My latest build. S475 etc

N.RotaryTech · 03-20-2009, 06:29 AM

"On a rotary, its not a turbo if it ain't the same size or bigger than the motor."

dregg100 · 03-20-2009, 09:00 PM

hell yes!

dregg100 · 03-23-2009, 09:42 AM

a small update. the downpipe and wastegate tubes are tacked up. getting fully tigged today and shipped back tomorrow!! here are a few cell phone pics from charlie.

charlies7 · 03-23-2009, 12:53 PM

Wow, my cell phone camera did a good job suprisingly.

sk8world · 03-23-2009, 02:20 PM

better get some heat shielding on that LIM!

85rx-7gsl-se · 03-23-2009, 02:54 PM

^You know like 500degree intake temps?

charlies7 · 03-23-2009, 05:55 PM

Quote:

Originally Posted by sk8world

better get some heat shielding on that LIM!

Quote:

Originally Posted by 85rx-7gsl-se

^You know like 500degree intake temps?

Everything related to the exhaust is going to be ceramic coated. I know it looks like the DP is right on the LIM but it really isnt as bad as it looks. Idea was to keep the transition from the 5" to 4" as long as possible. The LIM is also ceramic coated as a thermal barrier.

However, I bet this kit will out perform many other out there.

Boost creep should be non-exsistant and the T6 flange has a very nice transition for flow, thanks to the help from a CNC.

To bad no one can see the machine work, maybe thats a good thing.

FreeLance · 03-23-2009, 10:26 PM

Good craftsmanship Charlie! There's no holes between the tubing so that shows precise and thought-out planning. Should be a killer setup

dregg100 · 03-24-2009, 12:34 AM

the dp is also going to have header wrap on it and i may even put some of that DEI thermal barrier on the LIM to further protect it. we shall see.

dregg100 · 03-27-2009, 07:36 PM

well boys a small peek at a an upcoming update. i got everything back from charlie today and it is beautiful!! here are some pics of the dp. i took it all to get ceramic coated this morning and will have it all back tomorrow afternoon or sunday morning. then it will be all put on the car and a ton of pics taken. here it is!

check out these welds

charlies7 · 03-28-2009, 12:26 AM

Lookin good Masin..

Need a 4" turbo back

dregg100 · 03-28-2009, 10:30 AM

that will be done soon!!

classicauto · 03-28-2009, 11:25 AM

Thats some bitchin fab on the downpipe, awesome work!

[borat]vury nice![/borat]

prrex4ever · 03-28-2009, 03:54 PM

That is some awesome work!

dregg100 · 03-28-2009, 05:10 PM

if you guys need/want any of the stuff above pm me or charlie(charlies7) and we can put together a kit for you.

03-20-2009, 06:29 AM	#31
N.RotaryTech Home-brew Rotary Join Date: Feb 2008 Location: GooseCreek SC iTrader: (0) Posts: 552 Rep Power: 17	"On a rotary, its not a turbo if it ain't the same size or bigger than the motor." __________________ '89 RX7 GTU, half-Bridge-port S4/S5 NA, E6K, Full RB exhaust, weekend warrior. '83 RX7, The "this might take awhile" project. '87 RX7 GXL, Rest In Pieces. '98 Subaru Impreza Outback-sport, rx7 rescue vehicle, down for repair. '94 Ford Ranger, daily.

03-20-2009, 09:00 PM	#32
dregg100 Rotary Fanatic Join Date: Feb 2008 iTrader: (2) Posts: 432 Rep Power: 17	hell yes! __________________ '93 SSM Touring-S475... '87 Tii-LS1/T56

03-23-2009, 09:42 AM	#33
dregg100 Rotary Fanatic Join Date: Feb 2008 iTrader: (2) Posts: 432 Rep Power: 17	a small update. the downpipe and wastegate tubes are tacked up. getting fully tigged today and shipped back tomorrow!! here are a few cell phone pics from charlie. __________________ '93 SSM Touring-S475... '87 Tii-LS1/T56

03-23-2009, 02:20 PM	#35
sk8world 600rwhp club member. Join Date: Mar 2008 iTrader: (2) Posts: 551 Rep Power: 17	better get some heat shielding on that LIM! __________________ 6.? @ 11? drag pass http://www.youtube.com/watch?v=9wfxT2RMr7c

03-24-2009, 12:34 AM	#39
dregg100 Rotary Fanatic Join Date: Feb 2008 iTrader: (2) Posts: 432 Rep Power: 17	the dp is also going to have header wrap on it and i may even put some of that DEI thermal barrier on the LIM to further protect it. we shall see. __________________ '93 SSM Touring-S475... '87 Tii-LS1/T56

03-23-2009, 12:53 PM	#34
charlies7 one broke moderator Join Date: Feb 2008 Location: Chicago iTrader: (2) Posts: 319 Rep Power: 17	Wow, my cell phone camera did a good job suprisingly.

03-23-2009, 10:26 PM	#38
FreeLance The Newbie Join Date: Mar 2008 Location: New York iTrader: (0) Posts: 27 Rep Power: 0	Good craftsmanship Charlie! There's no holes between the tubing so that shows precise and thought-out planning. Should be a killer setup

03-27-2009, 07:36 PM	#40
dregg100 Rotary Fanatic Join Date: Feb 2008 iTrader: (2) Posts: 432 Rep Power: 17	well boys a small peek at a an upcoming update. i got everything back from charlie today and it is beautiful!! here are some pics of the dp. i took it all to get ceramic coated this morning and will have it all back tomorrow afternoon or sunday morning. then it will be all put on the car and a ton of pics taken. here it is! check out these welds __________________ '93 SSM Touring-S475... '87 Tii-LS1/T56

03-28-2009, 12:26 AM	#41
charlies7 one broke moderator Join Date: Feb 2008 Location: Chicago iTrader: (2) Posts: 319 Rep Power: 17	Lookin good Masin.. Need a 4" turbo back

03-28-2009, 10:30 AM	#42
dregg100 Rotary Fanatic Join Date: Feb 2008 iTrader: (2) Posts: 432 Rep Power: 17	that will be done soon!! __________________ '93 SSM Touring-S475... '87 Tii-LS1/T56

03-28-2009, 03:54 PM	#44
prrex4ever Rotary Fanatic Join Date: Oct 2008 iTrader: (1) Posts: 274 Rep Power: 17	That is some awesome work!

03-28-2009, 05:10 PM	#45
dregg100 Rotary Fanatic Join Date: Feb 2008 iTrader: (2) Posts: 432 Rep Power: 17	if you guys need/want any of the stuff above pm me or charlie(charlies7) and we can put together a kit for you. __________________ '93 SSM Touring-S475... '87 Tii-LS1/T56

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode