My RX7SP build up

[Fendamonky]

Originally Posted by RICE RACING

p.s. I can supply just the COP adaptors and end users can deal with the headaches of custom brackets but be warned its not easy and poor mounting can cause issues!

Meh, that's like getting a Thoroughbred for racing but ONLY buying the bridle, because adding the saddle would take too much extra money...

Screw that! I'm not rich by any means, but half-assing a COP setup (from a consumers end) is just going to be more trouble than it's worth I think.

[speedjunkie]

Originally Posted by Fendamonky

Meh, that's like getting a Thoroughbred for racing but ONLY buying the bridle, because adding the saddle would take too much extra money...

Screw that! I'm not rich by any means, but half-assing a COP setup (from a consumers end) is just going to be more trouble than it's worth I think.

Fully agree. No way I'd get just the adapters, not when the brackets are that nice and well thought out. My buddy said he'd measure my setup for me, between the engine and water inj pump. I asked him to check on the PS and AC pump clearance too, but I figured someone else will probably get back to this before that.

[RICE RACING]

............

[Dannobre]

When do we get to play with a set of these?

[RICE RACING]

Originally Posted by Dannobre

When do we get to play with a set of these?

very soon

[Dannobre]

Hurry up then.....I have a couple of engines to build.....

We could try them in an 1100HP Methanol 7 sec drag motor if you want to beat on them some

[RICE RACING]

..............

[Dannobre]

Damn...1300HP 2 rotor...that's a lot of boost

[RICE RACING]

I also finished a version of the COP in M&W CDI form, its interchangeable with the IGN-1A type coils too

[chibikougan]

Fine just take all my monies Peter!

Or

Where do I start direct depositing my monies in you're account?

Number?

[RICE RACING]

RR bespoke design rubber sealing boots!




M&W system all done! contact and boot finished
Price to follow......


RR bespoke boots and springs for the M&W CDI option, all completed, should be in my hands soon, got a serious car where you want the best engineered coil mounting solutions? then this is what you want, forever promised by others and never delivered!

RR way from design idea to production reality in less than 3 weeks!!!!

Separating Facts from Fiction! in days................... NOT FUCKING YEARS unlike on some forums !!!!!

[sa22c]

I will be mighty tempted on a 250mJ CDI COP setup in the future!

I'm interested in a review of the Ohlin's coilovers. After a few years of ownership are you still happy wit them? Is there height adjustment range adequate for a true street / track car?

Have you driven anything with better handling and comfort in the suspension department in the time since you bought them?

[RICE RACING]

Originally Posted by sa22c

I will be mighty tempted on a 250mJ CDI COP setup in the future!

I'm interested in a review of the Ohlin's coilovers. After a few years of ownership are you still happy wit them? Is there height adjustment range adequate for a true street / track car?

Have you driven anything with better handling and comfort in the suspension department in the time since you bought them?

While I have not owned everything myself I have had the opportunity to drive LOTS of cars fitted with all the big brands inc race stuff made here in Australia and my own opinion is nothing is better than the Ohlins, my car is a street car #1 and used as such, the suspension is perfect for that and good enough on track too.

Spring rate and damper settings are spot on, very comfortable with zero bottoming at full pace, cant ask for anything more.

I like them anyway.

[sa22c]

Originally Posted by RICE RACING

While I have not owned everything myself I have had the opportunity to drive LOTS of cars fitted with all the big brands inc race stuff made here in Australia and my own opinion is nothing is better than the Ohlins, my car is a street car #1 and used as such, the suspension is perfect for that and good enough on track too.

Spring rate and damper settings are spot on, very comfortable with zero bottoming at full pace, cant ask for anything more.

I like them anyway.

When you say Race stuff made here in Australia are you talking about MCA race series suspension? The high end ohlins sound awesome. Can you give an indication of height in mm to front and rear guard and roughly where you are in terms of bottom perch adjustment? Do yours have helper springs front and rear?

[RICE RACING]

Originally Posted by sa22c

When you say Race stuff made here in Australia are you talking about MCA race series suspension? The high end ohlins sound awesome. Can you give an indication of height in mm to front and rear guard and roughly where you are in terms of bottom perch adjustment? Do yours have helper springs front and rear?

Proflex mainly

ride height is legal 100mm of ground at lowest point is how I set it up.
Car can be jacked higher or much lower, just depends how much pre load on springs, all 4 have helper.

When I was in NSW I did a blue slip inspection with my Ohlins in and set to factory ride height spec for the SP.

Then changed it to minimum legal height.