GZ LIM group buy

silverfd3s · 03-09-2008, 12:51 PM

i def want the manifold not polished but whats the price on the fuel rail?
Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3. Max_Spd (Not Polished)
4. Charlies7
5. speedjunkie (not polished)
6. Railgun (unpolished)
7. Brent (not polished)
8. 13bmaniac (not polished)
9. silverfd3s ( not polished)
Oil Pan:
1.proz07
2.d33 (Danny)
3.

Fuel Rails
1.proz07 (4 port)
2.silverfd3s (matching rail for manifold)depending price
3.

glenrx7 · 03-09-2008, 02:01 PM

Hey all looking good, I will get prices on the rail for all that need one. Should be monday.

treceb · 03-09-2008, 07:44 PM

...

Quote:

Originally Posted by treceb

does their fuel rail provide a location for the fuel temp sensor? or is it like a KG rail but for 4 injectors instead of 2?

glenrx7 · 03-09-2008, 08:30 PM

Quote:

Originally Posted by treceb

...

Oh sorry I missed that. I will find out I think you can get it with or without.

Last one we had did not have a place for the sensor so we drilled and tapped for it .

Chadwick · 03-11-2008, 10:59 AM

Quote:

Originally Posted by glenrx7

Hey all looking good, I will get prices on the rail for all that need one. Should be monday.

Any word?

Thanks,
Dan

13bmaniac · 03-11-2008, 11:59 PM

hey whats goin on here is the gb cooling off or what i think some of us need that lim ASAP

just toknow what are the latest updates

glenrx7 · 03-12-2008, 01:22 AM

Well looks like Xessesive has a few more to get from the foundry and they will have enough to cover this group buy. Should be next week we can start shipping. So lets get are names up here quick

Rails are going to be 240.00

Sorry guys and gals I dont get a great deal on these and I am there dealer...I think they pay alot for the extrution.

I also dropped the ball and forgot to ask about the sensor bung in the rail...sorry again I am only humna

joe-c · 03-12-2008, 03:54 AM

im real interested

fritts · 03-12-2008, 10:11 AM

Have there been any dynos back to back to show what increases in HP this gives. Equalizing the flow between the front and rear rotor is always benefit but I can clean those AFR's up with my ecu. I'm just wondering if the LIM is really the restriction in the stock setup.

charlies7 · 03-12-2008, 11:24 AM

I dont see why not..The LIM is equal flow and has larger runners. More fresh air to the rear cant hurt.

fritts · 03-12-2008, 11:34 AM

My question is whether the UIM and TB could be more of a restriction than the LIM. Don't get me wrong I like what it does but it may not be the best bang for the buck wise, which is why I was wanting to see if anyone had dyno'd it against a stocker.

13bmaniac · 03-13-2008, 01:18 AM

hello my friends i dont know if anibody here that plans to run the xcessive lim has a t51rkai turbo kit because this kit only works with the jdm LIm i dont know if there its going to be some fitment issues there... hey glen if you talk to these guys please ask him, if i have time iwill give him a call but f you remnber iwill apreciate the help...

proz07 · 03-13-2008, 04:02 PM

removed my name from the oil pan i ended up getting the one from charlie7 instead. but i still want the fuel rail
any updates?
z

Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3. Max_Spd (Not Polished)
4. Charlies7
5. speedjunkie (not polished)
6. Railgun (unpolished)
7. Brent (not polished)
8. 13bmaniac (not polished)
9. silverfd3s ( not polished)

Oil Pan:
1.d33 (Danny)
2.
3.

Fuel Rails
1.proz07 (4 port)
2.silverfd3s (matching rail for manifold)depending price
3.

Max_Spd · 03-15-2008, 08:36 AM

Ok so lets get this thing expedited

PS if anyone wants i have my 95/JDM LIM for sale

which has no EGR and all block off plates installed...

letsgo7 · 03-16-2008, 02:00 AM

hi, my first post... i was refered from RX7club.com about this group buy... interested but i would like to know how much of a price break we are getting.

thanks

-joe

p.s. I'm 90% in... let me know by email if possible when the money is needed... thank you

03-12-2008, 03:54 AM	#38
joe-c The Newbie Join Date: Mar 2008 iTrader: (0) Posts: 11 Rep Power: 0	im real interested Last edited by joe-c; 03-12-2008 at 03:56 AM..

03-12-2008, 10:11 AM	#39
fritts The Newbie Join Date: Feb 2008 Location: Ossian, In iTrader: (0) Posts: 25 Rep Power: 0	Have there been any dynos back to back to show what increases in HP this gives. Equalizing the flow between the front and rear rotor is always benefit but I can clean those AFR's up with my ecu. I'm just wondering if the LIM is really the restriction in the stock setup. __________________ 1993 RX-7 E85 WWW.DESIGNENGINEERINGWORKS.COM V-Mount Kits, Toe Hooks, Bumper Panels, Coil Relocation kits, Haltech Dealer.

03-12-2008, 11:34 AM	#41
fritts The Newbie Join Date: Feb 2008 Location: Ossian, In iTrader: (0) Posts: 25 Rep Power: 0	My question is whether the UIM and TB could be more of a restriction than the LIM. Don't get me wrong I like what it does but it may not be the best bang for the buck wise, which is why I was wanting to see if anyone had dyno'd it against a stocker. __________________ 1993 RX-7 E85 WWW.DESIGNENGINEERINGWORKS.COM V-Mount Kits, Toe Hooks, Bumper Panels, Coil Relocation kits, Haltech Dealer.

03-16-2008, 02:00 AM	#45
letsgo7 The Newbie Join Date: Mar 2008 iTrader: (0) Posts: 17 Rep Power: 0	hi, my first post... i was refered from RX7club.com about this group buy... interested but i would like to know how much of a price break we are getting. thanks -joe p.s. I'm 90% in... let me know by email if possible when the money is needed... thank you Last edited by letsgo7; 03-16-2008 at 02:11 AM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-09-2008, 12:51 PM	#31
silverfd3s The Newbie Join Date: Mar 2008 Location: Dela-where? iTrader: (0) Posts: 25 Rep Power: 0	i def want the manifold not polished but whats the price on the fuel rail? Manifolds: 1. KaiFD3S ( Not Polished ) 2. ryan1 ( not polished) 3. Max_Spd (Not Polished) 4. Charlies7 5. speedjunkie (not polished) 6. Railgun (unpolished) 7. Brent (not polished) 8. 13bmaniac (not polished) 9. silverfd3s ( not polished) Oil Pan: 1.proz07 2.d33 (Danny) 3. Fuel Rails 1.proz07 (4 port) 2.silverfd3s (matching rail for manifold)depending price 3.

03-09-2008, 02:01 PM	#32
glenrx7 Rotary Fanatic Join Date: Feb 2008 Location: Arizona iTrader: (5) Posts: 199 Rep Power: 17	Hey all looking good, I will get prices on the rail for all that need one. Should be monday.

03-11-2008, 11:59 PM	#36
13bmaniac Rotary Fan in Training Join Date: Mar 2008 iTrader: (0) Posts: 57 Rep Power: 17	hey whats goin on here is the gb cooling off or what i think some of us need that lim ASAP just toknow what are the latest updates

03-12-2008, 01:22 AM	#37
glenrx7 Rotary Fanatic Join Date: Feb 2008 Location: Arizona iTrader: (5) Posts: 199 Rep Power: 17	Well looks like Xessesive has a few more to get from the foundry and they will have enough to cover this group buy. Should be next week we can start shipping. So lets get are names up here quick Rails are going to be 240.00 Sorry guys and gals I dont get a great deal on these and I am there dealer...I think they pay alot for the extrution. I also dropped the ball and forgot to ask about the sensor bung in the rail...sorry again I am only humna

03-12-2008, 11:24 AM	#40
charlies7 one broke moderator Join Date: Feb 2008 Location: Chicago iTrader: (2) Posts: 319 Rep Power: 17	I dont see why not..The LIM is equal flow and has larger runners. More fresh air to the rear cant hurt.

03-13-2008, 01:18 AM	#42
13bmaniac Rotary Fan in Training Join Date: Mar 2008 iTrader: (0) Posts: 57 Rep Power: 17	hello my friends i dont know if anibody here that plans to run the xcessive lim has a t51rkai turbo kit because this kit only works with the jdm LIm i dont know if there its going to be some fitment issues there... hey glen if you talk to these guys please ask him, if i have time iwill give him a call but f you remnber iwill apreciate the help...

03-13-2008, 04:02 PM	#43
proz07 Needing a new tow rig. Join Date: Mar 2008 Location: AR iTrader: (0) Posts: 245 Rep Power: 17	removed my name from the oil pan i ended up getting the one from charlie7 instead. but i still want the fuel rail any updates? z Manifolds: 1. KaiFD3S ( Not Polished ) 2. ryan1 ( not polished) 3. Max_Spd (Not Polished) 4. Charlies7 5. speedjunkie (not polished) 6. Railgun (unpolished) 7. Brent (not polished) 8. 13bmaniac (not polished) 9. silverfd3s ( not polished) Oil Pan: 1.d33 (Danny) 2. 3. Fuel Rails 1.proz07 (4 port) 2.silverfd3s (matching rail for manifold)depending price 3.

03-15-2008, 08:36 AM	#44
Max_Spd The Newbie Join Date: Mar 2008 iTrader: (0) Posts: 21 Rep Power: 0	Ok so lets get this thing expedited PS if anyone wants i have my 95/JDM LIM for sale which has no EGR and all block off plates installed...