GTUs 20B N/A Build Thread

Christopher W. · 05-26-2009, 05:34 PM

I cut and pasted Logan's post on my thread from the other forum. All of the comments here are from Logan.

Logan aka GtoRx7:

Update with pics

Finally getting a chance to post up some progress pics. Keep in mind that this is a dummy engine. Still waiting for some parts before assembly. We finished up the custom ignition mounts, and built the ignition wires (color coded for leading and trailing).

Also finalized the 20b conversion mounts for FC's. This set for Chris were the prototypes. All TIG welded and basically indestructible. I always disliked the mounts offered by other companies, and the lack of triangulation. So this solved those issues.

And of course the 20b header! So many hours went into this design. I will post all the details of it in our vendor section. The first two pics is sitting next to its twin, which is going to singapore for a n/a 3 rotor FD.

Shot of the engine mounts from below. They are not fully bolted on.

Stay tuned for more stuff on Christopher's Car!

To_Slow · 05-26-2009, 06:05 PM

WoW realy nice fab work.... The manifolds look realy good...

WE3RX7 · 05-26-2009, 09:34 PM

That exhaust header is amazing... good work.

***Herblenny*** · 05-27-2009, 08:33 AM

WOW!! Nice!

To_Slow · 05-27-2009, 09:10 AM

This right here gives me motivation to start my manifold...

need RX7 · 05-27-2009, 02:29 PM

Is this a build thread or an art exhibit?

Incredible work, awesome job so far.

Christopher W. · 05-27-2009, 03:37 PM

Quote:

Originally Posted by need RX7

Is this a build thread or an art exhibit?

Yes to both....

Jeff20B · 05-28-2009, 12:44 PM

What thickness steel on those motor mounts?

Christopher W. · 05-28-2009, 03:32 PM

Quote:

Originally Posted by Jeff20B

What thickness steel on those motor mounts?

1/8"

MaczPayne · 05-28-2009, 06:24 PM

Wow, I can only imagine the throttle response you'll get from this motor.

I've always loved n/a's, power on demand, responsive, FUN!

Phoenix7 · 05-28-2009, 06:33 PM

seriously the most awesome build yet. Meticulous and just pure eye candy.

13bpower · 07-27-2009, 09:56 PM

I wish i had an intirior as clean as this..

Silver86 · 07-27-2009, 11:39 PM

in for the awesomeness!

rx7mechusa · 07-28-2009, 12:32 AM

Looks awesome man!!

Drama · 07-28-2009, 10:22 AM

Quote:

Originally Posted by rx7mechusa

Looks awesome man!!

Plus 1

05-26-2009, 05:34 PM	#31
Christopher W. Rotary Fan in Training Join Date: Mar 2008 iTrader: (0) Posts: 98 Rep Power: 17	I cut and pasted Logan's post on my thread from the other forum. All of the comments here are from Logan. Logan aka GtoRx7: Update with pics Finally getting a chance to post up some progress pics. Keep in mind that this is a dummy engine. Still waiting for some parts before assembly. We finished up the custom ignition mounts, and built the ignition wires (color coded for leading and trailing). Also finalized the 20b conversion mounts for FC's. This set for Chris were the prototypes. All TIG welded and basically indestructible. I always disliked the mounts offered by other companies, and the lack of triangulation. So this solved those issues. And of course the 20b header! So many hours went into this design. I will post all the details of it in our vendor section. The first two pics is sitting next to its twin, which is going to singapore for a n/a 3 rotor FD. Shot of the engine mounts from below. They are not fully bolted on. Stay tuned for more stuff on Christopher's Car! Last edited by Christopher W.; 05-26-2009 at 10:20 PM..

05-26-2009, 06:05 PM	#32
To_Slow Rotary Fanatic Join Date: Feb 2008 Location: Shelby Twp MI. iTrader: (1) Posts: 315 Rep Power: 17	WoW realy nice fab work.... The manifolds look realy good... __________________ My link

05-27-2009, 08:33 AM	#34
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 iTrader: (11) Posts: 644 Rep Power: 10	WOW!! Nice! __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

05-27-2009, 09:10 AM	#35
To_Slow Rotary Fanatic Join Date: Feb 2008 Location: Shelby Twp MI. iTrader: (1) Posts: 315 Rep Power: 17	This right here gives me motivation to start my manifold... __________________ My link

05-27-2009, 02:29 PM	#36
need RX7 Clean S4 Nutswinger Join Date: Mar 2008 Location: Sterling Heights, MI iTrader: (0) Posts: 485 Rep Power: 17	Is this a build thread or an art exhibit? Incredible work, awesome job so far. __________________ -Ted -1986 Mazda RX7 Sport [DD/beater]: engine finally let go at 205k. parts car status. -1986 Mazda RX7 base [resto-mod project]: S5 n/a swap in progress.

05-26-2009, 09:34 PM	#33
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA iTrader: (1) Posts: 1,812 Rep Power: 18	That exhaust header is amazing... good work.

05-28-2009, 12:44 PM	#38
Jeff20B Rotary Fanatic Join Date: Mar 2008 iTrader: (1) Posts: 215 Rep Power: 17	What thickness steel on those motor mounts?

05-28-2009, 06:24 PM	#40
MaczPayne Bah! Join Date: Mar 2008 Location: Riverside, SoCal iTrader: (1) Posts: 442 Rep Power: 17	Wow, I can only imagine the throttle response you'll get from this motor. I've always loved n/a's, power on demand, responsive, FUN! __________________ Johnson TA FC in the works!

07-27-2009, 09:56 PM	#42
13bpower Rotary Fan in Training Join Date: May 2008 Location: New hope mn iTrader: (0) Posts: 57 Rep Power: 17	I wish i had an intirior as clean as this..

07-27-2009, 11:39 PM	#43
Silver86 now what? Join Date: Jul 2009 Location: SE Wisconsin iTrader: (0) Posts: 178 Rep Power: 16	in for the awesomeness! __________________ 1986 Rx7 coupe - arctic silver - sold aka - 20bforme

07-28-2009, 12:32 AM	#44
rx7mechusa no no come on start plz?! Join Date: Jul 2009 Location: FT. Campbell iTrader: (0) Posts: 56 Rep Power: 16	Looks awesome man!! __________________ US ARMY-OH 58D(R) Helicopter Mechanic Cars- 1988 10th AE 1993 Nissan Pathfinder (off road fun truck) 1999 GMC Suburban (10thAE personal transportation)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode