC Zach · 03-23-2010, 08:04 AM

Quote:

Originally Posted by fire85gslse

Have fun tonight guys. Im in memphis and wish i could be there with the rx2

Chad, is that the old yellow one I used to have? Is it drivable yet? I was talkin about that car last night.

03-22-2010, 09:14 AM	#694
My5ABaby Sigh..... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (6) Posts: 2,377 Rep Power: 19	I might actually have the 7 at the meet for once. It's actually better at transporting parts than my 6. Can't really fit much in the 6 as far as bigger parts. __________________ 1986 Sport: 132k miles, 5A (Sapphire Blue Metallic), Tokico Blues, Racing Beat Springs, Custom LED tailights (only S4 LED tails in the world), SSR Mark II, Racing Beat exhaust, S5 black interior, Rotary Resurrection rebuild at 120k miles Community Service Manual RotorWiki "Imagination costs nothing; we could build square locomotives or fly to Mars" - Felix Wankel Yesterday is history, tomorrow is a mystery, but today is a gift. That is why it is called the "present."

03-22-2010, 09:23 AM	#695
FerociousP I-had-a-bad-experience... Join Date: Feb 2008 Location: M'boro iTrader: (2) Posts: 1,046 Rep Power: 18	I'll be there in the SA if I get the axles back in and get the brakes done an bled on Tuesday (taking the day off). The left wheel bearing was growling pretty bad so I'm glad I'm doing it... and I have tunes! __________________ '15 Juke Nismo '06 MX-5 GT SOLD '04 S Silver RX-8 GT Track Day Use SOLD '90 Black TII vert w/ Sprint RE stock port/turbo DD dyno (242.6whp@5500rpm @12psi 8psi@redline) and (250ftlbtq@4800rpm @13psi) SOLD '89 GTUs 6p TII SOLD, '87 sport SOLD, '79 SA stock SOLD '91 B2600i 4x4 w/ Rx-8 LSD SOLD

03-22-2010, 09:33 AM	#696
My5ABaby Sigh..... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (6) Posts: 2,377 Rep Power: 19	79 SA has tunes and I don't. I really need to work on this whole no radio thing. I need something to drown out my trannys whining. __________________ 1986 Sport: 132k miles, 5A (Sapphire Blue Metallic), Tokico Blues, Racing Beat Springs, Custom LED tailights (only S4 LED tails in the world), SSR Mark II, Racing Beat exhaust, S5 black interior, Rotary Resurrection rebuild at 120k miles Community Service Manual RotorWiki "Imagination costs nothing; we could build square locomotives or fly to Mars" - Felix Wankel Yesterday is history, tomorrow is a mystery, but today is a gift. That is why it is called the "present."

03-22-2010, 07:01 PM	#697
FC Zach RCC Loves Me Not You Join Date: Mar 2008 Location: Eagleville, TN iTrader: (2) Posts: 2,267 Rep Power: 19	HVAC switch illumination ? ? To all you 2nd gen owners, I've always been curious but forget to ask whenever we meet up. Do your selections on the switch unit (such as the "head", "feet", "defrost", etc.) illuminate? I cant see the damn things at night to make the selections so I have to use the dome light to differentiate them. __________________ 1993 Yamaha GTS1000 1992 Celica Turbo AllTrac 1987 RX7 Sport 1979 Yamaha G1, KM24 powered 1975 Dolmar KMS4

03-22-2010, 10:28 PM	#701
FC Zach RCC Loves Me Not You Join Date: Mar 2008 Location: Eagleville, TN iTrader: (2) Posts: 2,267 Rep Power: 19	Good to know that the lights in mine worked at one point in time, forever I actually thought it was designed that way. "I tried replacing the bulb but no luck. It's a candidate for the soldering iron if I ever get around to pulling it back out again... such a PITA." Now I just have to find out why there not working, I'll get on this possibly in the morn. "About 1/2 of mine work. I'm not sure if the lights are burned out or if the actual buttons don't work. I'll have to do some experimenting." Thats how my clock is, it works when it want to and I'm not sure if its the idiot light display, the connection in the back, or both? ? ? not a big enough problem for me to care enough about so I ignore that little issue. __________________ 1993 Yamaha GTS1000 1992 Celica Turbo AllTrac 1987 RX7 Sport 1979 Yamaha G1, KM24 powered 1975 Dolmar KMS4

03-23-2010, 06:20 AM	#704
fire85gslse RCC Addict Join Date: Feb 2008 Location: Middle TN iTrader: (0) Posts: 1,029 Rep Power: 18	Have fun tonight guys. Im in memphis and wish i could be there with the rx2 __________________ I own A few Rotaries and Yes, I have a rotary problem. (SELLING OFF All my parts) 79SA(Respeed Car),93 FD (tweakit)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode