Auto Power Roll cages and Roll Bars GB - Page 2

SHPmainMAN · 03-02-2009, 12:44 AM

Eric send me a PM about this and i can see if i can work this into your current order and make this a little cheaper for you unless you would want to wait on a group buy.

As far as the convertible im almost 100% sure it will work but i will double check with autopower tomorrow. I seen it in an S2000 and the convertible top worked up and down with no kinks against the roll bar and it fit very well with the top up. but again, i will double check on your car.

As for Drag racing certified. ill also check on that when they open tomorrow. i know the bolt in roll cage is SCCA and NASA legal.

-Mike

bigtony08 · 03-02-2009, 01:56 AM

thank you

SHPmainMAN · 03-03-2009, 12:59 PM

The owner of Autopower is getting me some install pictures on the RX7's FC and FD. and im sure some of the pictures will answer some questions like mounting points, seat travel and harness points.

CLH · 03-05-2009, 03:17 PM

What would the shipping cost to 98166 be for the 4-point w/harness bar?

SHPmainMAN · 03-11-2009, 04:11 PM

Shipping on these are going to be $115 within the city and $135 in Rural areas
ill add it to the original Post

RX-7 Chris · 04-01-2009, 11:23 AM

I wish I had the money for this for my FB.

WE3RX7 · 04-13-2009, 01:57 PM

I dont think chrome molly passes sanctioning bodies here in the US. I believe that was the issue I had with the Cusco bar I originally wanted.

Does the autopower full cage (6 point) go through the dash, or cut down right in front like that S13 w/ full interior?

karl0003 · 04-13-2009, 11:30 PM

mike i want this. i want the race cage. it looks like a sick setup. hit me up when you get some pictures of it in an fd

SHPmainMAN · 05-13-2009, 04:34 PM

i guess i might have to just order one for myself then get some pics huh?

03-02-2009, 12:44 AM	#16
SHPmainMAN SHP Motorsports Join Date: Jun 2008 Location: Michigan Posts: 256 Rep Power: 18	Eric send me a PM about this and i can see if i can work this into your current order and make this a little cheaper for you unless you would want to wait on a group buy. As far as the convertible im almost 100% sure it will work but i will double check with autopower tomorrow. I seen it in an S2000 and the convertible top worked up and down with no kinks against the roll bar and it fit very well with the top up. but again, i will double check on your car. As for Drag racing certified. ill also check on that when they open tomorrow. i know the bolt in roll cage is SCCA and NASA legal. -Mike __________________ SEIBON Summer Special For FD and RX8 1990 Canadian GXL-TII Raffle. Vote NOW!!

03-03-2009, 12:59 PM	#18
SHPmainMAN SHP Motorsports Join Date: Jun 2008 Location: Michigan Posts: 256 Rep Power: 18	The owner of Autopower is getting me some install pictures on the RX7's FC and FD. and im sure some of the pictures will answer some questions like mounting points, seat travel and harness points. __________________ SEIBON Summer Special For FD and RX8 1990 Canadian GXL-TII Raffle. Vote NOW!!

03-11-2009, 04:11 PM	#20
SHPmainMAN SHP Motorsports Join Date: Jun 2008 Location: Michigan Posts: 256 Rep Power: 18	Shipping on these are going to be $115 within the city and $135 in Rural areas ill add it to the original Post __________________ SEIBON Summer Special For FD and RX8 1990 Canadian GXL-TII Raffle. Vote NOW!!

04-13-2009, 11:30 PM	#23
karl0003 The Newbie Join Date: Jun 2008 Posts: 27 Rep Power: 0	mike i want this. i want the race cage. it looks like a sick setup. hit me up when you get some pictures of it in an fd __________________ 3mm seals,Street Port,Garrett T67,Tial wastegate,XS Power Manifold,Greddy 2 Row FMIC,APEX PFC & commander,Dual Oil Coolers,Greddy titanium catback,850 injectors and 1600 2nds,act clutch, Greddy boost controler, Steve Kan tuned

05-13-2009, 04:34 PM	#24
SHPmainMAN SHP Motorsports Join Date: Jun 2008 Location: Michigan Posts: 256 Rep Power: 18	i guess i might have to just order one for myself then get some pics huh? __________________ SEIBON Summer Special For FD and RX8 1990 Canadian GXL-TII Raffle. Vote NOW!!

03-02-2009, 01:56 AM	#17
bigtony08 obsessed rotard Join Date: Jan 2009 Posts: 249 Rep Power: 17	thank you

03-05-2009, 03:17 PM	#19
CLH The Newbie Join Date: Feb 2008 Location: Burien, WA Posts: 5 Rep Power: 0	What would the shipping cost to 98166 be for the 4-point w/harness bar?

04-01-2009, 11:23 AM	#21
RX-7 Chris Rotary Fanatic Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 132 Rep Power: 18	I wish I had the money for this for my FB.

04-13-2009, 01:57 PM	#22
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA Posts: 1,812 Rep Power: 19	I dont think chrome molly passes sanctioning bodies here in the US. I believe that was the issue I had with the Cusco bar I originally wanted. Does the autopower full cage (6 point) go through the dash, or cut down right in front like that S13 w/ full interior?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode