The officially Official: To-Do List Thread DGRR 2014 Edition

***TitaniumTT*** · 01-23-2014, 11:03 AM

I like Magnaflows, but you need to run an offset design to get any real noise reduction. My favorite muffler is a turbo though

rx7 vinnie · 01-23-2014, 12:01 PM

I'll probably get another 3" Magna-flow and a turn down tip..... They look like limp dicks.

chibikougan · 01-23-2014, 01:44 PM

Supertrapp!

reddozen · 01-23-2014, 02:42 PM

Must do:
- Fix door handle and key fob
- Replace split airbag cover
- Replace console cover
- Relocate battery
- Relocate and replace overflow tank with aluminum tank
- Make tray replacement for radiator flow where battery and air box were.
- Rotate tires left to right (stupid staggered wheels)
- Replace steering rack
- Alignment

Money Dependent:
- Misc PDR dents
- Address clear coat / paint issues
- Replace front fenders
- Finial tune on the Bridge Port

Boredom:
- Wire tuck

85rx-7gsl-se · 01-23-2014, 03:01 PM

I think the lack of turbo is what makes Vinnies car so loud lol

rx7 vinnie · 01-23-2014, 03:08 PM

Meh...pop the hood and see a Weber people be like WAT?

***TitaniumTT*** · 01-23-2014, 03:17 PM

Pop any hood and most people be like WAT???

rx7 vinnie · 01-23-2014, 03:46 PM

Love how we derailed this thread!

***TitaniumTT*** · 01-23-2014, 09:57 PM

I tried... I tried to keep it on track.... Actually did some work on the 8 tonight... more tomorrow and maybe...just maybe by the end of the weekend she'll be done and in storage...

GySgtFrank · 01-23-2014, 10:25 PM

Quote:

Originally Posted by TitaniumTT

I tried... I tried to keep it on track.... Actually did some work on the 8 tonight... more tomorrow and maybe...just maybe by the end of the weekend she'll be done and in storage...

Just don't store it next to the FC, it's liable to get Christine'd.

Still lots to do on mine. Need to get the rest of the shock mounts and lower cradle done so I can reinstall the drivetrain, et al. Running out of time.

djmtsu · 01-24-2014, 06:57 AM

Still waiting on parts for the Cosmo. Delivery from Atkins should be here today.

If only the temperature would come up a little. Cold steel hurts on my fragile hands.

reddozen · 01-24-2014, 08:25 AM

Quote:

Originally Posted by djmtsu

Still waiting on parts for the Cosmo. Delivery from Atkins should be here today.

If only the temperature would come up a little. Cold steel hurts on my fragile hands.

Supposed to be 42 Saturday and 51 Sunday. I have to work on Tucker's car Sunday. His new struts, and cat wont be in till Tuesday. We'll get the throwout bearing replaced though.

fc nut · 01-30-2014, 04:54 PM

this will be my 1st year attending and i look forward to meeting everyone. my t2 (francene) will be making the journey.

chibikougan · 01-30-2014, 05:23 PM

Gwar!

Rx7Spaz · 02-20-2014, 04:31 AM

Working a lot of overtime lately and saving money for a haltech re for 91 rx7 with a turbo swap. If I can find a built rew for my 93 rx7 in time I'd rather be working on that. Hoping to make it with a rotary this year!

01-23-2014, 11:03 AM	#46
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	I like Magnaflows, but you need to run an offset design to get any real noise reduction. My favorite muffler is a turbo though __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

01-23-2014, 12:01 PM	#47
rx7 vinnie I SEE DEAD PEOPLE Join Date: Mar 2008 Location: nashville, tn (antioch) iTrader: (0) Posts: 743 Rep Power: 17	I'll probably get another 3" Magna-flow and a turn down tip..... They look like limp dicks. __________________ VIN-AUTO Rotary list of Fails below: 86 mazda rx7 csp 61 N/A= because RACECAR 87 mazda rx7 t2 with 13b-re cosmo GT42= FKN RUNS!!! 03 Dodge Viper SRT-10 Vert 06 dodge ram 2500 Megacab turbo Cummins=puller 16 MB ML350

01-23-2014, 02:42 PM	#49
reddozen Gold Wheels FTW Join Date: Mar 2008 iTrader: (0) Posts: 744 Rep Power: 17	Must do: - Fix door handle and key fob - Replace split airbag cover - Replace console cover - Relocate battery - Relocate and replace overflow tank with aluminum tank - Make tray replacement for radiator flow where battery and air box were. - Rotate tires left to right (stupid staggered wheels) - Replace steering rack - Alignment Money Dependent: - Misc PDR dents - Address clear coat / paint issues - Replace front fenders - Finial tune on the Bridge Port Boredom: - Wire tuck __________________ My Cars: 1974 RX4 Coupe 1991 FC3S RX7 - Sold 2003 ZZW30 MR2 (Rotary swap after RX8) 2004 SE3P RX8 (20B Swap in the works)

01-23-2014, 03:08 PM	#51
rx7 vinnie I SEE DEAD PEOPLE Join Date: Mar 2008 Location: nashville, tn (antioch) iTrader: (0) Posts: 743 Rep Power: 17	Meh...pop the hood and see a Weber people be like WAT? __________________ VIN-AUTO Rotary list of Fails below: 86 mazda rx7 csp 61 N/A= because RACECAR 87 mazda rx7 t2 with 13b-re cosmo GT42= FKN RUNS!!! 03 Dodge Viper SRT-10 Vert 06 dodge ram 2500 Megacab turbo Cummins=puller 16 MB ML350

01-23-2014, 03:17 PM	#52
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Pop any hood and most people be like WAT??? __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

01-23-2014, 03:46 PM	#53
rx7 vinnie I SEE DEAD PEOPLE Join Date: Mar 2008 Location: nashville, tn (antioch) iTrader: (0) Posts: 743 Rep Power: 17	Love how we derailed this thread! __________________ VIN-AUTO Rotary list of Fails below: 86 mazda rx7 csp 61 N/A= because RACECAR 87 mazda rx7 t2 with 13b-re cosmo GT42= FKN RUNS!!! 03 Dodge Viper SRT-10 Vert 06 dodge ram 2500 Megacab turbo Cummins=puller 16 MB ML350

01-23-2014, 09:57 PM	#54
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	I tried... I tried to keep it on track.... Actually did some work on the 8 tonight... more tomorrow and maybe...just maybe by the end of the weekend she'll be done and in storage... __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

01-24-2014, 06:57 AM	#56
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (10) Posts: 4,043 Rep Power: 21	Still waiting on parts for the Cosmo. Delivery from Atkins should be here today. If only the temperature would come up a little. Cold steel hurts on my fragile hands. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

01-30-2014, 04:54 PM	#58
fc nut member Join Date: Jun 2008 Location: Lebanon,Ohio iTrader: (0) Posts: 282 Rep Power: 17	this will be my 1st year attending and i look forward to meeting everyone. my t2 (francene) will be making the journey. __________________ leaving my carbon footprint....one start up at a time

02-20-2014, 04:31 AM	#60
Rx7Spaz Spirit II in Progress Join Date: Apr 2011 Location: Washington, MO iTrader: (0) Posts: 40 Rep Power: 0	Working a lot of overtime lately and saving money for a haltech re for 91 rx7 with a turbo swap. If I can find a built rew for my 93 rx7 in time I'd rather be working on that. Hoping to make it with a rotary this year! __________________ ~1991 Rx7 - Spirit II - Finishing a Turbo swap for DGRR 2013 ~1993 Rx7 Touring - Sharyn - Currently awaiting rebuild ~1987 Rx7 My 1st Rotary - Faygo - R.I.P. Driving Rotary since 2003

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode