93 BB base FD build-up

ACowden20 · 04-13-2008, 10:28 PM

Another picture of Dan hard at work:

Actually, I have to thank Dan for allowing me to borrow some tools and floor space while pulling the head on my MR2 Turbo. What ever he says about me holding up his progress is wrong

Chadwick · 04-13-2008, 10:55 PM

Quote:

Originally Posted by ACowden20

Another picture of Dan hard at work:

Actually, I have to thank Dan for allowing me to borrow some tools and floor space while pulling the head on my MR2 Turbo. What ever he says about me holding up his progress is 100% correct,

Fixed that for you!

Dan

sbrian2 · 04-14-2008, 07:13 PM

Hey, I just found where you can pull about 30 lbs from the car.

Chadwick · 04-14-2008, 11:10 PM

Quote:

Originally Posted by sbrian2

Hey, I just found where you can pull about 30 lbs from the car.

Take off one of the turbos?

Chadwick · 04-21-2008, 12:14 AM

Added a few more pictures of the motor installed and other misc. parts.

Dan

Brent · 04-21-2008, 02:08 AM

I was wondering if you had finished it. I just finished looking on the tr site to see if you raced but didn't see you. However, one of my soldiers that is here with me in Afghanistan apparently raced in Nashville yesterday according to the results on the website... lol.

Chadwick · 04-21-2008, 11:09 AM

Quote:

Originally Posted by Brent

I was wondering if you had finished it. I just finished looking on the tr site to see if you raced but didn't see you. However, one of my soldiers that is here with me in Afghanistan apparently raced in Nashville yesterday according to the results on the website... lol.

Now that is a long haul to get back and race

!

fire85gslse · 04-27-2008, 11:13 PM

Dan, can't wait to see her on the track. Everything looking good. See ya Tuesday.
Chad

Chadwick · 04-27-2008, 11:18 PM

First and second post update with a bunch more pictures.

We started the car today and it is purring like a kitten but we did have a little drama getting there.

Yesterday we buttoned everything up and started to fill her with fluids. When she got about ¾ full of water a small leak was apparent. It looked to be coming from the coolant supply hose to the turbo. We took off the hose, inspected it and the fitting then re-clamped it. To our surprise it was leaking even worse. That is when we noticed the water was coming out of the fitting that is pressed into the water pump housing, not the hose

. We had to tear everything back off the front of the motor and replace the housing. While Brian, Andrew and I worked on getting everything back together, Mike polished the crap out of my Greddy Elbow and intercooler

.

With the water leak fixed Brian wired up the FJO injector driver and I wired up the Jacobs and we were ready to turn the key. Brian cranked her for about 6 seconds and she started to fire but he had already committed to releasing the key. He hit it again and she fired on the second crank. Right from the start she idled super smooth and only kicked out smoke for around 5 minutes. Andrew and I adjusted the fuel pressure and we let her get up to temp watching for any leaks the whole time. That is when we noticed a mist of what we thought was water coming from somewhere on the front of the engine. It was being slung by the belts and making a mist so it was really hard to tell where it was coming from. I had Brian kill the engine.

With the engine off it became obvious that it was not water but oil that was being slung and we could see right where it was coming from, the front bolt on the eccentric shaft.

Brian and Andrew pulled the piping and intercooler and we removed the bolt to find the crush washer had shifted when it was torque down. I promptly threw the crush washer in the trash. Brian applied a layer of RTV to the bolt and we reinstalled it.

We installed all the plumping back and fired her up for the second time. Maybe 2 or 3 cranks and she fired right up, this time with no leaks. We let her run for about 30 minutes and check all the pressures and temps. She is pulling 16-18 of vacuum at idle which is great for having all new seals and running for less than an hour total.

We all seem to think she has a deeper tone then before with a little stronger pop to the exhaust pulses.

Hopefully we can get everything else button down this week and get her on the dyno next weekend.

Stay tuned,

Dan

Brent · 04-28-2008, 09:34 AM

are you using stock or 99spec turbo's? Man, I wish I was around to see it! You done anything with the carputer?

sbrian2 · 04-28-2008, 11:44 AM

They are 99spec. It was a frustrating weekend at times, but the payoff was worth the trouble. I told Dan we couldn't go home this weekend until it was running, so we accomplished our goal.

ACowden20 · 04-29-2008, 10:32 PM

I think we all felt a little defeated after the water leak on Saturday. Well that and when we found I had "forgot" to hook up the fuel pump after I installed it a few months ago.

fire85gslse · 04-29-2008, 10:52 PM

Dan, thanks for the help tonight. It was good to see you all.
Chad

Garfinkles Motor Works · 04-30-2008, 08:27 AM

I just saw this thread ,with all that torque you will need a garfinkle engine torque brace and a garfinkle oil pan brace for sure . Have you seen the garfinkle belt idler ,it is as nice as yours .

Chadwick · 04-30-2008, 09:44 AM

Quote:

Originally Posted by Brent

are you using stock or 99spec turbo's? Man, I wish I was around to see it! You done anything with the carputer?

As Brian said, yes to the 99's. Wish you were around too, we will have some fun when you get back state side. We are currently working on the inside wiring (wideband, Dual EGT, Datalogit and Carputer) so I should have an update in a couple of days. We were going to work on some of it last night but ran into a high idle issue and a sensor not working. Resolved both of those so it is back onto the wiring.

Quote:

Originally Posted by ACowden20

I think we all felt a little defeated after the water leak on Saturday. Well that and when we found I had "forgot" to hook up the fuel pump after I installed it a few months ago.

You didn't forget, you were just testing our diagnostic skills

Quote:

Originally Posted by fire85gslse

Dan, thanks for the help tonight. It was good to see you all.
Chad

No problem, stop by anytime, just stay away from my 99 bumper

Quote:

Originally Posted by Garfinkles Motor Works

I just saw this thread ,with all that torque you will need a garfinkle engine torque brace and a garfinkle oil pan brace for sure . Have you seen the garfinkle belt idler ,it is as nice as yours .

Oil pan brace is already on and we should be installing the torque brace this weekend. Like everything else you make your airpump delete idler pulley is a work of art. We just took two different paths to achieve the same goal.

Dan

04-14-2008, 07:13 PM	#48
sbrian2 Rotary Wannabee Join Date: Mar 2008 Location: M'boro TN iTrader: (0) Posts: 50 Rep Power: 17	Hey, I just found where you can pull about 30 lbs from the car. __________________ -Brian '95 Mazda Miata R package '90 Mazda Miata turbo '06 Chevrolet Trailblazer SS '01 BMW 325Ci '91 Honda CRX hf

04-21-2008, 12:14 AM	#50
Chadwick Rotary Fanatic Join Date: Feb 2008 Location: Smyrna, TN, USA iTrader: (3) Posts: 239 Rep Power: 17	Added a few more pictures of the motor installed and other misc. parts. Dan __________________ 93 RX7 BB (Race Car) 93 RX7 SSM (Soon to be IBM and a daily driver) 05 Silverado Z71 08 Mini Cooper 80 LS RX7 (for sale)

04-21-2008, 02:08 AM	#51
Brent Sua Sponte Join Date: Feb 2008 Location: Killeen, TX iTrader: (4) Posts: 839 Rep Power: 17	I was wondering if you had finished it. I just finished looking on the tr site to see if you raced but didn't see you. However, one of my soldiers that is here with me in Afghanistan apparently raced in Nashville yesterday according to the results on the website... lol. __________________ Road Atlanta August 2011 NASA TT 1:33 http://www.youtube.com/watch?v=IFY00PAK_Ps Traqmate's video of my car from the 2011 UTCC at VIR http://www.youtube.com/watch?v=2Zcn6...layer_embedded Video of Yellow LS1 FD at NASA TT at VIR http://www.youtube.com/watch?v=e6k0lJkcwrM

04-27-2008, 11:13 PM	#53
fire85gslse RCC Addict Join Date: Feb 2008 Location: Middle TN iTrader: (0) Posts: 1,029 Rep Power: 18	Dan, can't wait to see her on the track. Everything looking good. See ya Tuesday. Chad __________________ I own A few Rotaries and Yes, I have a rotary problem. (SELLING OFF All my parts) 79SA(Respeed Car),93 FD (tweakit)

04-27-2008, 11:18 PM	#54
Chadwick Rotary Fanatic Join Date: Feb 2008 Location: Smyrna, TN, USA iTrader: (3) Posts: 239 Rep Power: 17	First and second post update with a bunch more pictures. We started the car today and it is purring like a kitten but we did have a little drama getting there. Yesterday we buttoned everything up and started to fill her with fluids. When she got about ¾ full of water a small leak was apparent. It looked to be coming from the coolant supply hose to the turbo. We took off the hose, inspected it and the fitting then re-clamped it. To our surprise it was leaking even worse. That is when we noticed the water was coming out of the fitting that is pressed into the water pump housing, not the hose. We had to tear everything back off the front of the motor and replace the housing. While Brian, Andrew and I worked on getting everything back together, Mike polished the crap out of my Greddy Elbow and intercooler . With the water leak fixed Brian wired up the FJO injector driver and I wired up the Jacobs and we were ready to turn the key. Brian cranked her for about 6 seconds and she started to fire but he had already committed to releasing the key. He hit it again and she fired on the second crank. Right from the start she idled super smooth and only kicked out smoke for around 5 minutes. Andrew and I adjusted the fuel pressure and we let her get up to temp watching for any leaks the whole time. That is when we noticed a mist of what we thought was water coming from somewhere on the front of the engine. It was being slung by the belts and making a mist so it was really hard to tell where it was coming from. I had Brian kill the engine. With the engine off it became obvious that it was not water but oil that was being slung and we could see right where it was coming from, the front bolt on the eccentric shaft. Brian and Andrew pulled the piping and intercooler and we removed the bolt to find the crush washer had shifted when it was torque down. I promptly threw the crush washer in the trash. Brian applied a layer of RTV to the bolt and we reinstalled it. We installed all the plumping back and fired her up for the second time. Maybe 2 or 3 cranks and she fired right up, this time with no leaks. We let her run for about 30 minutes and check all the pressures and temps. She is pulling 16-18 of vacuum at idle which is great for having all new seals and running for less than an hour total. We all seem to think she has a deeper tone then before with a little stronger pop to the exhaust pulses. Hopefully we can get everything else button down this week and get her on the dyno next weekend. Stay tuned, Dan __________________ 93 RX7 BB (Race Car) 93 RX7 SSM (Soon to be IBM and a daily driver) 05 Silverado Z71 08 Mini Cooper 80 LS RX7 (for sale)

04-13-2008, 10:28 PM	#46
ACowden20 The Newbie Join Date: Mar 2008 iTrader: (0) Posts: 11 Rep Power: 0	Another picture of Dan hard at work: Actually, I have to thank Dan for allowing me to borrow some tools and floor space while pulling the head on my MR2 Turbo. What ever he says about me holding up his progress is wrong

04-28-2008, 09:34 AM	#55
Brent Sua Sponte Join Date: Feb 2008 Location: Killeen, TX iTrader: (4) Posts: 839 Rep Power: 17	are you using stock or 99spec turbo's? Man, I wish I was around to see it! You done anything with the carputer? __________________ Road Atlanta August 2011 NASA TT 1:33 http://www.youtube.com/watch?v=IFY00PAK_Ps Traqmate's video of my car from the 2011 UTCC at VIR http://www.youtube.com/watch?v=2Zcn6...layer_embedded Video of Yellow LS1 FD at NASA TT at VIR http://www.youtube.com/watch?v=e6k0lJkcwrM

04-28-2008, 11:44 AM	#56
sbrian2 Rotary Wannabee Join Date: Mar 2008 Location: M'boro TN iTrader: (0) Posts: 50 Rep Power: 17	They are 99spec. It was a frustrating weekend at times, but the payoff was worth the trouble. I told Dan we couldn't go home this weekend until it was running, so we accomplished our goal. __________________ -Brian '95 Mazda Miata R package '90 Mazda Miata turbo '06 Chevrolet Trailblazer SS '01 BMW 325Ci '91 Honda CRX hf

04-29-2008, 10:32 PM	#57
ACowden20 The Newbie Join Date: Mar 2008 iTrader: (0) Posts: 11 Rep Power: 0	I think we all felt a little defeated after the water leak on Saturday. Well that and when we found I had "forgot" to hook up the fuel pump after I installed it a few months ago.

04-29-2008, 10:52 PM	#58
fire85gslse RCC Addict Join Date: Feb 2008 Location: Middle TN iTrader: (0) Posts: 1,029 Rep Power: 18	Dan, thanks for the help tonight. It was good to see you all. Chad __________________ I own A few Rotaries and Yes, I have a rotary problem. (SELLING OFF All my parts) 79SA(Respeed Car),93 FD (tweakit)

04-30-2008, 08:27 AM	#59
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 iTrader: (11) Posts: 535 Rep Power: 17	I just saw this thread ,with all that torque you will need a garfinkle engine torque brace and a garfinkle oil pan brace for sure . Have you seen the garfinkle belt idler ,it is as nice as yours .

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode