My '76 Rx-4 hardtop build.

Buggy · 11-10-2010, 09:47 AM

That just left a few other small loose ends to take care of like mounting my gauges, trim, etc. For gauges I decided to go with the external look and ordered Autometer pro comp marine gauges. Over the course of this summer I got most of the things done on the car that I wanted. I changed the exhaust to make it a little more tolerable by swapping out the existing mufflers for a Racing Beat road race presilencer and one of their 3" universal mufflers. I also changed a few different things with the carburetor and got it running much better. Some pictures from this past summer.

Pictures 1 120.jpg Pictures 1 121.jpg Rx-4 gauges.jpg Rx4-sherway.jpg

Buggy · 11-10-2010, 09:55 AM

Here is a text version of the results from the dyno day we had. Not too shabby, but hopefully with a few modifications I can pull some more power from this engine. It should be able to see 200whp without a problem.

RX7 Bryon 07Aug10 Run 4T.Txt

Buggy · 11-10-2010, 10:00 AM

That pretty much brings us to present day. The car is now in storage for winter, but with any luck I'll be wrenching away on it this winter at some point. I have a GSL-SE front suspension and brake swap planned as well as a GSL-SE rear axle and brake swap. I want to send the stock rear leaf springs out and have them re arched and add a leaf as well to stiffen them up. All of this should lower the car very nicely and I'll be getting a set of 15" rims to go along with all of that. I also want to change my ignition setup from DILDFIS to an electronic setup using 4 individual coils. Keep watching this thread for updates, this car is not even close to being complete yet.

RX-7 Chris · 11-10-2010, 11:44 AM

cool build

Prodigy · 11-10-2010, 04:00 PM

Quote:

Originally Posted by RX-7 Chris

cool build

agreed.... this is a sweet build... Love the color..

J.

Buggy · 11-10-2010, 04:32 PM

Thanks for the comments guys. I liked the colour as well, that's why I kept it that way. The car was originally red, but it was painted that colour sometime before I bought it. It is a later Mazda colour. I'll have to get the paint code from my body man.

dr50376272 · 11-22-2010, 07:10 AM

here is my website:

www.kagoshimaenglish.com/rx4.htm

and youtube videos:

http://www.youtube.com/user/1973mazdarx4coupe

updated just now

thankyou!

david

speedjunkie · 11-22-2010, 09:41 AM

Nice! Came out pretty clean. I've never seen a big tach on the outside like that haha.

Buggy · 11-22-2010, 06:24 PM

Ya that tach is a little excessive, but it was the smallest I could get in the autometer marine series that went to 10k. It's only 5" I think....

Buggy · 12-21-2010, 09:21 PM

Pulling this one out of the depths. I've decided to attend DGRR 2011 and this is my car of choice. Time to get cracking on some work before the 3000km round trip. On this list will be:
-5 speed SA transmission swap
-some sort of lightweight flywheel
-repair my ignition issues
-rebuild the weber to fix some fuel leaks and new taller velocity stacks with mesh air cleaners
-suspension and brake swap if I can find rims
-some other odds and ends that I've neglected to take care of.

That should keep me out of trouble for a while.....

dr50376272 · 12-26-2010, 07:33 AM

beautiful ! my build is slow and painful

www.kagoshimaenglish.com/rx4.htm

***TitaniumTT*** · 12-26-2010, 01:53 PM

Quote:

Originally Posted by Buggy

Pulling this one out of the depths. I've decided to attend DGRR 2011 and this is my car of choice. Time to get cracking on some work before the 3000km round trip. On this list will be:
-5 speed SA transmission swap
-some sort of lightweight flywheel
-repair my ignition issues
-rebuild the weber to fix some fuel leaks and new taller velocity stacks with mesh air cleaners
-suspension and brake swap if I can find rims
-some other odds and ends that I've neglected to take care of.

That should keep me out of trouble for a while.....

I need me some sort of old school rotary and this thing is an inspiration for sure. Can't wait to see it at DGRR. Remember to bring a ton of carb jets on that trip.

Buggy · 12-26-2010, 06:02 PM

I have spare jets and a full set of numbered drill bits. I'm prepared for any situation.

Thanks for the compliments TTT. Means a lot coming from someone like yourself that has built a killer car of their own and knows the work that goes into it. I'm looking forward to the trip to DGRR with this beast, and I hope to see you there.

Buggy · 12-31-2010, 07:24 AM

Seeing as how it warmed up to above 0 degrees I fired the old girl up last night. Now I have a coolant leak to fix as well apparently at the thermostat housing.....

speedjunkie · 12-31-2010, 03:35 PM

Sorry to hear of your troubles. I hope to see you at DGRR though, if we can make it haha.

11-10-2010, 09:47 AM	#16
Buggy I've been Wankeled! Join Date: Apr 2010 Location: Mildmay, Ontario, Canada iTrader: (0) Posts: 260 Rep Power: 15	That just left a few other small loose ends to take care of like mounting my gauges, trim, etc. For gauges I decided to go with the external look and ordered Autometer pro comp marine gauges. Over the course of this summer I got most of the things done on the car that I wanted. I changed the exhaust to make it a little more tolerable by swapping out the existing mufflers for a Racing Beat road race presilencer and one of their 3" universal mufflers. I also changed a few different things with the carburetor and got it running much better. Some pictures from this past summer. Pictures 1 120.jpg Pictures 1 121.jpg Rx-4 gauges.jpg Rx4-sherway.jpg __________________ 1976 Rx-4 hardtop. Half bridge 3B 13B, S5 NA rotors, Renesis e-shaft, stat gears, and bearings, balanced rotating assembly, RE dual weber 36 DCD's 203rwhp 137ft-lbs torque DGRR 2011 3rd place 1974 Rx-4 all original 27,000 miles 1988 Rx-7 TII 320rwhp. DGRR 2012 3rd place

11-10-2010, 09:55 AM	#17
Buggy I've been Wankeled! Join Date: Apr 2010 Location: Mildmay, Ontario, Canada iTrader: (0) Posts: 260 Rep Power: 15	Here is a text version of the results from the dyno day we had. Not too shabby, but hopefully with a few modifications I can pull some more power from this engine. It should be able to see 200whp without a problem. RX7 Bryon 07Aug10 Run 4T.Txt __________________ 1976 Rx-4 hardtop. Half bridge 3B 13B, S5 NA rotors, Renesis e-shaft, stat gears, and bearings, balanced rotating assembly, RE dual weber 36 DCD's 203rwhp 137ft-lbs torque DGRR 2011 3rd place 1974 Rx-4 all original 27,000 miles 1988 Rx-7 TII 320rwhp. DGRR 2012 3rd place

11-10-2010, 10:00 AM	#18
Buggy I've been Wankeled! Join Date: Apr 2010 Location: Mildmay, Ontario, Canada iTrader: (0) Posts: 260 Rep Power: 15	That pretty much brings us to present day. The car is now in storage for winter, but with any luck I'll be wrenching away on it this winter at some point. I have a GSL-SE front suspension and brake swap planned as well as a GSL-SE rear axle and brake swap. I want to send the stock rear leaf springs out and have them re arched and add a leaf as well to stiffen them up. All of this should lower the car very nicely and I'll be getting a set of 15" rims to go along with all of that. I also want to change my ignition setup from DILDFIS to an electronic setup using 4 individual coils. Keep watching this thread for updates, this car is not even close to being complete yet. __________________ 1976 Rx-4 hardtop. Half bridge 3B 13B, S5 NA rotors, Renesis e-shaft, stat gears, and bearings, balanced rotating assembly, RE dual weber 36 DCD's 203rwhp 137ft-lbs torque DGRR 2011 3rd place 1974 Rx-4 all original 27,000 miles 1988 Rx-7 TII 320rwhp. DGRR 2012 3rd place

11-10-2010, 04:32 PM	#21
Buggy I've been Wankeled! Join Date: Apr 2010 Location: Mildmay, Ontario, Canada iTrader: (0) Posts: 260 Rep Power: 15	Thanks for the comments guys. I liked the colour as well, that's why I kept it that way. The car was originally red, but it was painted that colour sometime before I bought it. It is a later Mazda colour. I'll have to get the paint code from my body man. __________________ 1976 Rx-4 hardtop. Half bridge 3B 13B, S5 NA rotors, Renesis e-shaft, stat gears, and bearings, balanced rotating assembly, RE dual weber 36 DCD's 203rwhp 137ft-lbs torque DGRR 2011 3rd place 1974 Rx-4 all original 27,000 miles 1988 Rx-7 TII 320rwhp. DGRR 2012 3rd place

11-22-2010, 06:24 PM	#24
Buggy I've been Wankeled! Join Date: Apr 2010 Location: Mildmay, Ontario, Canada iTrader: (0) Posts: 260 Rep Power: 15	Ya that tach is a little excessive, but it was the smallest I could get in the autometer marine series that went to 10k. It's only 5" I think.... __________________ 1976 Rx-4 hardtop. Half bridge 3B 13B, S5 NA rotors, Renesis e-shaft, stat gears, and bearings, balanced rotating assembly, RE dual weber 36 DCD's 203rwhp 137ft-lbs torque DGRR 2011 3rd place 1974 Rx-4 all original 27,000 miles 1988 Rx-7 TII 320rwhp. DGRR 2012 3rd place

11-10-2010, 11:44 AM	#19
RX-7 Chris Rotary Fanatic Join Date: Mar 2008 Location: Colorado Springs, CO iTrader: (2) Posts: 132 Rep Power: 17	cool build

11-22-2010, 07:10 AM	#22
dr50376272 Rotary Fan in Training Join Date: Oct 2010 iTrader: (0) Posts: 80 Rep Power: 15	here is my website: www.kagoshimaenglish.com/rx4.htm and youtube videos: http://www.youtube.com/user/1973mazdarx4coupe updated just now thankyou! david

11-22-2010, 09:41 AM	#23
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO iTrader: (1) Posts: 2,089 Rep Power: 19	Nice! Came out pretty clean. I've never seen a big tach on the outside like that haha.

12-21-2010, 09:21 PM	#25
Buggy I've been Wankeled! Join Date: Apr 2010 Location: Mildmay, Ontario, Canada iTrader: (0) Posts: 260 Rep Power: 15	Pulling this one out of the depths. I've decided to attend DGRR 2011 and this is my car of choice. Time to get cracking on some work before the 3000km round trip. On this list will be: -5 speed SA transmission swap -some sort of lightweight flywheel -repair my ignition issues -rebuild the weber to fix some fuel leaks and new taller velocity stacks with mesh air cleaners -suspension and brake swap if I can find rims -some other odds and ends that I've neglected to take care of. That should keep me out of trouble for a while..... __________________ 1976 Rx-4 hardtop. Half bridge 3B 13B, S5 NA rotors, Renesis e-shaft, stat gears, and bearings, balanced rotating assembly, RE dual weber 36 DCD's 203rwhp 137ft-lbs torque DGRR 2011 3rd place 1974 Rx-4 all original 27,000 miles 1988 Rx-7 TII 320rwhp. DGRR 2012 3rd place

12-26-2010, 07:33 AM	#26
dr50376272 Rotary Fan in Training Join Date: Oct 2010 iTrader: (0) Posts: 80 Rep Power: 15	beautiful ! my build is slow and painful www.kagoshimaenglish.com/rx4.htm

12-26-2010, 06:02 PM	#28
Buggy I've been Wankeled! Join Date: Apr 2010 Location: Mildmay, Ontario, Canada iTrader: (0) Posts: 260 Rep Power: 15	I have spare jets and a full set of numbered drill bits. I'm prepared for any situation. Thanks for the compliments TTT. Means a lot coming from someone like yourself that has built a killer car of their own and knows the work that goes into it. I'm looking forward to the trip to DGRR with this beast, and I hope to see you there. __________________ 1976 Rx-4 hardtop. Half bridge 3B 13B, S5 NA rotors, Renesis e-shaft, stat gears, and bearings, balanced rotating assembly, RE dual weber 36 DCD's 203rwhp 137ft-lbs torque DGRR 2011 3rd place 1974 Rx-4 all original 27,000 miles 1988 Rx-7 TII 320rwhp. DGRR 2012 3rd place

12-31-2010, 07:24 AM	#29
Buggy I've been Wankeled! Join Date: Apr 2010 Location: Mildmay, Ontario, Canada iTrader: (0) Posts: 260 Rep Power: 15	Seeing as how it warmed up to above 0 degrees I fired the old girl up last night. Now I have a coolant leak to fix as well apparently at the thermostat housing..... __________________ 1976 Rx-4 hardtop. Half bridge 3B 13B, S5 NA rotors, Renesis e-shaft, stat gears, and bearings, balanced rotating assembly, RE dual weber 36 DCD's 203rwhp 137ft-lbs torque DGRR 2011 3rd place 1974 Rx-4 all original 27,000 miles 1988 Rx-7 TII 320rwhp. DGRR 2012 3rd place

12-31-2010, 03:35 PM	#30
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO iTrader: (1) Posts: 2,089 Rep Power: 19	Sorry to hear of your troubles. I hope to see you at DGRR though, if we can make it haha.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode