Chickenwafer's Never Over Turbo 8 Build

chickenwafer · 06-16-2009, 01:08 AM

Quote:

Originally Posted by joff

No problem dude! I love a well done engine bay most. Not much for the stock looking engine bay and totally digging that blue. Its too bad you can't really see that turbo.

Hows the high temp enamel holding up on the turbo manifold though?

Not terrible but not great, LOL. I had the car in the air yesterday and checked it out actually, some of it is starting to flake off. But still no rust! If I could do it over again I would have gotten them ceramic coated

And about the doors, it's a weld on kit and required A LOT of work, bottom line is they're not coming off, LOL. I agree they got played out and Civic's look ghey with them, but I honestly think the 8 lends itself well to the exotic look. They just look so sinister. I like em, so they stay, LOL. There are a select few cars that can pull off the look and I think the 8 is one of them

theorie · 06-16-2009, 09:32 AM

alright alright, well anyway, the car looks great and the turbo setup looks pretty sweet as well.

have you run it at the track yet? or on the dyno?

***Herblenny*** · 06-16-2009, 10:03 AM

WOW! great build!

chickenwafer · 06-16-2009, 01:36 PM

Quote:

Originally Posted by theorie

alright alright, well anyway, the car looks great and the turbo setup looks pretty sweet as well.

have you run it at the track yet? or on the dyno?

Haven't gotten it to the track yet. It always seems whenever the HPDE events come up I got something going on, or am broke LOL.

Dyno, I did 302-rwhp, 232 tq @ 9psi with a very safe tune, 10.9 AFRs and retarded timing. I've done tuning since then and would love to get her back on the dyno soon!

Quote:

Originally Posted by Herblenny

WOW! great build!

thanks man!

Kane · 06-16-2009, 03:20 PM

Meh... it is ok I guess....

mazdamaniac · 06-16-2009, 03:35 PM

Quote:

Originally Posted by Kane

Meh... it is ok I guess....

Seriously!

Better have a word with his fabricator...

Kane · 06-16-2009, 07:19 PM

Quote:

Originally Posted by mazdamaniac

Seriously!

Better have a word with his fabricator...

No soup for you!!!

RCCAZ 1 · 06-16-2009, 10:51 PM

Dave,

Wow... awesome build. I know that we've only met a few times, but I'm impressed with what you've done to your ride. The fabrication work is top notch and I love the attention to detail. Very, very nice!!

chickenwafer · 06-16-2009, 11:03 PM

Quote:

Originally Posted by mazdamaniac

Seriously!

Better have a word with his fabricator...

I know, I need to have words with that guy.....

Quote:

Originally Posted by RCCAZ 1

Dave,

Wow... awesome build. I know that we've only met a few times, but I'm impressed with what you've done to your ride. The fabrication work is top notch and I love the attention to detail. Very, very nice!!

Thanks Tim! It means a lot! I try to build things clean....my OCD comes out in my car LOL

When is your FD going to be done? Love that yellow beast

RCCAZ 1 · 06-17-2009, 01:45 PM

Quote:

Originally Posted by chickenwafer

I know, I need to have words with that guy.....

Thanks Tim! It means a lot! I try to build things clean....my OCD comes out in my car LOL

When is your FD going to be done? Love that yellow beast

Thanks Dave! I'm rolling, albiet with a partial tune for now. While tuning last week at UMS we ran into a "small issue" with my WG lines starting to melt (*yikes*), so I need to re-route the lines and fix the problem. Probably going to fab up some hardlines to remove the "worry" factor. We're having an RCCAZ club gathering this coming Saturday night on the NW side (83rd Av & Beardsley). I know it's a little short notice on the invite, but come up if you can. Would love to see your final product!

chickenwafer · 06-17-2009, 04:41 PM

I will try and make it. I'm leaving Phoenix next friday so this is really my last weekend to do anything

RCCAZ 1 · 06-17-2009, 05:29 PM

Quote:

Originally Posted by chickenwafer

I will try and make it. I'm leaving Phoenix next friday so this is really my last weekend to do anything

Not a problem. I just want you and others to know that even though our club has yearly dues, everyone's always welcome. I love to see people's projects and ways to approach problems. It's how we all make our rides better!

RCCAZ 1 · 06-17-2009, 05:33 PM

Quote:

Originally Posted by mazdamaniac

Seriously!

Better have a word with his fabricator...

Look at the teeth on that Fabricator

It actually looks quite a bit like you M2

Hey, please bring back the "girl-on-girl" avatars. Somehow the clean-cut Japan-amation just doesn't fit your style (IMO)

Are you going to church or something??

REVIT93RX7 · 06-18-2009, 07:51 PM

The build looks terrific. I know you had a link to the car PC web site. What was the model number of the PC you used.

Thanks

chickenwafer · 06-19-2009, 12:36 AM

^No model number, it was a custom build built by a friend.

check him out www.boxcarsolutions.com

06-16-2009, 09:32 AM	#17
theorie VRR PSSH Join Date: Apr 2009 Location: Sarasota, FL iTrader: (0) Posts: 113 Rep Power: 16	alright alright, well anyway, the car looks great and the turbo setup looks pretty sweet as well. have you run it at the track yet? or on the dyno? __________________ 1993 SSM, 20B (D449), SINGLE-TURBO, DIY-BUILD IN THE WORKS... \|Build Thread\| 1993 BB, 13B, SINGLE-TURBO, DAILY DRIVER \|Build Thread\| MY FACEBOOK PROFILE // BLACK LABEL ENGINEERING // ADVANCED RACE TECH // IR PERFORMANCE // THE BOOST LAB // [url=rotaryaddicts.com]

06-16-2009, 10:03 AM	#18
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 iTrader: (11) Posts: 644 Rep Power: 10	WOW! great build! __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

06-16-2009, 03:20 PM	#20
Kane All about the O2 Join Date: Sep 2008 iTrader: (0) Posts: 295 Rep Power: 17	Meh... it is ok I guess.... __________________ My 2007 Turbocharged RX8

06-18-2009, 07:51 PM	#29
REVIT93RX7 REVIT Join Date: Sep 2008 Location: Palm Bay, FL iTrader: (0) Posts: 90 Rep Power: 17	Car PC The build looks terrific. I know you had a link to the car PC web site. What was the model number of the PC you used. Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-16-2009, 10:51 PM	#23
RCCAZ 1 Rotary Fanatic Join Date: Mar 2008 Location: Phoenix, AZ iTrader: (0) Posts: 288 Rep Power: 17	Dave, Wow... awesome build. I know that we've only met a few times, but I'm impressed with what you've done to your ride. The fabrication work is top notch and I love the attention to detail. Very, very nice!!

06-17-2009, 04:41 PM	#26
chickenwafer Boost Whore Join Date: Jun 2009 Location: Northern Colorado iTrader: (0) Posts: 33 Rep Power: 0	I will try and make it. I'm leaving Phoenix next friday so this is really my last weekend to do anything

06-19-2009, 12:36 AM	#30
chickenwafer Boost Whore Join Date: Jun 2009 Location: Northern Colorado iTrader: (0) Posts: 33 Rep Power: 0	^No model number, it was a custom build built by a friend. check him out www.boxcarsolutions.com