RXtacy's slooow build up - Page 13

chibikougan · 02-22-2016, 10:57 PM

An invisible FD!

***TitaniumTT*** · 02-23-2016, 09:11 AM

Quote:

Originally Posted by chibikougan

An invisible FD!

Nah, it's clearly visible and my collection of in-op cars grew over the weekend

speedjunkie · 02-23-2016, 12:52 AM

Quote:

Originally Posted by GySgtFrank

Such fun.

Exactly what I was thinking lol.

I wouldn't mind doing a wire tuck on mine. And by that I mean I wouldn't mind paying someone else to do a wire tuck on my harness while I don't play with the idea of blowing my brains out. Wanna do mine too? lol

RXtacy · 02-23-2016, 09:12 AM

Quote:

Originally Posted by chibikougan

An invisible FD!

It's got the 007 package.

Quote:

Originally Posted by GySgtFrank

Such fun.

Quote:

Originally Posted by speedjunkie

Exactly what I was thinking lol.

I wouldn't mind doing a wire tuck on mine. And by that I mean I wouldn't mind paying someone else to do a wire tuck on my harness while I don't play with the idea of blowing my brains out. Wanna do mine too? lol

Other than a few (and by few I mean a solid 10 minutes) of cussing out the Mazda engineers when I realized I had to pull the dash, blower, and evap core to get the harness out it hasn't been too bad

I started stripping the wrap last night. Throw some music on and go to town, it's almost cathartic. We'll see if I'm still saying that by the end

***TitaniumTT*** · 02-23-2016, 10:28 AM

My feeling on body work

RXtacy · 02-23-2016, 11:25 AM

Quote:

Originally Posted by TitaniumTT

My feeling on body work

I knew you were going to make that correlation

Feel free to paint the bay on your own if you would like

***TitaniumTT*** · 02-23-2016, 04:05 PM

Where's the hours of block sanding in an engine bay?

RXtacy · 02-23-2016, 04:20 PM

Quote:

Originally Posted by TitaniumTT

Where's the hours of block sanding in an engine bay?

You can remove all the seam sealer and putty everything smooth how about that?

***TitaniumTT*** · 02-23-2016, 04:36 PM

Right after all the welding and beating is done

hence the

After pulling the seam sealer you gonna seam weld?

RXtacy · 02-23-2016, 10:34 PM

Quote:

Originally Posted by TitaniumTT

Right after all the welding and beating is done

hence the

After pulling the seam sealer you gonna seam weld?

I meant in the entire bay, not just the wheel wells

We'll see how things are going when we get there.

RXtacy · 02-23-2016, 10:37 PM

Got the harness wrap stripped. Started to remove excess, have a lot to go.

speedjunkie · 02-24-2016, 01:03 AM

Quote:

Originally Posted by RXtacy

Other than a few (and by few I mean a solid 10 minutes) of cussing out the Mazda engineers when I realized I had to pull the dash, blower, and evap core to get the harness out it hasn't been too bad

I started stripping the wrap last night. Throw some music on and go to town, it's almost cathartic. We'll see if I'm still saying that by the end

For the first 8 years or so of ownership I made it without having to pull the dash. In the last few years I've pulled it about three or four times, and I'm about to again. I'm really getting sick of it lol. And I pulled my front harness out last summer, I know your frustration lol.

***TitaniumTT*** · 02-24-2016, 09:08 AM

Total time about 2.5-3?

RXtacy · 02-24-2016, 09:37 AM

Quote:

Originally Posted by speedjunkie

For the first 8 years or so of ownership I made it without having to pull the dash. In the last few years I've pulled it about three or four times, and I'm about to again. I'm really getting sick of it lol. And I pulled my front harness out last summer, I know your frustration lol.

Yea I pulled it the first time a few years ago when I put in new carpet. Didn't like the idea of cutting the carpet around the heater core.

Quote:

Originally Posted by TitaniumTT

Total time about 2.5-3?

Yea that's about right. Probably more towards the 3 side, but I've been taking my time and labeling as I go too.

***TitaniumTT*** · 02-24-2016, 10:09 AM

Must label. Saves looking things up two or three times. I saw the blue tape. I either use that or a different color zip tie.

Don't forget there's going to be a bunch of wires, power and or grnd that are going to be spliced together. Like one grnd goes out to 5 different connectors.

Mike, I had a thought this morning..... how is the fuel pump wired exactly. If memory serves, it's going to take a signal from the ECU, run through the firewall side, up to the relay box, back through the resistor, back into the front harness and then connect to the rear harness and go off to the fuel pump. That wire that once powered the fuel pump, trace that back to the jump between the front are rear harness and take the front harness section of wire and run it over towards the ECU.

That can be the new trigger for the relays that will be in the trunk area.

02-23-2016, 10:28 AM	#5
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	My feeling on body work __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

02-23-2016, 04:05 PM	#7
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Where's the hours of block sanding in an engine bay? __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

02-23-2016, 04:36 PM	#9
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Right after all the welding and beating is done hence the After pulling the seam sealer you gonna seam weld? __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

02-24-2016, 09:08 AM	#13
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Total time about 2.5-3? __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

02-24-2016, 10:09 AM	#15
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Must label. Saves looking things up two or three times. I saw the blue tape. I either use that or a different color zip tie. Don't forget there's going to be a bunch of wires, power and or grnd that are going to be spliced together. Like one grnd goes out to 5 different connectors. Mike, I had a thought this morning..... how is the fuel pump wired exactly. If memory serves, it's going to take a signal from the ECU, run through the firewall side, up to the relay box, back through the resistor, back into the front harness and then connect to the rear harness and go off to the fuel pump. That wire that once powered the fuel pump, trace that back to the jump between the front are rear harness and take the front harness section of wire and run it over towards the ECU. That can be the new trigger for the relays that will be in the trunk area. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode